Hopefully I will have a present related to this tomorrow.

rats... I got so close to getting this working too ;-) Chris

I just got back into my office and low and behold! Andy, you shouldn't have...but I'm glad you did. :) I'll test it out. I can't wait to see what Chris M. has up his sleeve. --- Andy McKay <andym@ActiveState.com> wrote:

Here we go.... maybe

How to:

get Python 1.5.2 source and build it. get Zope source put ext15.py somewhere in your path

then call

d:\Python-1.5.2\python d:\Zope-2.3.0-src\ext15.py -p d:\Python-1.5.2

you need to specify the source of your python and you may need to move a few files within python to get it looking at the right files.

totally untested pyd but Visual Studio 6.0 didnt complain

HTH -- Andy McKay.

----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: <zope-dev@zope.org> Sent: Thursday, March 22, 2001 1:36 PM Subject: [Zope-dev] What does DC use to compile Splitter.c on Windows?

...

Can someone from DC tell me what they use to come up with the binary version of the Splitter on Windoze. I am trying to get the Catalog to recognize "C++" on Win32. I have posted the Splitter.c file to my home page http://www.zope.org/Members/jspisak/Splitter

Can anyone give me a clue as to how to make a working Splitter.pyd out of this file on Windoze.

Thanks in advance!

Jason Spisak

__________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists -

http://lists.zope.org/mailman/listinfo/zope-announce

...

http://lists.zope.org/mailman/listinfo/zope )

ATTACHMENT part 2 application/octet-stream name=Splitter.pyd

ATTACHMENT part 3 application/octet-stream name=Splitter.def

ATTACHMENT part 4 application/octet-stream name=Splitter.mak

ATTACHMENT part 5 application/octet-stream name=Splitter.c

'''Build t Python extension using Visual C++ 40

This script generates and runs a series of .mak and .def files for extensions defined in a Setup file.

Note that you must have set up your environment to run VC command-line ustilities. This can be done by running the vcvar32.bat file in the VC++ bin directory.

Usage: python ext.py [options]

Options:

-r Run nmake to build release version -d Run nmake to build debug version -c If used with -r or -d, runs nmake on clean target. -p Specify location of Python source tree. Default is ..\.. (assuming you are in Extensions/some_name)

The script reads a file named "Setup" in the current directory. The Setup file has lines that describe the contents of an extension. Here\'s an example:

ExtensionClass ExtensionClass.c Acquisition Acquisition.c

Note that I\'ve intented for readability. The Setup file shouldn\'t be indented. Basically, the first token on the line is the module name, and the second token on the line is the sorce file. Additional source files and include directories may be included as well, as in:

pyexpat pyexpat.c -DXML_NS -Iexpat/xmlparse -Iexpat/xmltok expat/xmlparse/xmlparse.c expat/xmlparse/hashtable.c expat/xmltok/xmlrole.c expat/xmltok/xmltok.c

''' # '

import sys, getopt, os, string, regex

def die(m): print m print print __doc__ sys.exit(1)

def setup():

poptlist,pargs=getopt.getopt(sys.argv[1:],'p:drcI:o:h')

if opt(poptlist,'h'): print __doc__ if poptlist==[('-h','')]: sys.exit(0)

pargs and die('Unrecognized arguments: %s', string.join(args))

ext_regex = regex.compile('\([a-z][a-z0-9_]*\)[ \t]'

'\([.a-z][./a-z0-9_]*[.]c\)[ \t\n]', regex.casefold)

for line in open('Setup').readlines():

if ext_regex.match(line) >= 0: sargs=string.split(line) module=sargs[0] src=sargs[1] if src[:2]=='./': continue soptlist, sargs = getopt.getopt(sargs[2:],'I:D:')

filter(lambda a: a[:1]=='-' or string.find(a,'.') < 0, sargs) and die('Invalid arguments in Setup file: %s' % string.join(sargs))

sargs=map(lambda a: string.replace(a, '/','\\'), sargs) simple(module,poptlist+soptlist, sargs)

main=setup

def filebase(o, splitext=os.path.splitext, split=os.path.split): return splitext(split(o)[1])[0]

def simple(module,optlist,others): tdef,tmak=templates()

