[Zope] ZEO Problem

[beno]

I got this working by changing the following in zope.conf:
    server localhost:7080
to
    server 202.71.106.119:9999
Apparently, it needs its own port?
TIA,
beno


Jonathan wrote:
>
> ----- Original Message ----- From: "beno" <zope at 2012.vi>
> To: <zope at zope.org>
> Sent: Saturday, September 02, 2006 9:24 AM
> Subject: [Zope] ZEO Problem
>
>
>> Hi;
>> I'm reading the Plone book. It states that for Zope 2.7 (I have 2.78) 
>> ZEO is built in by default but must be instantiated thus:
>>
>> cd /opt/Zope-2/7/bin
>> ./mkzeoinstance /var/zeo
>>
>> or some such code. So I tried this:
>>
>> cd /usr/local/zope/278/bin
>> ./mkzeoinstance.py ../../instance2/var/zeo
>>
>> where 278 is my installation, instance2 is a Zope instance (I have 
>> 3), and mkzeoinstance.py is the command that works (mkzeoinstance by 
>> itself doesn't print anything to screen other than a command failed 
>> message). The Plone book then states that I must move Data.fs into 
>> the new /zeo/var dir, which I did. Everything seems to go well. If I 
>> start Zope using runzope I get this output at the tail end:
>>
>> ------
>> 2006-09-02T13:15:35 INFO(0) Zope Ready to handle requests
>
> In your .../log/events.log file you should see some zeo connection 
> activity, like:
>
>
> 2006-09-02T08:11:17 INFO Zope Ready to handle requests
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) ClientStorage 
> (pid=3196) created RW/normal for storage: '1'
> ------
> 2006-09-02T08:11:44 INFO ZEO.cache created temporary cache file 
> '<fdopen>'
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Testing connection 
> <ManagedClientConnection ('194.164.124.4', 8100)>
> ------
> 2006-09-02T08:11:44 INFO ZEO.zrpc.Connection(C) (194.164.124.4:8100) 
> received handshake 'Z303'
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Server 
> authentication protocol None
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Connected to 
> storage: ('sparrow.conetra.com', 8100)
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Verifying cache
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Waiting for cache 
> verification to finish
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) Waiting for cache 
> verification to finish
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) endVerify finishing
> ------
> 2006-09-02T08:11:44 INFO ZEO.ClientStorage (3196) endVerify finished
> ------
>
>
> This will tell you that your zeo client is connected to the zeo server
>
>
>
>> However, if I try to log into the ZMI my passwords don't work. I even 
>> tried creating an emergencyuser and that didn't work, either. What to 
>> do? Also, should I move these other files into the new zeo/var dir?
>>
>> Data.fs.index               Data.fs.lock                Data.fs.old 
>> Data.fs.tmp
>
> All you need is Data.fs.
>
> Data.fs.index will be recreated if it is not found when zope starts
> Data.fs.old is created when you pack your zodb
> You can safely ignore the .lock and .tmp files (they are created by 
> Zope as needed)
>
>
>
> Jonathan
>
>
>