[Zope] Re: [Plone-users] Private Zope/Plone Site -
Insufficent_Privileges
Chuck Amadi
chuck at smtl.co.uk
Tue Jul 20 10:55:02 EDT 2004
Hi Chandrakantha
In the acl_users I created User " Author " and their global passswd and
gave them Owner and Manager Roles.
I want them to be able to create folders and edit the contents - but for
now it's only a pilot site So I will re-do the what and what they cannot
do once the requirements have been set. (Nothing for Now) but I want to
know beforehand (digest and understand) where and how I set these is the
doc's on the settings.
So when I'm brief I can exstablish the requirments .
Cheers
Chuck
On Tue, 2004-07-20 at 13:45, Chandrakantha Nagaraja wrote:
> Chuck Amadi wrote:
>
> >Yes - it's working fine except a bit concerned about
> >insufficient_privilleges .
> >
> >I as the external author was able to make amendments and view as a
> >Manager and Owner - but is there a properties to double check the
> >External authors privilleges .
> >
> >
> Please elaborate what External authors should be able to do and what is
> not happning now.
> I assume 'External authors' is a role in your case.
>
>
> -- cn
> =======================
> ZeOmega
> Southend road
> Bangalore, India
> Ph: 26632589
> http://www.zeomega.com
> ======================
>
>
> >Cheers
> >
> >Chuck
> >On Tue, 2004-07-20 at 11:51, Chandrakantha Nagaraja wrote:
> >
> >
> >>Hi Chuck,
> >> I am back to office :) thanks, hope you are doing well.
> >>
> >>-- cn
> >>=======================
> >>ZeOmega
> >>Southend road
> >>Bangalore, India
> >>Ph: 26632589
> >>http://www.zeomega.com
> >>======================
> >>
> >>
> >>Chuck Amadi wrote:
> >>
> >>
> >>
> >>>Cheers for checking
> >>>
> >>>Are you are of the or come across - insufficent_privileges prompt i am
> >>>stil able to access the contents and view tab etc as the External Author
> >>>will access to the pilot zope/plone site.
> >>>
> >>>Cheers
> >>>
> >>>Chuck
> >>>
> >>>
> >>>On Mon, 2004-07-19 at 07:23, Chandrakantha Nagaraja wrote:
> >>>
> >>>
> >>>
> >>>
> >>>>Hi chuck,
> >>>> It is really cool hearing 'It worked' from you :)
> >>>>zoobiotic.com is popping up for username and password :)
> >>>>
> >>>>-- cn
> >>>>=======================
> >>>>ZeOmega
> >>>>Southend road
> >>>>Bangalore, India
> >>>>Ph: 26632589
> >>>>http://www.zeomega.com
> >>>>======================
> >>>>
> >>>>
> >>>>Chuck Amadi wrote:
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>>Hi Chandrakantha Nagaraja
> >>>>>
> >>>>>Just to say thanks It worked as you said with the simpliar solution.
> >>>>>
> >>>>>Created a Group for external authors to contribute once I get the pilot
> >>>>>up and running as I only got a few bits and pieces ie.Company Logo and
> >>>>>Front page blurb.
> >>>>>
> >>>>>www.zoobiotic.com
> >>>>>
> >>>>>Cheers
> >>>>>
> >>>>>Chuck
> >>>>>
> >>>>>
> >>>>>On Thu, 2004-07-15 at 18:07, Chandrakantha Nagaraja wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>>Hi Chuck,
> >>>>>> Actually there are two solutions to your problem, one is playing
> >>>>>>with work flow as you are doing now and another solution is pretty
> >>>>>>simple and it should work for your case.
> >>>>>>If you have 'View' permission then only you can view any object so what
> >>>>>>I suggested was remove 'View' permission to 'Anonymous' role (go to root
> >>>>>>of your portal and click on Security tab, you will find roles there) and
> >>>>>>no Acquire (means you have to uncheck acquiring View permission to
> >>>>>>Anonymous role and assign to other roles that you trust), since View
> >>>>>>permission is removed to Anonymous role and it is not acquired, the site
> >>>>>>will not be able to accessed by anonymous user, only the users with View
> >>>>>>permission will be able to access the site. Hope this helps you.
> >>>>>>
> >>>>>>
> >>>>>>PS: Sorry, I won't be there in the office for a couple of days.
> >>>>>>
> >>>>>>-- cn
> >>>>>>=======================
> >>>>>>ZeOmega
> >>>>>>Southend road
> >>>>>>Bangalore, India
> >>>>>>Ph: 26632589
> >>>>>>http://www.zeomega.com
> >>>>>>======================
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>Chuck Amadi wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>Hi Chandrakantha Nagaraja
> >>>>>>>
> >>>>>>>Sorry to email you directly , I have setp up VHM and Apache rewrites to
> >>>>>>>my Zope/Plone site and trying to setup a Private Plone Site using the
> >>>>>>>Doc's from the Url you sent me/Mailing list.