pyhome=opt(optlist,'p') pyhome=pyhome and pyhome[0] or '..\\..' cfg=opt(optlist,'d') and 'Debug' or 'Release' parms={'module': module, 'pyhome':pyhome, 'cfg': cfg} parms['includes']=string.join( map(lambda i: '/I "%s"' % i, opt(optlist,'I')) + map(lambda i: '/D "%s"' % i, opt(optlist,'D')) , ' ') parms['other_clean_release']=string.join( map(lambda o: '\n\t-@erase ".\\Release\\%s.obj"' % filebase(o), others),'') parms['other_clean_debug']=string.join( map(lambda o: '\n\t-@erase ".\\Debug\\%s.obj"' % filebase(o), others),'') parms['other_rule']=string.join( map(lambda o: '"$(INTDIR)\%s.obj" : .\%s $(DEP_CPP_MOD) "$(INTDIR)"\n' '\t$(CPP) $(CPP_PROJ) .\%s ' % (filebase(o), o, o), others),'\n') parms['other_link']=string.join( map(lambda o: '\n\t"$(INTDIR)\%s.obj" \\' % filebase(o), others),'')

open(module+'.def','w').write(tdef % parms) open(module+'.mak','w').write(tmak % parms) cfg_=' CFG="%s - Win32 %s"' % (module,cfg) os.system('nmake /nologo /f %s.mak%s' % (module,cfg_)) os.system('copy %s\%s.dll %s.pyd' % (cfg,module,module)) if opt(optlist,'c'): os.system("nmake /f %s.mak%s CLEAN" % (module,cfg_))

def opt(optlist,name): l=filter(lambda t, name='-'+name: t[0]==name, optlist) return map(lambda t: t[1], l)

def templates(): tdef = '''EXPORTS init%(module)s '''

tmak = '''# Microsoft Developer Studio Generated NMAKE File, Format Version 4.00 # ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102

!IF "$(CFG)" == "" CFG=%(module)s - Win32 Debug !MESSAGE No configuration specified. Defaulting to %(module)s - Win32 Debug. !ENDIF

!IF "$(CFG)" != "%(module)s - Win32 Release" && "$(CFG)" !=\\ "%(module)s - Win32 Debug" !MESSAGE Invalid configuration "$(CFG)" specified. !MESSAGE You can specify a configuration when running NMAKE on this makefile !MESSAGE by defining the macro CFG on the command line. For example: !MESSAGE !MESSAGE NMAKE /f "%(module)s.mak" CFG="%(module)s - Win32 Debug" !MESSAGE !MESSAGE Possible choices for configuration are: !MESSAGE !MESSAGE "%(module)s - Win32 Release" (based on\\ "Win32 (x86) Dynamic-Link Library") !MESSAGE "%(module)s - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") !MESSAGE !ERROR An invalid configuration is specified. !ENDIF

!IF "$(OS)" == "Windows_NT"

=== message truncated === __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

Very sorry about the multiple emails. Yahoomail gave me no indication that they were actually being sent. Sorry to all. Thanks again Andy, Jason Spisak --- Andy McKay <andym@ActiveState.com> wrote:

No problem... hope it works. -- Andy McKay.

----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: "Andy McKay" <andym@activestate.com> Cc: <zope-dev@zope.org> Sent: Thursday, March 22, 2001 3:43 PM Subject: Re: [Zope-dev] What does DC use to compile Splitter.c on Windows?

...

I just got back into my office and low and behold!

Andy, you shouldn't have...but I'm glad you did. :) I'll test it out.

I can't wait to see what Chris M. has up his sleeve.

--- Andy McKay <andym@ActiveState.com> wrote:

...

Here we go.... maybe

How to:

get Python 1.5.2 source and build it. get Zope source put ext15.py somewhere in your path

then call

d:\Python-1.5.2\python d:\Zope-2.3.0-src\ext15.py -p d:\Python-1.5.2

you need to specify the source of your python and you may need to move a few files within python to get it looking at the right files.

totally untested pyd but Visual Studio 6.0 didnt complain

HTH -- Andy McKay.

----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: <zope-dev@zope.org> Sent: Thursday, March 22, 2001 1:36 PM Subject: [Zope-dev] What does DC use to compile Splitter.c on Windows?

...

Can someone from DC tell me what they use to come up with the binary version of the Splitter on Windoze. I am trying to get the Catalog to recognize "C++" on Win32. I have posted the Splitter.c file to my home page http://www.zope.org/Members/jspisak/Splitter

Can anyone give me a clue as to how to make a working Splitter.pyd out of this file on Windoze.

