[Zope] Zope installation woes

[Jonathan]

At the o/s command prompt, type:  ps -eLf

You should see a listing which contains some zope/python entries if zope is 
running.

If zope is not running try starting zope with the command: ./zopectl fg
this should allow you to see any errors that are generated while zope tries 
to start up.


hth

Jonathan

----- Original Message ----- 
From: "russ" <russ at russtik.co.uk>
To: <jake at zopezone.com>; <zope at zope.org>
Sent: Wednesday, July 05, 2006 11:05 AM
Subject: RE: [Zope] Zope installation woes


> Hi Jake,
>
> Firstly I'll just mention a little bit more about the server.  We have
> cPanel and Apache running.  There's a number of accounts setup in cPanel 
> and
> I've tried to access Zope via one of these urls (www.domain.tld:8080) but 
> to
> no avail.  I've also tried the IP of the server with no luck.  I don't 
> know
> what else to try now, as I mentioned before I'm completely new to all of
> this stuff so it's quite a steep learning curve.  I also don't know what 
> you
> mean by "use top" :S
>
> Thanks for your reply BTW.
>
> R.
>
> -----Original Message-----
> From: Jake [mailto:jake at zopezone.com]
> Sent: 05 July 2006 15:56
> To: russ
> Cc: zope at zope.org
> Subject: Re: [Zope] Zope installation woes
>
> It looks like it is already running. Use top and look for a process called
> "python".
>
> Did you try the url in a browser on port 8080?
>
> Jake
> _______________________
> http://www.ZopeZone.com
>
>
> On Wed, July 5, 2006 10:31 am, russ said:
>> Hello Zopesters,
>>
>> Firstly, I must say that I'm completely new to this as I usually develop
>> front-end stuff, so excuse my ignorance.  Right... that's out of the 
>> way -
>> I
>> have been trying to install Zope on a server I have access to via SSH.
>> I've
>> followed the instructions for installing it from source found here:
>>
>> http://plone.org/documentation/how-to/setup-from-source
>>
>> I've got as far as making an instance and then attempting to start Zope.
>> First of all I got this:
>>
>> root at server [~]# /usr/local/zope/instance3/bin/runzope
>> /usr/local/zope/zope2.9.3/lib/python/ZServer/utils.py:33:
>> DeprecationWarning: The zLOG package is deprecated and will be removed in
>> Zope 2.11. Use the Python logging module instead.
>> LOG('ZServer', severity[type], message)
>> /usr/local/zope/zope2.9.3/lib/python/Signals/SignalHandler.py:39:
>> DeprecationWarning: The zLOG package is deprecated and will be removed in
>> Zope 2.11. Use the Python logging module instead.
>> zLOG.LOG('Z2', zLOG.BLATHER, "Installed sighandler for %s" % (
>>
>>
>> ...and then nothing :-|  I tried running it again & got the following:
>>
>> <snipped output>
>> ZConfig.ConfigurationError: There was a problem starting a server of type
>> "HTTPS erver". This may mean that your user does not have permission to
>> bind
>> to the por t which the server is trying to use or the port may already be
>> in
>> use by another application. (Address already in use)
>>
>> The log file reports it's running, yet I cannot seem to access the start
>> page from http://myserverip:8080.
>>
>> I don't know what to do next?  Can anyone please help me out?
>>
>> :(
>>
>> R.
>>
>> _______________________________________________
>> Zope maillist  -  Zope at zope.org
>> http://mail.zope.org/mailman/listinfo/zope
>> **   No cross posts or HTML encoding!  **
>> (Related lists -
>>  http://mail.zope.org/mailman/listinfo/zope-announce
>>  http://mail.zope.org/mailman/listinfo/zope-dev )
>>
>
>
>
> _______________________________________________
> Zope maillist  -  Zope at zope.org
> http://mail.zope.org/mailman/listinfo/zope
> **   No cross posts or HTML encoding!  **
> (Related lists -
> http://mail.zope.org/mailman/listinfo/zope-announce
> http://mail.zope.org/mailman/listinfo/zope-dev )
>