> >>>>>>>
> >>>>>>>I have gone thtu the neccessary steps but I'm a bit confused at this
> >>>>>>>point below:
> >>>>>>>
> >>>>>>>portal_workflow
> >>>>>>>
> >>>>>>>Clicke on States tab
> >>>>>>>For each stated listed
> >>>>>>>
> >>>>>>>[ private ] Visible and editable only by owner
> >>>>>>>
> >>>>>>>publish (Reviewer publishes content)
> >>>>>>>show (Member makes content visible)
> >>>>>>>
> >>>>>>>
> >>>>>>>[ published ] Public
> >>>>>>>hide (Member makes content private)
> >>>>>>>retract (Member retracts submission)
> >>>>>>>
> >>>>>>>
> >>>>>>>[ * visible ] Visible but not published
> >>>>>>>hide (Member makes content private)
> >>>>>>>publish (Reviewer publishes content)
> >>>>>>>
> >>>>>>>Click on the state name (I clicked all three)
> >>>>>>>Click on Permissions tab
> >>>>>>>Change Anonymous checked areas to Authenticated and no Aquire at this
> >>>>>>>point there was no Anonymous to check .
> >>>>>>>
> >>>>>>>The Permissions tab had the following:
> >>>>>>>
> >>>>>>>Access contents information
> >>>>>>>
> >>>>>>>
> >>>>>>>[ List folder contents ]
> >>>>>>>
> >>>>>>>[ Modify portal content ]
> >>>>>>>
> >>>>>>>[ View ]
> >>>>>>>
> >>>>>>>Thus do I just check view and Remove Selected after I have checked all
> >>>>>>>the states or just Public as the doc's just say Click on state name not
> >>>>>>>names:
> >>>>>>>
> >>>>>>>As In the docs it says repeat this for all states .
> >>>>>>>
> >>>>>>>Cheers
> >>>>>>>
> >>>>>>>Chuck
> >>>>>>>
> >>>>>>>On Tue, 2004-07-13 at 13:21, Chandrakantha Nagaraja wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>Please also visit this link for more info.
> >>>>>>>>http://plone.org/documentation/howto/HowToCreateAPrivatePloneSite
> >>>>>>>>
> >>>>>>>>Hope that helps.
> >>>>>>>>
> >>>>>>>>-- cn
> >>>>>>>>=======================
> >>>>>>>>ZeOmega
> >>>>>>>>Southend road
> >>>>>>>>Bangalore, India
> >>>>>>>>Ph: 26632589
> >>>>>>>>http://www.zeomega.com
> >>>>>>>>======================
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>Chuck Amadi wrote:
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>Hi All at Zope/Plone Mailing list.
> >>>>>>>>>
> >>>>>>>>>I have installed Zope.2.7.0 , Plone 2 ,VHM ,CMF 1.4 and Apache 2 on our
> >>>>>>>>>new web server to be deployed on Linux o/s flavour - SuSE 8.2 Enterprise
> >>>>>>>>>Server.
> >>>>>>>>>
> >>>>>>>>>Currently deployed is Zope 2.6.2 ,Plone RC2,VHM, CMF 1.4 and Apache 1.3.
> >>>>>>>>>
> >>>>>>>>>Anyway I have got my Zope/Plone Site up on the New Server but my problem
> >>>>>>>>>is I need to deploy on the old and new web server a Plone Site in
> >>>>>>>>>development that must only be accessable and viewable using the issuing
> >>>>>>>>>user and password dteails only.
> >>>>>>>>>
> >>>>>>>>>I have done this similiar before for my previous employer for external
> >>>>>>>>>content authoring for zope manager's but this time the Plone site in
> >>>>>>>>>particular shouldn't be viewable to the public only a few editors and
> >>>>>>>>>myself while we work on the Plone site but I need external contributors
> >>>>>>>>>to make additions to the Plone site but not viewable to the general
> >>>>>>>>>public.
> >>>>>>>>>
> >>>>>>>>>Is at all possible for both versions to allow this if So please could
> >>>>>>>>>someone point me in the right direction.
> >>>>>>>>>
> >>>>>>>>>Cheers
> >>>>>>>>>
> >>>>>>>>>Chuck
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
--
Chuck Amadi, Systems Administrator, | http://www.smtl.co.uk/
Surgical Materials Testing Lab, | http://www.worldwidewounds.com/
Princess of Wales Hospital, S Wales | http://www.dressings.org/
Tel/Fax: +44 1656-752820 | chuck at smtl.co.uk
More information about the Zope
mailing list