Thanks in advance!

Jason Spisak

---

...

...

...

Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

---

...

...

...

Zope-Dev maillist - Zope-Dev@zope.org

http://lists.zope.org/mailman/listinfo/zope-dev

...

** No cross posts or HTML encoding! ** (Related lists -

http://lists.zope.org/mailman/listinfo/zope-announce

...

...

http://lists.zope.org/mailman/listinfo/zope )

...

ATTACHMENT part 2 application/octet-stream name=Splitter.pyd

...

ATTACHMENT part 3 application/octet-stream name=Splitter.def

...

ATTACHMENT part 4 application/octet-stream name=Splitter.mak

...

ATTACHMENT part 5 application/octet-stream name=Splitter.c

'''Build t Python extension using Visual C++ 40

This script generates and runs a series of .mak and .def files for extensions defined in a Setup file.

Note that you must have set up your environment to run VC command-line ustilities. This can be done by running the vcvar32.bat file in the VC++ bin directory.

Usage: python ext.py [options]

Options:

-r Run nmake to build release version -d Run nmake to build debug version -c If used with -r or -d, runs nmake on clean target. -p Specify location of Python source tree. Default is ..\.. (assuming you are in Extensions/some_name)

The script reads a file named "Setup" in the current directory. The Setup file has lines that describe the contents of an extension. Here\'s an example:

ExtensionClass ExtensionClass.c Acquisition Acquisition.c

Note that I\'ve intented for readability. The Setup file shouldn\'t be indented. Basically, the first token on the line is the module name, and the second token on the line is the sorce file. Additional source files and include directories may be included as well, as in:

pyexpat pyexpat.c -DXML_NS -Iexpat/xmlparse -Iexpat/xmltok expat/xmlparse/xmlparse.c expat/xmlparse/hashtable.c expat/xmltok/xmlrole.c expat/xmltok/xmltok.c

''' # '

import sys, getopt, os, string, regex

def die(m): print m print print __doc__ sys.exit(1)

def setup():

poptlist,pargs=getopt.getopt(sys.argv[1:],'p:drcI:o:h')

...

...

if opt(poptlist,'h'): print __doc__ if poptlist==[('-h','')]: sys.exit(0)

pargs and die('Unrecognized arguments: %s', string.join(args))

=== message truncated === __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

If this already posted, I'm sorry. I'm useing this damn yahoo mail until I get my servers up and running. I just got back into my office and low and behold! Andy, you shouldn't have...but I'm glad you did. :) I'll test it out. I can't wait to see what Chris has up his sleeve. --- Andy McKay <andym@ActiveState.com> wrote:

Here we go.... maybe

How to:

get Python 1.5.2 source and build it. get Zope source put ext15.py somewhere in your path

then call

d:\Python-1.5.2\python d:\Zope-2.3.0-src\ext15.py -p d:\Python-1.5.2

you need to specify the source of your python and you may need to move a few files within python to get it looking at the right files.

totally untested pyd but Visual Studio 6.0 didnt complain

HTH -- Andy McKay.

----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: <zope-dev@zope.org> Sent: Thursday, March 22, 2001 1:36 PM Subject: [Zope-dev] What does DC use to compile Splitter.c on Windows?

...

Can someone from DC tell me what they use to come up with the binary version of the Splitter on Windoze. I am trying to get the Catalog to recognize "C++" on Win32. I have posted the Splitter.c file to my home page http://www.zope.org/Members/jspisak/Splitter

Can anyone give me a clue as to how to make a working Splitter.pyd out of this file on Windoze.

Thanks in advance!

Jason Spisak

__________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists -

http://lists.zope.org/mailman/listinfo/zope-announce

...

http://lists.zope.org/mailman/listinfo/zope )

ATTACHMENT part 2 application/octet-stream name=Splitter.pyd

ATTACHMENT part 3 application/octet-stream name=Splitter.def

ATTACHMENT part 4 application/octet-stream name=Splitter.mak

ATTACHMENT part 5 application/octet-stream name=Splitter.c

'''Build t Python extension using Visual C++ 40

This script generates and runs a series of .mak and .def files for extensions defined in a Setup file.

Note that you must have set up your environment to run VC command-line ustilities. This can be done by running the vcvar32.bat file in the VC++ bin directory.

