[Zope] Changing a Zope environment variable?

Thu, 18 Jul 2002 11:26:47 +1000

Good point, will let you know how I go :)

-----Original Message-----
From: zope-admin@zope.org [mailto:zope-admin@zope.org]On Behalf Of Chris
McDonough
Sent: Thursday, 18 July 2002 11:17 AM
To: Michael Fox; Jerome Alet
Cc: zope@zope.org
Subject: Re: [Zope] Changing a Zope environment variable?

You might try restarting Windows after adding the system variable to
make sure it "takes".

----- Original Message -----
From: "Michael Fox" <Michael@CenturySoftware.com.au>
To: "Chris McDonough" <chrism@zope.com>; "Jerome Alet"
<alet@librelogiciel.com>
Cc: <zope@zope.org>
Sent: Wednesday, July 17, 2002 9:13 PM
Subject: RE: [Zope] Changing a Zope environment variable?

Thanks Jerome/Chris,

Adding a new Windows System Variable, and restarting the Zope service,
didn't seem to do the trick...

But, modifying start.bat to look like this -

"E:\Zope\Zope-2.5.1\bin\python.exe" "E:\Zope\Zope-2.5.1\z2.py" -w 80
ZSESSION_TIMEOUT_MINS=3D180 -D %1 %2 %3 %4 %5 %6 %7 %8 %9

Works great. The entry in z2.py (ZSESSION_TIMEOUT_MINS=3D180) is not
required.

But I still have the problem of wanting Zope to run as a winnt service
=3D\

Michael

-----Original Message-----
From: zope-admin@zope.org [mailto:zope-admin@zope.org]On Behalf Of
Chris
McDonough
Sent: Thursday, 18 July 2002 10:53 AM
To: Michael Fox; Jerome Alet
Cc: zope@zope.org
Subject: Re: [Zope] Changing a Zope environment variable?

You've successfully created a Python variable but you haven't set an
environment variable. ;-)

In Windows NT/2000/XP, I believe the incantation for setting
environment variables is either:

  - Use the Settings -> Control Panel -> System -> Advanced ->
Environment Variables tab
    and set a "system variable" by clicking "New"

   or

  - In your Zope's START.BAT file, insert on a line above any of the
others:

    set ZSESSION_TIMEOUT_MINS=3D20

HTH,

- C

----- Original Message -----
From: "Michael Fox" <Michael@CenturySoftware.com.au>
To: "Jerome Alet" <alet@librelogiciel.com>
Cc: <zope@zope.org>
Sent: Wednesday, July 17, 2002 8:45 PM
Subject: RE: [Zope] Changing a Zope environment variable?

Thanks Jerome,

My Zope server is running on a Windows platform. After adding the
following entry in z2.py (assuming this is the right place to do
so)...

ZSESSION_TIMEOUT_MINS=3D180

And restarting the Zope WinNT service, the Transient Object
Container's
timeout value is still set to 20 mins?!

Michael

-----Original Message-----
From: zope-admin@zope.org [mailto:zope-admin@zope.org]On Behalf Of
Jerome Alet
Sent: Thursday, 18 July 2002 10:21 AM
To: Michael Fox
Cc: zope@zope.org
Subject: Re: [Zope] Changing a Zope environment variable?

On Thu, Jul 18, 2002 at 10:04:02AM +1000, Michael Fox wrote:
> how/where do I modify the value of a Zope enviroment variable?

in Zope's startup script. (/etc/init.d/zope with my Debian)

the ZShell software available from
http://www.librelogiciel.com/software/
also allows you to modify them while running, but possible collateral
damage of such an action remains to be investigated (anyway it works).

hth.

Jerome Alet

_______________________________________________
Zope maillist  -  Zope@zope.org
http://lists.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists -
 http://lists.zope.org/mailman/listinfo/zope-announce
 http://lists.zope.org/mailman/listinfo/zope-dev )

_______________________________________________
Zope maillist  -  Zope@zope.org
http://lists.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists -=20
 http://lists.zope.org/mailman/listinfo/zope-announce
 http://lists.zope.org/mailman/listinfo/zope-dev )