Zope 2.4.3 and Python 2.2
Hi there, are there any known issues or problem running Zope 2.4.3 under PYthon 2.2 instead of 2.1. I'am asking because my sysadmin has setup a new linux-box with RH7.3. RH7.3 only has Python 2.2 installed and there are no RPMs compiled against Python 2.2. If there are no problems a would try to build a src.rpm for RH 7.3 + Python 2.2. Thanks in advance, andre
Use Python 1.5.2 with Zope 2.4.X and Python 2.1.3 for Zope 2.5.X. Any other combination is *not* supported. -aj ----- Original Message ----- From: "Andre Schubert" <andre@km3.de> To: "zope" <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 07:47 Subject: [Zope-dev] Zope 2.4.3 and Python 2.2
Hi there,
are there any known issues or problem running Zope 2.4.3 under PYthon 2.2 instead of 2.1. I'am asking because my sysadmin has setup a new linux-box with RH7.3. RH7.3 only has Python 2.2 installed and there are no RPMs compiled against Python 2.2. If there are no problems a would try to build a src.rpm for RH 7.3 + Python 2.2.
Thanks in advance,
andre
_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )
On Wed, 21 Aug 2002 07:52:30 +0200 "Andreas Jung" <lists@andreas-jung.com> wrote:
Use Python 1.5.2 with Zope 2.4.X and Python 2.1.3 for Zope 2.5.X. Any other combination is *not* supported.
Why use Zope 2.4.X with Python 1.5.2 when i could find RPMs on zoep.org that requires Python 2.1.x ? And yes i know that this is not supported, but could there anything incompatible between Python 2.1 + Zope and Python 2.2 + Zope ? Greets,
-aj ----- Original Message ----- From: "Andre Schubert" <andre@km3.de> To: "zope" <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 07:47 Subject: [Zope-dev] Zope 2.4.3 and Python 2.2
Hi there,
are there any known issues or problem running Zope 2.4.3 under PYthon 2.2 instead of 2.1. I'am asking because my sysadmin has setup a new linux-box with RH7.3. RH7.3 only has Python 2.2 installed and there are no RPMs compiled against Python 2.2. If there are no problems a would try to build a src.rpm for RH 7.3 + Python 2.2.
Thanks in advance,
andre
_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )
_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )
Ups, my fault....Zope 2.4 or higher requires Python 2.1.X. Using Python 2.2 with Zope 2.4 or 2.5 is officially not supported. This issue has been discussed multiple times on the list. Please check the archives. Python 2.2 has been tested with Zope 2.5 but there is not supported. So use it as your own risk and don't cry when you have problems. Python 2.2 is required for Zope 3. -aj ----- Original Message ----- From: "Andre Schubert" <andre.schubert@km3.de> To: "Andreas Jung" <lists@andreas-jung.com> Cc: <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 08:06 Subject: Re: [Zope-dev] Zope 2.4.3 and Python 2.2
On Wed, 21 Aug 2002 07:52:30 +0200 "Andreas Jung" <lists@andreas-jung.com> wrote:
Use Python 1.5.2 with Zope 2.4.X and Python 2.1.3 for Zope 2.5.X. Any other combination is *not* supported.
Why use Zope 2.4.X with Python 1.5.2 when i could find RPMs on zoep.org that requires Python 2.1.x ? And yes i know that this is not supported, but could there anything incompatible between Python 2.1 + Zope and Python 2.2 + Zope ?
Greets,
-aj ----- Original Message ----- From: "Andre Schubert" <andre@km3.de> To: "zope" <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 07:47 Subject: [Zope-dev] Zope 2.4.3 and Python 2.2
Hi there,
are there any known issues or problem running Zope 2.4.3 under PYthon
2.2
instead of 2.1. I'am asking because my sysadmin has setup a new linux-box with RH7.3. RH7.3 only has Python 2.2 installed and there are no RPMs compiled against Python 2.2. If there are no problems a would try to build a src.rpm for RH 7.3 + Python 2.2.
Thanks in advance,
andre
_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )
_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )
----- Original Message ----- From: "Andreas Jung" <lists@andreas-jung.com> To: "Andre Schubert" <andre.schubert@km3.de> Cc: <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 08:19 Subject: Re: [Zope-dev] Zope 2.4.3 and Python 2.2
Ups, my fault....Zope 2.4 or higher requires Python 2.1.X.