Usage: python ext.py [options]

Options:

-r Run nmake to build release version -d Run nmake to build debug version -c If used with -r or -d, runs nmake on clean target. -p Specify location of Python source tree. Default is ..\.. (assuming you are in Extensions/some_name)

The script reads a file named "Setup" in the current directory. The Setup file has lines that describe the contents of an extension. Here\'s an example:

ExtensionClass ExtensionClass.c Acquisition Acquisition.c

Note that I\'ve intented for readability. The Setup file shouldn\'t be indented. Basically, the first token on the line is the module name, and the second token on the line is the sorce file. Additional source files and include directories may be included as well, as in:

pyexpat pyexpat.c -DXML_NS -Iexpat/xmlparse -Iexpat/xmltok expat/xmlparse/xmlparse.c expat/xmlparse/hashtable.c expat/xmltok/xmlrole.c expat/xmltok/xmltok.c

''' # '

import sys, getopt, os, string, regex

def die(m): print m print print __doc__ sys.exit(1)

def setup():

poptlist,pargs=getopt.getopt(sys.argv[1:],'p:drcI:o:h')

if opt(poptlist,'h'): print __doc__ if poptlist==[('-h','')]: sys.exit(0)

pargs and die('Unrecognized arguments: %s', string.join(args))

ext_regex = regex.compile('\([a-z][a-z0-9_]*\)[ \t]'

'\([.a-z][./a-z0-9_]*[.]c\)[ \t\n]', regex.casefold)

for line in open('Setup').readlines():

if ext_regex.match(line) >= 0: sargs=string.split(line) module=sargs[0] src=sargs[1] if src[:2]=='./': continue soptlist, sargs = getopt.getopt(sargs[2:],'I:D:')

filter(lambda a: a[:1]=='-' or string.find(a,'.') < 0, sargs) and die('Invalid arguments in Setup file: %s' % string.join(sargs))

sargs=map(lambda a: string.replace(a, '/','\\'), sargs) simple(module,poptlist+soptlist, sargs)

main=setup

def filebase(o, splitext=os.path.splitext, split=os.path.split): return splitext(split(o)[1])[0]

def simple(module,optlist,others): tdef,tmak=templates()

pyhome=opt(optlist,'p') pyhome=pyhome and pyhome[0] or '..\\..' cfg=opt(optlist,'d') and 'Debug' or 'Release' parms={'module': module, 'pyhome':pyhome, 'cfg': cfg} parms['includes']=string.join( map(lambda i: '/I "%s"' % i, opt(optlist,'I')) + map(lambda i: '/D "%s"' % i, opt(optlist,'D')) , ' ') parms['other_clean_release']=string.join( map(lambda o: '\n\t-@erase ".\\Release\\%s.obj"' % filebase(o), others),'') parms['other_clean_debug']=string.join( map(lambda o: '\n\t-@erase ".\\Debug\\%s.obj"' % filebase(o), others),'') parms['other_rule']=string.join( map(lambda o: '"$(INTDIR)\%s.obj" : .\%s $(DEP_CPP_MOD) "$(INTDIR)"\n' '\t$(CPP) $(CPP_PROJ) .\%s ' % (filebase(o), o, o), others),'\n') parms['other_link']=string.join( map(lambda o: '\n\t"$(INTDIR)\%s.obj" \\' % filebase(o), others),'')

open(module+'.def','w').write(tdef % parms) open(module+'.mak','w').write(tmak % parms) cfg_=' CFG="%s - Win32 %s"' % (module,cfg) os.system('nmake /nologo /f %s.mak%s' % (module,cfg_)) os.system('copy %s\%s.dll %s.pyd' % (cfg,module,module)) if opt(optlist,'c'): os.system("nmake /f %s.mak%s CLEAN" % (module,cfg_))

def opt(optlist,name): l=filter(lambda t, name='-'+name: t[0]==name, optlist) return map(lambda t: t[1], l)

def templates(): tdef = '''EXPORTS init%(module)s '''

tmak = '''# Microsoft Developer Studio Generated NMAKE File, Format Version 4.00 # ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102

!IF "$(CFG)" == "" CFG=%(module)s - Win32 Debug !MESSAGE No configuration specified. Defaulting to %(module)s - Win32 Debug. !ENDIF

