[Zope] zope freezes/halts after loading initial page

[Tim Zegir]

I'm sorry if someone has already suggested this but I have a RH9 system
too and I had the same problem. The way I fixed it was by using the
RPM's found at http://zope.org/Members/medienlabor/packages.
After I install this (it uses the systems python by default) it has run
stable for about 2 1/2 months now. It has not been turned off or gone
down once.

Tim

-----Original Message-----
From: zope-bounces at zope.org [mailto:zope-bounces at zope.org] On Behalf Of
Lee J. McAllister
Sent: Thursday, 11 December 2003 9:12 AM
To: gjost at janm.org; zope at zope.org
Subject: RE: [Zope] zope freezes/halts after loading initial page

Most likely culprit on an RH9 system then is that you're running the 
original RH9 glibc library.

There is a problem with the glibc version released with RH9 that can
cause 
siimilar behaviour, I found that updating the glibc and recompiling zope
and 
python fixed it on my system.

If your glibc is not current you should update it, there are several 
mentions of the glibc problem and fix in the list's archives if you need

more details.

Lee

>
>Same thing happens when i try it directly from the server.
>
> > If I remember correctly doesn't the wo_pcgi stand for "without
PCGI"??
> > If so that may be why PCGI isn't firing up.
>
>Doh! of course you're right.  i don't need PCGI though, guess i was 
>grasping
>at straws.
>
>In case this helps understand the problem, here's what i've tried so
far:
>- Tried installing RPM (i'm using RedHat 9.0).  this didn't work bc my
>install has python 2.2.2.
>- Tried installing binary.  got this problem (server not responding).
>- Tried installing from source, with python-2.1.3 and zope-2.6.2.  put
zope
>in /usr/local/zope/Zope-[vernum,etc] and python-2.1.3 in
>/usr/local/zope/python-2.1.3
>- Was getting an "ImportError: No module named _socket" error.
Somebody on
>the mailman list had the same err, and they suggested to uncomment the
>"_socket socketmodule.c" line in Python-2.1.3/Modules/Setup and
recompile.
>The error hasn't reappeared.
>- Checked Zope-2.6.2-src/start to make sure the .../bin/python pointed
to
>the 2.1.3 install instead of the 2.2.2 one.
>- chowned the /usr/local/zope dir (and subdirs) to my user.
>
>Zope still loads the first page, and then becomes totally
nonresponsive.
>
>Thanks again for your help/advice.
>--geoff
>
>-----Original Message-----
>From: Lee J. McAllister [mailto:ljmcallister at hotmail.com]
>Sent: Wednesday, December 10, 2003 12:18 PM
>To: gjost at janm.org; zope at zope.org
>Subject: RE: [Zope] zope freezes/halts after loading initial page
>
>
>Have you tried doing direct access to your Zope Server via
>
>    http://127.0.0.1:8081
>
>If so what is the result?
>
> ># install zope 2.6.2
> > > cd /usr/local/zope
> > > wget http://zope.org/Products/Zope/2.6.2/Zope-2.6.2-src.tgz
> > > tar xzvf Zope-2.6.2-src.tgz
> > > cd Zope-2.6.2-src
> > > /usr/local/zope/python-2.1.3/bin/python wo_pcgi.py
>
>If I remember correctly doesn't the wo_pcgi stand for "without PCGI"??
If
>so that may be why PCGI isn't firing up.  If you're dead set on using
PCGI
>you should be able to rebuild the server to run with PCGI, but you're
>probably better off without it.  PCGI is alot slower than other options

>like
>VirtualHostMonster.
>
>Lee
>
>_________________________________________________________________
>Add photos to your messages with MSN 8. Get 2 months FREE*.
>http://join.msn.com/?page=dept/features&pgmarket=en-ca&RU=http%3a%2f%2f
join.
>msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca
>
>

_________________________________________________________________
Add photos to your e-mail with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/photos&pgmarket=en-ca&RU=http%3a%2f%2
fjoin.msn.com%2f%3fpage%3dmisc%2fspecialoffers%26pgmarket%3den-ca


_______________________________________________
Zope maillist  -  Zope at zope.org
http://mail.zope.org/mailman/listinfo/zope
**   No cross posts or HTML encoding!  **
(Related lists - 
 http://mail.zope.org/mailman/listinfo/zope-announce
 http://mail.zope.org/mailman/listinfo/zope-dev )