Ups, really not my fault. Zope 2.4 still requires 1.5.X *never-think-about-zope-before-breakfast* Andreas
----- Original Message ----- From: "Andreas Jung" <andreas@andreas-jung.com> To: "Andreas Jung" <lists@andreas-jung.com>; "Andre Schubert" <andre.schubert@km3.de> Cc: <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 08:33 Subject: Re: [Zope-dev] Zope 2.4.3 and Python 2.2
----- Original Message ----- From: "Andreas Jung" <lists@andreas-jung.com> To: "Andre Schubert" <andre.schubert@km3.de> Cc: <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 08:19 Subject: Re: [Zope-dev] Zope 2.4.3 and Python 2.2
Ups, my fault....Zope 2.4 or higher requires Python 2.1.X.
Ups, really not my fault. Zope 2.4 still requires 1.5.X
*never-think-about-zope-before-breakfast* Andreas
argh...dlk@irc pointed out that Python 2.1 is required for 2.4.
From the README:
Zope 2.4 alpha 1 Features Added - Zope now requires Python 2.1. See the Zope 2.4 migration Sorry for the confusion ;-) *never-write-postings-with-less-than-two-cups-of-tea, Andreas
From: "Andreas Jung" <andreas@andreas-jung.com>
Ups, really not my fault. Zope 2.4 still requires 1.5.X
We didn't upgrade Easy Publisher from 2.3.3 to 2.4 because of the switch to Python 2.X, so no, I don't think so. You need coffee. :-)
----- Original Message ----- From: "Andre Schubert" <andre.schubert@km3.de> To: "Andreas Jung" <lists@andreas-jung.com> Cc: <zope-dev@zope.org> Sent: Wednesday, August 21, 2002 8:06 AM Subject: Re: [Zope-dev] Zope 2.4.3 and Python 2.2
On Wed, 21 Aug 2002 07:52:30 +0200 "Andreas Jung" <lists@andreas-jung.com> wrote:
Use Python 1.5.2 with Zope 2.4.X and Python 2.1.3 for Zope 2.5.X. Any other combination is *not* supported.
Why use Zope 2.4.X with Python 1.5.2 when i could find RPMs on zoep.org that requires Python 2.1.x ? And yes i know that this is not supported, but could there anything incompatible between Python 2.1 + Zope and Python 2.2 + Zope ?
Greets,
Because Zope 2.4.3 depends on Python 1.5.2 and will break with newer pythons (this has been experienced by others). Similarely if you use Zope 2.5.x, you need to use Python 2.1.3, because that python contains bugfixes that specifically affects Zope's stability. Zope 2.5.x and 2.4.x will not work with python 2.2x either, due to incompatibilities with python 2.2. Also, if you are using python 2.1.3, you probably want to install it from source, and configure it by passing the --without-pymalloc directive to the configure script. I cannot really remember why this is necessary, but I have some faint memory of some incompatibility between the newer optimised memory management thingie in python 2 and zope... or something like that :-) hth /dario - -------------------------------------------------------------------- Dario Lopez-Kästen, dario@ita.chalmers.se IT Systems & Services System Developer/System Administrator Chalmers University of Tech.
I wrote:
Because Zope 2.4.3 depends on Python 1.5.2 and will break with newer pythons (this has been experienced by others).
argh! Ignore this part - zope 2.4 requires 2.1, as Andreas pointed out. But if you use 2.1, be sure to use 2.1.3 or later since it fixes wierd stuff that affect Zope's stability. /dario
Dario Lopez-Kästen wrote:
Also, if you are using python 2.1.3, you probably want to install it from source, and configure it by passing the --without-pymalloc directive to the configure script.
Is this really still necessary? cheers, Chris
Andre Schubert wrote:
Hi there,
are there any known issues or problem running Zope 2.4.3 under PYthon 2.2 instead of 2.1. I'am asking because my sysadmin has setup a new linux-box with RH7.3. RH7.3 only has Python 2.2 installed and there are no RPMs compiled against Python 2.2. If there are no problems a would try to build a src.rpm for RH 7.3 + Python 2.2.
Zope 2.4.3 + Python 2.2 is likely to fail, but Zope 2.5.x + Python 2.2 is likely to work on Linux. It's just not officially supported. Zope 2.4.x, 2.5.x, and 2.6.x are designed for Python 2.1.3. Zope 2.7.x will clean up any remaining Python 2.2 compatibility issues. Shane
participants (8)
-
Andre Schubert -
Andre Schubert -
Andreas Jung -
Andreas Jung -
Chris Withers -
Dario Lopez-Kästen -
Lennart Regebro -
Shane Hathaway