[Zope] MySQLdb-0.9.0 and ZMySQLDA-2.0.7 nogo with 2.4a1?

[Andy Dustman]

I now have a ZMySQLDA-2.0.8a1 which does work with Zope 2.4.0a1. I had to
add a new-style initialization (i.e. initialize in __init__.py) and that
took care of it. I also have some help in there as well. So, if you are
really hot to try it, write me off-list, and I'll mail it to you. Don't
bother unless you are using 2.4.0a1: The help alone is not worth much
unless you are really clueless. There are no issues with Zope 2.3.x that
I'm aware of.

Chris McDonough said in another thread (about the Gadfly problem, which is
probably the same problem) that he didn't see this happening in the
current trunk, so this is probably fixed already, i.e. maybe the old-style
initialization is broken in 2.4.0a1.

On 10 Jun 2001, Frank Tegtmeyer wrote:

> Tony McDonald <tony.mcdonald@ncl.ac.uk> writes:
>
> > On 4/6/01 7:21 pm, "Andy Dustman" <andy@dustman.net> wrote:
> > > I didn't write the words which appear below me.
> > I've got a python2.1 installation with 2.4.0a1 Zope. I've installed
> > MySQLdb-0.9.0 and tested it alongside python2.1. This is under Solaris.
>
> The same here on a Linux system.
>
> > Anyone know what I'm doing wrong here?
>
> Nothing possibly. Because the same was reported for Gadfly I assume a
> problem in this Zope alpha version.

-- 
Andy Dustman         PGP: 0xC72F3F1D
    @       .net     http://dustman.net/andy
"I'd rather listen to Newton than to Mundie. He may have been dead for almost
three hundred years, but despite that he stinks up the room less." -- Linus T.