[Zope] Question regarding changing Zope site to another distro

Jake jake at zopezone.com
Fri Apr 22 07:55:15 EDT 2005


Hi Mario,

This is my system for upgrading:
http://zopezone.com/faq/1063992383

I have moved my Zope installation more than a few times from server to
server and here are the basics.

- Get the new installation up and running first, just plain Zope/Plone/CMF
etc. You might want to start with a newer version as it is a good time to
upgrade but that is up to you, more work, bigger payout.

- Copy over the /Products/ (or the ones that you didn't already install)
and restart Zope. Check for errors.

- Copy over the Data.fs, repeat.

Finally, make sure to grab all the logs etc.

That is to go from a old zope version to a new one.

If you just want to transfer it, shut it down, zip it up and unzip it in
the same location. I have never found this to work very well though. You
will have to edit the config and start files to make sure they are
pointing at the new locations.

The other way to do it, would be to try the first method but use the exact
same versions. So, just install the same versions in a normal manner, and
copy over Products and Data.fs.

Good luck (this is why I try only to do it a few times a year).

Jake

-- 
http://www.ZopeZone.com


Mário Gamito said:
> Hi,
>
> I run this Zope/Plone site - www.dte.ua.pt
> I am no Zope guru. I've just managed, with my years on administrating
> Linux servers, to install it, as well as plone and a bunch of Products,
> and get it running. That's all.
> Just made after, a few hacks in Plone code, mainly to support
> authentication through HTTPS and a few more minor thingies.
>
> The server running Zope has been there for about three years (more or
> less), is running SuSE 9.0 and it was compiled as well as Pyhton.
>
> The latest versions of Zope and Python, were by that time 2.6.1 and
> 2.1.3 respectively.
>
> So, to live on the edge, i've instaled this versions under:
> /usr/local/zope
> and
> /usr/local/python
>
>
> I start zope with:
> /usr/local/zope/start &
>
> and in /usr/local/zope/start file, i have
> exec /usr/local/python/bin/python $cwd/z2.py -L 'pt_PT' -u zope "$@"
>
>
>
> I'm moving this machine to a more powerful one in which i'm going to
> install Red Hat Enterprise Linux 4.
>
> I remeber having installed it first in RedHat 9, and then switching it
> after a few days to SuSE 9.0, just by backing up /usr/local/zope
> directory and restoring it after in SuSE.
> No major issues with this.
> A couple of symbolic links did to tweaks that were needed.
>
>
> Now...
> I think my Zope is suffering from arthritis :(
> I can't undo any more, either in Zope nor Plone and i can't compress
> Zope's database without getting an error and... no database compressed.
> As if you care to rapidly browse the site, you will see it is indeed a
> small one, but the /usr/local/zope .bz2 tarball is already at 1 GB and
> increasing.
>
>
> Does this sympthoms means that i'm going to have troubles now migrating
> to RHEL 4 ?
> Maintaining the Zope and Python version of course and the same scheme.
> I don't want to upgrade Zope, nor Python, nor Plone.
>
> Any help would be apreciated.
>
> Warm Regards,
> --
> Mário Gamito
> Bastard Administrator in $hell
> $Users, you better make your backups
> Key FingerPrint: 0x90DA8E3C
> _______________________________________________
> Zope maillist  -  Zope at zope.org
> http://mail.zope.org/mailman/listinfo/zope
> **   No cross posts or HTML encoding!  **
> (Related lists -
>  http://mail.zope.org/mailman/listinfo/zope-announce
>  http://mail.zope.org/mailman/listinfo/zope-dev )
>




More information about the Zope mailing list