!IF "$(CFG)" != "%(module)s - Win32 Release" && "$(CFG)" !=\\ "%(module)s - Win32 Debug" !MESSAGE Invalid configuration "$(CFG)" specified. !MESSAGE You can specify a configuration when running NMAKE on this makefile !MESSAGE by defining the macro CFG on the command line. For example: !MESSAGE !MESSAGE NMAKE /f "%(module)s.mak" CFG="%(module)s - Win32 Debug" !MESSAGE !MESSAGE Possible choices for configuration are: !MESSAGE !MESSAGE "%(module)s - Win32 Release" (based on\\ "Win32 (x86) Dynamic-Link Library") !MESSAGE "%(module)s - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") !MESSAGE !ERROR An invalid configuration is specified. !ENDIF

!IF "$(OS)" == "Windows_NT"

=== message truncated === __________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

Hey no problem, glad it works. Thanks to Brian for sending me all that stuff a while ago... -- Andy McKay. ----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: "Andy McKay" <andym@activestate.com>; <zope-dev@zope.org> Cc: "Chris McDonough" <chrism@digicool.com> Sent: Thursday, March 22, 2001 3:57 PM Subject: [Zope-dev] It worked! [Andy rocks]

You are terrific Andy. Thanks a ton. I've been busting my ass with cygwin and all kinds of Windoze junk. What a nightmare.

I hope you find good use for the hack.

All my best,

Jason Spisak --- Andy McKay <andym@ActiveState.com> wrote:

...

Here we go.... maybe

How to:

get Python 1.5.2 source and build it. get Zope source put ext15.py somewhere in your path

then call

d:\Python-1.5.2\python d:\Zope-2.3.0-src\ext15.py -p d:\Python-1.5.2

you need to specify the source of your python and you may need to move a few files within python to get it looking at the right files.

totally untested pyd but Visual Studio 6.0 didnt complain

HTH -- Andy McKay.

----- Original Message ----- From: "resefficient..." <resefficient@yahoo.com> To: <zope-dev@zope.org> Sent: Thursday, March 22, 2001 1:36 PM Subject: [Zope-dev] What does DC use to compile Splitter.c on Windows?

...

Can someone from DC tell me what they use to come up with the binary version of the Splitter on Windoze. I am trying to get the Catalog to recognize "C++" on Win32. I have posted the Splitter.c file to my home page http://www.zope.org/Members/jspisak/Splitter

Can anyone give me a clue as to how to make a working Splitter.pyd out of this file on Windoze.

Thanks in advance!

Jason Spisak

__________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists -

http://lists.zope.org/mailman/listinfo/zope-announce

...

http://lists.zope.org/mailman/listinfo/zope )

...

ATTACHMENT part 2 application/octet-stream name=Splitter.pyd

...

ATTACHMENT part 3 application/octet-stream name=Splitter.def

...

ATTACHMENT part 4 application/octet-stream name=Splitter.mak

...

ATTACHMENT part 5 application/octet-stream name=Splitter.c

'''Build t Python extension using Visual C++ 40

This script generates and runs a series of .mak and .def files for extensions defined in a Setup file.

Note that you must have set up your environment to run VC command-line ustilities. This can be done by running the vcvar32.bat file in the VC++ bin directory.

Usage: python ext.py [options]

Options:

-r Run nmake to build release version -d Run nmake to build debug version -c If used with -r or -d, runs nmake on clean target. -p Specify location of Python source tree. Default is ..\.. (assuming you are in Extensions/some_name)

The script reads a file named "Setup" in the current directory. The Setup file has lines that describe the contents of an extension. Here\'s an example:

ExtensionClass ExtensionClass.c Acquisition Acquisition.c

Note that I\'ve intented for readability. The Setup file shouldn\'t be indented. Basically, the first token on the line is the module name, and the second token on the line is the sorce file. Additional source files and include directories may be included as well, as in:

pyexpat pyexpat.c -DXML_NS -Iexpat/xmlparse -Iexpat/xmltok expat/xmlparse/xmlparse.c expat/xmlparse/hashtable.c expat/xmltok/xmlrole.c expat/xmltok/xmltok.c

''' # '

import sys, getopt, os, string, regex

def die(m): print m print print __doc__ sys.exit(1)

def setup():

poptlist,pargs=getopt.getopt(sys.argv[1:],'p:drcI:o:h')

...

if opt(poptlist,'h'): print __doc__ if poptlist==[('-h','')]: sys.exit(0)

pargs and die('Unrecognized arguments: %s', string.join(args))

ext_regex = regex.compile('\([a-z][a-z0-9_]*\)[ \t]'

'\([.a-z][./a-z0-9_]*[.]c\)[ \t\n]', regex.casefold)

for line in open('Setup').readlines():

if ext_regex.match(line) >= 0: sargs=string.split(line) module=sargs[0] src=sargs[1] if src[:2]=='./': continue soptlist, sargs = getopt.getopt(sargs[2:],'I:D:')

filter(lambda a: a[:1]=='-' or string.find(a,'.') < 0, sargs) and die('Invalid arguments in Setup file: %s' % string.join(sargs))

sargs=map(lambda a: string.replace(a, '/','\\'), sargs) simple(module,poptlist+soptlist, sargs)

main=setup

def filebase(o, splitext=os.path.splitext, split=os.path.split): return splitext(split(o)[1])[0]

def simple(module,optlist,others): tdef,tmak=templates()

pyhome=opt(optlist,'p') pyhome=pyhome and pyhome[0] or '..\\..' cfg=opt(optlist,'d') and 'Debug' or 'Release' parms={'module': module, 'pyhome':pyhome, 'cfg': cfg} parms['includes']=string.join( map(lambda i: '/I "%s"' % i, opt(optlist,'I')) + map(lambda i: '/D "%s"' % i, opt(optlist,'D')) , ' ') parms['other_clean_release']=string.join( map(lambda o: '\n\t-@erase ".\\Release\\%s.obj"' % filebase(o), others),'') parms['other_clean_debug']=string.join( map(lambda o: '\n\t-@erase ".\\Debug\\%s.obj"' % filebase(o), others),'') parms['other_rule']=string.join( map(lambda o: '"$(INTDIR)\%s.obj" : .\%s $(DEP_CPP_MOD) "$(INTDIR)"\n' '\t$(CPP) $(CPP_PROJ) .\%s ' % (filebase(o), o, o), others),'\n') parms['other_link']=string.join( map(lambda o: '\n\t"$(INTDIR)\%s.obj" \\' % filebase(o), others),'')

open(module+'.def','w').write(tdef % parms) open(module+'.mak','w').write(tmak % parms) cfg_=' CFG="%s - Win32 %s"' % (module,cfg) os.system('nmake /nologo /f %s.mak%s' % (module,cfg_)) os.system('copy %s\%s.dll %s.pyd' % (cfg,module,module)) if opt(optlist,'c'): os.system("nmake /f %s.mak%s CLEAN" % (module,cfg_))

def opt(optlist,name): l=filter(lambda t, name='-'+name: t[0]==name, optlist) return map(lambda t: t[1], l)

def templates(): tdef = '''EXPORTS init%(module)s '''

tmak = '''# Microsoft Developer Studio Generated NMAKE File, Format Version 4.00 # ** DO NOT EDIT **

# TARGTYPE "Win32 (x86) Dynamic-Link Library" 0x0102

!IF "$(CFG)" == "" CFG=%(module)s - Win32 Debug !MESSAGE No configuration specified. Defaulting to %(module)s - Win32 Debug. !ENDIF

!IF "$(CFG)" != "%(module)s - Win32 Release" && "$(CFG)" !=\\ "%(module)s - Win32 Debug" !MESSAGE Invalid configuration "$(CFG)" specified. !MESSAGE You can specify a configuration when running NMAKE on this makefile !MESSAGE by defining the macro CFG on the command line. For example: !MESSAGE !MESSAGE NMAKE /f "%(module)s.mak" CFG="%(module)s - Win32 Debug" !MESSAGE !MESSAGE Possible choices for configuration are: !MESSAGE !MESSAGE "%(module)s - Win32 Release" (based on\\ "Win32 (x86) Dynamic-Link Library") !MESSAGE "%(module)s - Win32 Debug" (based on "Win32 (x86) Dynamic-Link Library") !MESSAGE !ERROR An invalid configuration is specified. !ENDIF

!IF "$(OS)" == "Windows_NT"

=== message truncated ===

__________________________________________________ Do You Yahoo!? Get email at your own domain with Yahoo! Mail. http://personal.mail.yahoo.com/

_______________________________________________ Zope-Dev maillist - Zope-Dev@zope.org http://lists.zope.org/mailman/listinfo/zope-dev ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope )