[Zope3-checkins]
SVN: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/
Made unit tests be run from a normal layer.
Christian Theune
ct at gocept.com
Sun May 4 18:01:43 EDT 2008
Log message for revision 86428:
Made unit tests be run from a normal layer.
Changed:
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/filter.py
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/find.py
A zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/layer.py
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/listing.py
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/options.py
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/runner.py
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-colors.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-coverage.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-debugging.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-edge-cases.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-errors.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-gc.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers-api.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-leaks.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-profiling.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-progress.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-repeat.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-simple.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-test-selection.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-verbose.txt
U zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-wo-source.txt
-=-
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/filter.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/filter.py 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/filter.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -20,6 +20,9 @@
import zope.testing.testrunner.feature
+UNITTEST_LAYER = 'zope.testing.testrunner.layer.UnitTests'
+
+
class Filter(zope.testing.testrunner.feature.Feature):
"""Filters and orders all tests registered until now."""
@@ -29,7 +32,7 @@
layers = self.runner.tests_by_layer_name
options = self.runner.options
- if 'unit' in layers:
+ if UNITTEST_LAYER in layers:
# We start out assuming unit tests should run and look for reasons
# why they shouldn't be run.
should_run = True
@@ -37,7 +40,7 @@
if options.layer:
should_run = False
for pat in options.layer:
- if pat('unit'):
+ if pat(UNITTEST_LAYER):
should_run = True
break
else:
@@ -46,7 +49,7 @@
should_run = False
if not should_run:
- layers.pop('unit')
+ layers.pop(UNITTEST_LAYER)
if self.runner.options.resume_layer is not None:
for name in list(layers):
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/find.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/find.py 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/find.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -20,7 +20,9 @@
import os
import unittest
import sys
+
import zope.testing.testrunner.feature
+import zope.testing.testrunner.layer
identifier = re.compile(r'[_a-zA-Z]\w*$').match
@@ -258,7 +260,8 @@
return sys.modules[name]
-def tests_from_suite(suite, options, dlevel=1, dlayer='unit'):
+def tests_from_suite(suite, options, dlevel=1,
+ dlayer=zope.testing.testrunner.layer.UnitTests):
"""Returns a sequence of (test, layer_name)
The tree of suites is recursively visited, with the most specific
Added: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/layer.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/layer.py (rev 0)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/layer.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -0,0 +1,21 @@
+##############################################################################
+#
+# Copyright (c) 2004-2008 Zope Corporation and Contributors.
+# All Rights Reserved.
+#
+# This software is subject to the provisions of the Zope Public License,
+# Version 2.1 (ZPL). A copy of the ZPL should accompany this distribution.
+# THIS SOFTWARE IS PROVIDED "AS IS" AND ANY AND ALL EXPRESS OR IMPLIED
+# WARRANTIES ARE DISCLAIMED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+# WARRANTIES OF TITLE, MERCHANTABILITY, AGAINST INFRINGEMENT, AND FITNESS
+# FOR A PARTICULAR PURPOSE.
+#
+##############################################################################
+"""Layer definitions
+
+$Id: __init__.py 86223 2008-05-03 14:36:04Z ctheune $
+"""
+
+
+class UnitTests(object):
+ """A layer for gathering all unit tests."""
Property changes on: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/layer.py
___________________________________________________________________
Name: svn:eol-style
+ native
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/listing.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/listing.py 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/listing.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -33,7 +33,5 @@
def report(self):
layers = self.runner.tests_by_layer_name
- if 'unit' in layers:
- self.runner.options.output.list_of_tests(layers['unit'], 'unit')
for layer_name, layer, tests in self.runner.ordered_layers():
self.runner.options.output.list_of_tests(tests, layer_name)
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/options.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/options.py 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/options.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -105,8 +105,8 @@
extension of Python regexp notation, a leading "!" is stripped and
causes the sense of the remaining regexp to be negated (so "!bc"
matches any string that does not match "bc", and vice versa). The
-layer named 'unit' is reserved for unit tests, however, take note of
-the --unit and non-unit options.
+layer named 'zope.testing.testrunner.layer.UnitTests' is reserved for
+unit tests, however, take note of the --unit and non-unit options.
""")
searching.add_option(
@@ -578,7 +578,8 @@
options.unit = options.non_unit = False
if options.unit:
- options.layer = ['unit']
+ # XXX Argh.
+ options.layer = ['zope.testing.testrunner.layer.UnitTests']
if options.layer:
options.layer = map(compile_filter, options.layer)
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/runner.py
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/runner.py 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/runner.py 2008-05-04 22:01:43 UTC (rev 86428)
@@ -104,8 +104,7 @@
def ordered_layers(self):
layer_names = dict([(layer_from_name(layer_name), layer_name)
- for layer_name in self.tests_by_layer_name
- if layer_name != 'unit'])
+ for layer_name in self.tests_by_layer_name])
for layer in order_by_bases(layer_names):
layer_name = layer_names[layer]
yield layer_name, layer, self.tests_by_layer_name[layer_name]
@@ -204,20 +203,7 @@
Returns True if there where failures or False if all tests passed.
"""
- if 'unit' in self.tests_by_layer_name:
- tests = self.tests_by_layer_name.pop('unit')
- self.options.output.info("Running unit tests:")
- for feature in self.features:
- feature.layer_setup('unit')
- try:
- self.ran += run_tests(self.options, tests, 'unit',
- self.failures, self.errors)
- except EndRun:
- self.failed = True
- return
-
setup_layers = {}
-
layers_to_run = list(self.ordered_layers())
for layer_name, layer, tests in layers_to_run:
@@ -499,12 +485,9 @@
self.options = options
# Calculate our list of relevant layers we need to call testSetUp
# and testTearDown on.
- if layer_name != 'unit':
- layers = []
- gather_layers(layer_from_name(layer_name), layers)
- self.layers = order_by_bases(layers)
- else:
- self.layers = []
+ layers = []
+ gather_layers(layer_from_name(layer_name), layers)
+ self.layers = order_by_bases(layers)
count = 0
for test in tests:
count += test.countTestCases()
@@ -589,8 +572,6 @@
self.options.output.test_threads(test, new_threads)
-
-
def layer_from_name(layer_name):
"""Return the layer for the corresponding layer_name by discovering
and importing the necessary module if necessary.
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-colors.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-colors.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-colors.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -72,7 +72,38 @@
>>> sys.argv = 'test -c --tests-pattern ^sampletests(f|_e|_f)?$ '.split()
>>> testrunner.run(defaults)
- {normal}Running unit tests:{normal}
+ {normal}Running samplelayers.Layer1 tests:{normal}
+ Set up samplelayers.Layer1 in {green}0.000{normal} seconds.
+ {normal} Ran {green}9{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.001{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer11 tests:{normal}
+ Set up samplelayers.Layer11 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer111 tests:{normal}
+ Set up samplelayers.Layerx in {green}0.000{normal} seconds.
+ Set up samplelayers.Layer111 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer112 tests:{normal}
+ Tear down samplelayers.Layer111 in {green}0.000{normal} seconds.
+ Set up samplelayers.Layer112 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer12 tests:{normal}
+ Tear down samplelayers.Layer112 in {green}0.000{normal} seconds.
+ Tear down samplelayers.Layerx in {green}0.000{normal} seconds.
+ Tear down samplelayers.Layer11 in {green}0.000{normal} seconds.
+ Set up samplelayers.Layer12 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer121 tests:{normal}
+ Set up samplelayers.Layer121 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
+ {normal}Running samplelayers.Layer122 tests:{normal}
+ Tear down samplelayers.Layer121 in {green}0.000{normal} seconds.
+ Set up samplelayers.Layer122 in {green}0.000{normal} seconds.
+ {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
+ {normal}Running zope.testing.testrunner.layer.UnitTests tests:{normal}
+ Tear down samplelayers.Layer122 in {green}0.000{normal} seconds.
+ Tear down samplelayers.Layer12 in {green}0.000{normal} seconds.
+ Tear down samplelayers.Layer1 in {green}0.000{normal} seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
<BLANKLINE>
<BLANKLINE>
{boldred}Failure in test eek (sample2.sampletests_e){normal}
@@ -142,37 +173,8 @@
{red}AssertionError: 1 != 0{normal}
<BLANKLINE>
{normal} Ran {green}200{normal} tests with {boldred}3{normal} failures and {boldred}1{normal} errors in {green}0.045{normal} seconds.{normal}
- {normal}Running samplelayers.Layer1 tests:{normal}
- Set up samplelayers.Layer1 in {green}0.000{normal} seconds.
- {normal} Ran {green}9{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.001{normal} seconds.{normal}
- {normal}Running samplelayers.Layer11 tests:{normal}
- Set up samplelayers.Layer11 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
- {normal}Running samplelayers.Layer111 tests:{normal}
- Set up samplelayers.Layerx in {green}0.000{normal} seconds.
- Set up samplelayers.Layer111 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
- {normal}Running samplelayers.Layer112 tests:{normal}
- Tear down samplelayers.Layer111 in {green}0.000{normal} seconds.
- Set up samplelayers.Layer112 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
- {normal}Running samplelayers.Layer12 tests:{normal}
- Tear down samplelayers.Layer112 in {green}0.000{normal} seconds.
- Tear down samplelayers.Layerx in {green}0.000{normal} seconds.
- Tear down samplelayers.Layer11 in {green}0.000{normal} seconds.
- Set up samplelayers.Layer12 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
- {normal}Running samplelayers.Layer121 tests:{normal}
- Set up samplelayers.Layer121 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.007{normal} seconds.{normal}
- {normal}Running samplelayers.Layer122 tests:{normal}
- Tear down samplelayers.Layer121 in {green}0.000{normal} seconds.
- Set up samplelayers.Layer122 in {green}0.000{normal} seconds.
- {normal} Ran {green}34{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}0.008{normal} seconds.{normal}
{normal}Tearing down left over layers:{normal}
- Tear down samplelayers.Layer122 in {green}0.000{normal} seconds.
- Tear down samplelayers.Layer12 in {green}0.000{normal} seconds.
- Tear down samplelayers.Layer1 in {green}0.000{normal} seconds.
+ Tear down zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
{normal}Total: {green}413{normal} tests, {boldred}3{normal} failures, {boldred}1{normal} errors in {green}0.023{normal} seconds.{normal}
True
@@ -185,7 +187,8 @@
>>> sys.argv = 'test --tests-pattern ^pledge$ -c'.split()
>>> _ = testrunner.run(defaults)
- {normal}Running unit tests:{normal}
+ {normal}Running zope.testing.testrunner.layer.UnitTests tests:{normal}
+ Set up zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
<BLANKLINE>
<BLANKLINE>
{boldred}Failure in test pledge (pledge){normal}
@@ -208,13 +211,16 @@
{red} It's soils, minerals, forests, waters, and wildlife.{normal}
<BLANKLINE>
{normal} Ran {green}1{normal} tests with {boldred}1{normal} failures and {green}0{normal} errors in {green}0.002{normal} seconds.{normal}
+ {normal}Tearing down left over layers:{normal}
+ Tear down zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
Diffs are highlighted so you can easily tell the context and the mismatches
apart:
>>> sys.argv = 'test --tests-pattern ^pledge$ --ndiff -c'.split()
>>> _ = testrunner.run(defaults)
- {normal}Running unit tests:{normal}
+ {normal}Running zope.testing.testrunner.layer.UnitTests tests:{normal}
+ Set up zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
<BLANKLINE>
<BLANKLINE>
{boldred}Failure in test pledge (pledge){normal}
@@ -234,6 +240,8 @@
{normal} It's soils, minerals, forests, waters, and wildlife.{normal}
<BLANKLINE>
{normal} Ran {green}1{normal} tests with {boldred}1{normal} failures and {green}0{normal} errors in {green}0.003{normal} seconds.{normal}
+ {normal}Tearing down left over layers:{normal}
+ Tear down zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
Timing individual tests
@@ -244,7 +252,8 @@
>>> sys.argv = 'test -u -t test_one.TestNotMuch -c -vvv'.split()
>>> testrunner.run(defaults)
{normal}Running tests at level 1{normal}
- {normal}Running unit tests:{normal}
+ {normal}Running zope.testing.testrunner.layer.UnitTests tests:{normal}
+ Set up zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
{normal} Running:{normal}
test_1 (sample1.sampletests.test_one.TestNotMuch) ({green}N.NNN s{normal})
test_2 (sample1.sampletests.test_one.TestNotMuch) ({green}N.NNN s{normal})
@@ -253,8 +262,11 @@
test_2 (sampletests.test_one.TestNotMuch) ({green}N.NNN s{normal})
test_3 (sampletests.test_one.TestNotMuch) ({green}N.NNN s{normal})
{normal} Ran {green}6{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}N.NNN{normal} seconds.{normal}
+ {normal}Tearing down left over layers:{normal}
+ Tear down zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
False
+
If we had very slow tests we would see their times highlighted in a different color.
Instead of creating a test that waits 10 seconds, let's lower the slow test threshold
in the test runner to 0 seconds to make all of the tests seem slow.
@@ -262,7 +274,8 @@
>>> sys.argv = 'test -u -t test_one.TestNotMuch -c -vvv --slow-test 0'.split()
>>> testrunner.run(defaults)
{normal}Running tests at level 1{normal}
- {normal}Running unit tests:{normal}
+ {normal}Running zope.testing.testrunner.layer.UnitTests tests:{normal}
+ Set up zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
{normal} Running:{normal}
test_1 (sample1.sampletests.test_one.TestNotMuch) ({boldmagenta}N.NNN s{normal})
test_2 (sample1.sampletests.test_one.TestNotMuch) ({boldmagenta}N.NNN s{normal})
@@ -271,9 +284,12 @@
test_2 (sampletests.test_one.TestNotMuch) ({boldmagenta}N.NNN s{normal})
test_3 (sampletests.test_one.TestNotMuch) ({boldmagenta}N.NNN s{normal})
{normal} Ran {green}6{normal} tests with {green}0{normal} failures and {green}0{normal} errors in {green}N.NNN{normal} seconds.{normal}
+ {normal}Tearing down left over layers:{normal}
+ Tear down zope.testing.testrunner.layer.UnitTests in {green}N.NNN{normal} seconds.
False
+
Disabling colors
----------------
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-coverage.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-coverage.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-coverage.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -16,8 +16,6 @@
>>> from zope.testing import testrunner
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in 0.125 seconds.
Running samplelayers.Layer1 tests:
Set up samplelayers.Layer1 in 0.000 seconds.
Ran 9 tests with 0 failures and 0 errors in 0.003 seconds.
@@ -45,10 +43,14 @@
Tear down samplelayers.Layer121 in 0.000 seconds.
Set up samplelayers.Layer122 in 0.000 seconds.
Ran 34 tests with 0 failures and 0 errors in 0.025 seconds.
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Tear down samplelayers.Layer122 in N.NNN seconds.
+ Tear down samplelayers.Layer12 in N.NNN seconds.
+ Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
Tearing down left over layers:
- Tear down samplelayers.Layer122 in 0.000 seconds.
- Tear down samplelayers.Layer12 in 0.000 seconds.
- Tear down samplelayers.Layer1 in 0.000 seconds.
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
lines cov% module (path)
...
52 92% sample1.sampletests.test1 (testrunner-ex/sample1/sampletests/test1.py)
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-debugging.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-debugging.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-debugging.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -35,13 +35,15 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +ELLIPSIS
- Running unit tests:...
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
> testrunner-ex/sample3/sampletests_d.py(27)test_set_trace1()
-> y = x
(Pdb) p x
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.001 seconds.
+ ...
False
Note that, prior to Python 2.4, calling pdb.set_trace caused pdb to
@@ -59,9 +61,8 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE +REPORT_NDIFF
- Running unit tests:
- <BLANKLINE>
- <BLANKLINE>
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
Error in test test_post_mortem1 (sample3.sampletests_d.TestSomething)
Traceback (most recent call last):
File "testrunner-ex/sample3/sampletests_d.py",
@@ -89,9 +90,8 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE +REPORT_NDIFF
- Running unit tests:
- <BLANKLINE>
- <BLANKLINE>
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
Error in test test_post_mortem_failure1 (sample3.sampletests_d.TestSomething)
Traceback (most recent call last):
File ".../unittest.py", line 252, in debug
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-edge-cases.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-edge-cases.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-edge-cases.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -35,12 +35,20 @@
>>> sys.argv = ['test']
>>> testrunner.run(defaults)
... # doctest: +ELLIPSIS
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in 0.028 seconds.
Running samplelayers.Layer1 tests:
Set up samplelayers.Layer1 in 0.000 seconds.
Ran 9 tests with 0 failures and 0 errors in 0.000 seconds.
...
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Tear down samplelayers.Layer122 in N.NNN seconds.
+ Tear down samplelayers.Layer12 in N.NNN seconds.
+ Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Total: 405 tests, 0 failures, 0 errors in N.NNN seconds.
+ False
Debugging Edge Cases
--------------------
@@ -66,13 +74,14 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +ELLIPSIS
- Running unit tests:...
+ Running zope.testing.testrunner.layer.UnitTests tests:...
> testrunner-ex/sample3/sampletests_d.py(47)f()
-> y = x
(Pdb) p x
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.001 seconds.
+ ...
False
Using pdb.set_trace in a function called by a doctest in a doc string:
@@ -82,7 +91,7 @@
... ' -t set_trace4').split()
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
--Return--
> doctest.py(351)set_trace()->None
-> pdb.Pdb.set_trace(self)
@@ -93,6 +102,7 @@
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.002 seconds.
+ ...
False
Using pdb in a docstring-based doctest
@@ -102,7 +112,7 @@
... ' -t set_trace3').split()
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
--Return--
> doctest.py(351)set_trace()->None
-> pdb.Pdb.set_trace(self)
@@ -113,6 +123,7 @@
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.002 seconds.
+ ...
False
Using pdb.set_trace in a doc file:
@@ -123,7 +134,7 @@
... ' -t set_trace5').split()
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
--Return--
> doctest.py(351)set_trace()->None
-> pdb.Pdb.set_trace(self)
@@ -134,6 +145,7 @@
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.002 seconds.
+ ...
False
@@ -145,7 +157,7 @@
... ' -t set_trace6').split()
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
--Return--
> doctest.py(351)set_trace()->None
-> pdb.Pdb.set_trace(self)
@@ -156,6 +168,7 @@
1
(Pdb) c
Ran 1 tests with 0 failures and 0 errors in 0.002 seconds.
+ ...
False
Post-mortem debugging function called from ordinary test:
@@ -166,7 +179,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
<BLANKLINE>
<BLANKLINE>
Error in test test_post_mortem2 (sample3.sampletests_d.TestSomething)
@@ -196,9 +209,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
- <BLANKLINE>
- <BLANKLINE>
+ Running zope.testing.testrunner.layer.UnitTests tests:...
Error in test post_mortem3 (sample3.sampletests_d)
Traceback (most recent call last):
File "zope/testing/doctest.py", line 2276, in debug
@@ -230,9 +241,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
- <BLANKLINE>
- <BLANKLINE>
+ Running zope.testing.testrunner.layer.UnitTests tests:...
Error in test post_mortem4 (sample3.sampletests_d)
Traceback (most recent call last):
File "zope/testing/doctest.py", line 2276, in debug
@@ -264,7 +273,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
<BLANKLINE>
<BLANKLINE>
Error in test zope/testing/testrunner-ex/sample3/post_mortem5.txt
@@ -298,7 +307,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
<BLANKLINE>
<BLANKLINE>
Error in test zope/testing/testrunner-ex/sample3/post_mortem6.txt
@@ -332,7 +341,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
<BLANKLINE>
<BLANKLINE>
Error in test post_mortem_failure2 (sample3.sampletests_d)
@@ -367,7 +376,7 @@
>>> try: testrunner.run(defaults)
... finally: sys.stdin = real_stdin
... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
<BLANKLINE>
<BLANKLINE>
Error in test /home/jim/z3/zope.testing/src/zope/testing/testrunner-ex/sample3/post_mortem_failure.txt
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-errors.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-errors.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-errors.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -25,8 +25,11 @@
>>> sys.argv = 'test --tests-pattern ^sampletests(f|_e|_f)?$ '.split()
>>> testrunner.run(defaults)
- ... # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ ... # doctest: +NORMALIZE_WHITESPACE +ELLIPSIS
+ Running samplelayers.Layer1 tests:
+ ...
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
<BLANKLINE>
<BLANKLINE>
Failure in test eek (sample2.sampletests_e)
@@ -91,38 +94,9 @@
raise self.failureException, \
AssertionError: 1 != 0
<BLANKLINE>
- Ran 200 tests with 3 failures and 1 errors in 0.038 seconds.
- Running samplelayers.Layer1 tests:
- Set up samplelayers.Layer1 in 0.000 seconds.
- Ran 9 tests with 0 failures and 0 errors in 0.000 seconds.
- Running samplelayers.Layer11 tests:
- Set up samplelayers.Layer11 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.007 seconds.
- Running samplelayers.Layer111 tests:
- Set up samplelayers.Layerx in 0.000 seconds.
- Set up samplelayers.Layer111 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.007 seconds.
- Running samplelayers.Layer112 tests:
- Tear down samplelayers.Layer111 in 0.000 seconds.
- Set up samplelayers.Layer112 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.006 seconds.
- Running samplelayers.Layer12 tests:
- Tear down samplelayers.Layer112 in 0.000 seconds.
- Tear down samplelayers.Layerx in 0.000 seconds.
- Tear down samplelayers.Layer11 in 0.000 seconds.
- Set up samplelayers.Layer12 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.007 seconds.
- Running samplelayers.Layer121 tests:
- Set up samplelayers.Layer121 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.006 seconds.
- Running samplelayers.Layer122 tests:
- Tear down samplelayers.Layer121 in 0.000 seconds.
- Set up samplelayers.Layer122 in 0.000 seconds.
- Ran 34 tests with 0 failures and 0 errors in 0.007 seconds.
+ Ran 200 tests with 3 failures and 1 errors in N.NNN seconds.
Tearing down left over layers:
- Tear down samplelayers.Layer122 in 0.000 seconds.
- Tear down samplelayers.Layer12 in 0.000 seconds.
- Tear down samplelayers.Layer1 in 0.000 seconds.
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 413 tests, 3 failures, 1 errors in N.NNN seconds.
True
@@ -137,9 +111,10 @@
>>> testrunner.run(defaults)
... # doctest: +NORMALIZE_WHITESPACE +REPORT_NDIFF
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
Running:
- .................................................................................................
+ .................................................................................................
<BLANKLINE>
Failure in test eek (sample2.sampletests_e)
Failed doctest test for sample2.sampletests_e.eek
@@ -208,6 +183,7 @@
................................................................................................
<BLANKLINE>
Ran 200 tests with 3 failures and 1 errors in 0.040 seconds.
+ ...
<BLANKLINE>
Tests with errors:
test3 (sample2.sampletests_e.Test)
@@ -224,7 +200,8 @@
... ' -p').split()
>>> testrunner.run(defaults)
... # doctest: +NORMALIZE_WHITESPACE +REPORT_NDIFF
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
1/56 (1.8%)
<BLANKLINE>
@@ -379,6 +356,8 @@
\r
<BLANKLINE>
Ran 56 tests with 3 failures and 1 errors in 0.054 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
If you also want a summary of errors at the end, ask for verbosity as well
@@ -393,7 +372,8 @@
>>> sys.argv = 'test --tests-pattern ^sampletests_1$'.split()
>>> testrunner.run(defaults) # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test eek (sample2.sampletests_1)
@@ -438,6 +418,8 @@
NameError: name 'x' is not defined
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
This can be a bit confusing, especially when there are enough tests
@@ -447,7 +429,8 @@
>>> sys.argv = 'test --tests-pattern ^sampletests_1$ -1'.split()
>>> testrunner.run(defaults) # doctest:
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test eek (sample2.sampletests_1)
@@ -468,6 +451,8 @@
NameError: name 'y' is not defined
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.001 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
The --hide-secondary-failures option is an alias for -1:
@@ -477,7 +462,8 @@
... ' --hide-secondary-failures'
... ).split()
>>> testrunner.run(defaults) # doctest:
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test eek (sample2.sampletests_1)
@@ -498,6 +484,8 @@
NameError: name 'y' is not defined
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.001 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
The --show-secondary-failures option counters -1 (or it's alias),
@@ -510,7 +498,8 @@
... ' --hide-secondary-failures --show-secondary-failures'
... ).split()
>>> testrunner.run(defaults) # doctest: +NORMALIZE_WHITESPACE
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test eek (sample2.sampletests_1)
@@ -555,6 +544,8 @@
NameError: name 'x' is not defined
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
@@ -568,7 +559,8 @@
>>> sys.argv = 'test --tests-pattern ^pledge$'.split()
>>> _ = testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test pledge (pledge)
@@ -591,6 +583,8 @@
It's soils, minerals, forests, waters, and wildlife.
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Here, the actual output uses the word "and" rather than the word "an",
but it's a bit hard to pick this out. We can use the various diff
@@ -605,7 +599,8 @@
>>> sys.argv = 'test --tests-pattern ^pledge$ --ndiff'.split()
>>> _ = testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test pledge (pledge)
@@ -625,12 +620,15 @@
It's soils, minerals, forests, waters, and wildlife.
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.003 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
The -udiff option requests a standard "unified" diff:
>>> sys.argv = 'test --tests-pattern ^pledge$ --udiff'.split()
>>> _ = testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test pledge (pledge)
@@ -649,12 +647,15 @@
the natural resources of my planet.
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
The -cdiff option requests a standard "context" diff:
>>> sys.argv = 'test --tests-pattern ^pledge$ --cdiff'.split()
>>> _ = testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure in test pledge (pledge)
@@ -677,6 +678,8 @@
the natural resources of my planet.
<BLANKLINE>
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Testing-Module Import Errors
@@ -783,7 +786,8 @@
>>> sys.argv = 'test --tests-pattern ^unicode$ -u'.split()
>>> testrunner.run(defaults) # doctest: +REPORT_NDIFF
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
<BLANKLINE>
<BLANKLINE>
Failure testrunner-ex/unicode.txt
@@ -808,6 +812,8 @@
'xyz'
<BLANKLINE>
Ran 3 tests with 1 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
True
@@ -829,9 +835,12 @@
... else:
... print 'sys.exit was not called'
... # doctest: +ELLIPSIS
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
...
Ran 1 tests with 1 failures and 0 errors in 0.002 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
exited with code 1
A passing test does not exit.
@@ -845,8 +854,16 @@
... else:
... print 'sys.exit was not called'
... # doctest: +ELLIPSIS
- Running unit tests:
+ Running samplelayers.Layer11 tests:
...
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Tear down samplelayers.Layer122 in N.NNN seconds.
+ Tear down samplelayers.Layer12 in N.NNN seconds.
+ Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 160 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 364 tests, 0 failures, 0 errors in N.NNN seconds.
...
sys.exit was not called
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-gc.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-gc.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-gc.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -15,16 +15,20 @@
>>> defaults = ['--path', directory_with_tests]
>>> from zope.testing import testrunner
-
+
>>> sys.argv = 'test --tests-pattern ^gc0$ --gc 0 -vv'.split()
>>> _ = testrunner.run(defaults)
Cyclic garbage collection is disabled.
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- make_sure_gc_is_disabled (gc0)
- Ran 1 tests with 0 failures and 0 errors in 0.001 seconds.
+ make_sure_gc_is_disabled (gc0)
+ Ran 1 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+
Alternatively, if you think you are having a garbage collection
related problem, you can cause garbage collection to happen more often
by providing a low threshold:
@@ -33,10 +37,13 @@
>>> _ = testrunner.run(defaults)
Cyclic garbage collection threshold set to: (1,)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- make_sure_gc_threshold_is_one (gc1)
- Ran 1 tests with 0 failures and 0 errors in 0.001 seconds.
+ make_sure_gc_threshold_is_one (gc1)
+ Ran 1 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
You can specify up to 3 --gc options to set each of the 3 gc threshold
values:
@@ -47,11 +54,15 @@
>>> _ = testrunner.run(defaults)
Cyclic garbage collection threshold set to: (701, 11, 9)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- make_sure_gc_threshold_is_701_11_9 (gcset)
- Ran 1 tests with 0 failures and 0 errors in 0.001 seconds.
+ make_sure_gc_threshold_is_701_11_9 (gcset)
+ Ran 1 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+
Garbage Collection Statistics
-----------------------------
@@ -70,13 +81,15 @@
... .split())
>>> _ = testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- generate_some_gc_statistics (gcstats)
- Ran 1 tests with 0 failures and 0 errors in 0.006 seconds.
+ generate_some_gc_statistics (gcstats)
+ Ran 1 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
>>> sys.stderr = stderr
>>> print err.getvalue() # doctest: +ELLIPSIS
gc: collecting generation ...
-
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers-api.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers-api.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers-api.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -114,15 +114,18 @@
>>> from zope.testing.testrunner.runner import Runner
>>> runner = Runner(options=fresh_options(), args=[], found_suites=[umbrella_suite])
>>> succeeded = runner.run()
-Running unit tests:
- Ran 2 tests with 0 failures and 0 errors in N.NNN seconds.
Running BaseLayer tests:
Set up BaseLayer in N.NNN seconds.
Ran 2 tests with 0 failures and 0 errors in N.NNN seconds.
+Running zope.testing.testrunner.layer.UnitTests tests:
+ Tear down BaseLayer in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 2 tests with 0 failures and 0 errors in N.NNN seconds.
Tearing down left over layers:
- Tear down BaseLayer in N.NNN seconds.
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 4 tests, 0 failures, 0 errors in N.NNN seconds.
+
Now lets specify a layer in the suite containing TestSpecifyingNoLayer
and run the tests again. This demonstrates the other method of specifying
a layer. This is generally how you specify what layer doctests need.
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-layers.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -10,33 +10,40 @@
... '--tests-pattern', '^sampletestsf?$',
... ]
- >>> sys.argv = 'test --layer 112 --layer unit'.split()
+ >>> sys.argv = 'test --layer 112 --layer Unit'.split()
>>> from zope.testing import testrunner
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
Running samplelayers.Layer112 tests:
Set up samplelayers.Layerx in N.NNN seconds.
Set up samplelayers.Layer1 in N.NNN seconds.
Set up samplelayers.Layer11 in N.NNN seconds.
Set up samplelayers.Layer112 in N.NNN seconds.
Ran 34 tests with 0 failures and 0 errors in N.NNN seconds.
- Tearing down left over layers:
+ Running zope.testing.testrunner.layer.UnitTests tests:
Tear down samplelayers.Layer112 in N.NNN seconds.
Tear down samplelayers.Layerx in N.NNN seconds.
Tear down samplelayers.Layer11 in N.NNN seconds.
Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 226 tests, 0 failures, 0 errors in N.NNN seconds.
False
+
We can also specify that we want to run only the unit tests:
>>> sys.argv = 'test -u'.split()
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in 0.033 seconds.
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
Or that we want to run all of the tests except for the unit tests:
>>> sys.argv = 'test -f'.split()
@@ -79,8 +86,6 @@
>>> sys.argv = 'test -uf'.split()
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in 0.033 seconds.
Running samplelayers.Layer1 tests:
Set up samplelayers.Layer1 in N.NNN seconds.
Ran 9 tests with 0 failures and 0 errors in N.NNN seconds.
@@ -108,10 +113,14 @@
Tear down samplelayers.Layer121 in N.NNN seconds.
Set up samplelayers.Layer122 in N.NNN seconds.
Ran 34 tests with 0 failures and 0 errors in N.NNN seconds.
- Tearing down left over layers:
+ Running zope.testing.testrunner.layer.UnitTests tests:
Tear down samplelayers.Layer122 in N.NNN seconds.
Tear down samplelayers.Layer12 in N.NNN seconds.
Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 405 tests, 0 failures, 0 errors in N.NNN seconds.
False
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-leaks.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-leaks.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-leaks.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -61,7 +61,7 @@
>>> sys.argv = 'test --tests-pattern leak -N4 -r'.split()
>>> _ = testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
Iteration 1
Ran 1 tests with 0 failures and 0 errors in 0.000 seconds.
Iteration 2
@@ -73,6 +73,8 @@
Iteration 4
Ran 1 tests with 0 failures and 0 errors in 0.000 seconds.
sys refcount=92520 change=12
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Here we see that the system refcount is increating. If we specify a
verbosity greater than one, we can get details broken out by object
@@ -81,7 +83,7 @@
>>> sys.argv = 'test --tests-pattern leak -N5 -r -v'.split()
>>> _ = testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:...
Iteration 1
Running:
.
@@ -160,6 +162,8 @@
type 0 1
------------------------------------------------------- ----- ----
total 6 12
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
It is instructive to analyze the results in some detail. The test
being run was designed to intentionally leak:
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-profiling.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-profiling.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-profiling.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -19,12 +19,12 @@
>>> from zope.testing import testrunner
>>> testrunner.run(defaults)
- Running unit tests:
- ...
Running samplelayers.Layer1 tests:
...
Running samplelayers.Layer11 tests:
...
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ ...
ncalls tottime percall cumtime percall filename:lineno(function)
...
Total: ... tests, 0 failures, 0 errors in ... seconds.
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-progress.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-progress.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-progress.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -384,7 +384,8 @@
>>> sys.argv = 'test -u -t test_one.TestNotMuch --auto-progress'.split()
>>> testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
1/6 (16.7%)\r
\r
@@ -399,17 +400,23 @@
6/6 (100.0%)\r
\r
<BLANKLINE>
- Ran 6 tests with 0 failures and 0 errors in 0.000 seconds.
+ Ran 6 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
Let's stop pretending
>>> sys.stdout = real_stdout
>>> sys.argv = 'test -u -t test_one.TestNotMuch --auto-progress'.split()
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 6 tests with 0 failures and 0 errors in 0.000 seconds.
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 6 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
@@ -422,7 +429,12 @@
>>> sys.argv = 'test -u -t test_one.TestNotMuch -p --no-progress'.split()
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 6 tests with 0 failures and 0 errors in 0.000 seconds.
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 6 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
+
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-repeat.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-repeat.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-repeat.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -12,16 +12,9 @@
... '--tests-pattern', '^sampletestsf?$',
... ]
- >>> sys.argv = 'test --layer 112 --layer unit --repeat 3'.split()
+ >>> sys.argv = 'test --layer 112 --layer UnitTests --repeat 3'.split()
>>> from zope.testing import testrunner
>>> testrunner.run(defaults)
- Running unit tests:
- Iteration 1
- Ran 192 tests with 0 failures and 0 errors in 0.054 seconds.
- Iteration 2
- Ran 192 tests with 0 failures and 0 errors in 0.054 seconds.
- Iteration 3
- Ran 192 tests with 0 failures and 0 errors in 0.052 seconds.
Running samplelayers.Layer112 tests:
Set up samplelayers.Layerx in 0.000 seconds.
Set up samplelayers.Layer1 in 0.000 seconds.
@@ -33,14 +26,22 @@
Ran 34 tests with 0 failures and 0 errors in 0.010 seconds.
Iteration 3
Ran 34 tests with 0 failures and 0 errors in 0.010 seconds.
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Tear down samplelayers.Layer112 in N.NNN seconds.
+ Tear down samplelayers.Layerx in N.NNN seconds.
+ Tear down samplelayers.Layer11 in N.NNN seconds.
+ Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Iteration 1
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Iteration 2
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Iteration 3
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
Tearing down left over layers:
- Tear down samplelayers.Layer112 in 0.000 seconds.
- Tear down samplelayers.Layerx in 0.000 seconds.
- Tear down samplelayers.Layer11 in 0.000 seconds.
- Tear down samplelayers.Layer1 in 0.000 seconds.
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 226 tests, 0 failures, 0 errors in N.NNN seconds.
False
The tests are repeated by layer. Layers are set up and torn down only
once.
-
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-simple.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-simple.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-simple.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -47,8 +47,6 @@
>>> import sys
>>> sys.argv = ['test']
>>> testrunner.run(defaults)
- Running unit tests:
- Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
Running samplelayers.Layer1 tests:
Set up samplelayers.Layer1 in N.NNN seconds.
Ran 9 tests with 0 failures and 0 errors in N.NNN seconds.
@@ -76,10 +74,14 @@
Tear down samplelayers.Layer121 in N.NNN seconds.
Set up samplelayers.Layer122 in N.NNN seconds.
Ran 34 tests with 0 failures and 0 errors in N.NNN seconds.
- Tearing down left over layers:
+ Running zope.testing.testrunner.layer.UnitTests tests:
Tear down samplelayers.Layer122 in N.NNN seconds.
Tear down samplelayers.Layer12 in N.NNN seconds.
Tear down samplelayers.Layer1 in N.NNN seconds.
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
+ Ran 192 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Total: 405 tests, 0 failures, 0 errors in N.NNN seconds.
False
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-test-selection.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-test-selection.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-test-selection.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -45,113 +45,116 @@
>>> sys.argv = 'test -u -vv -ssample1 -ssample2'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_x1 (sample1.sampletestsf.TestA)
- test_y0 (sample1.sampletestsf.TestA)
- test_z0 (sample1.sampletestsf.TestA)
- test_x0 (sample1.sampletestsf.TestB)
- test_y1 (sample1.sampletestsf.TestB)
- test_z0 (sample1.sampletestsf.TestB)
- test_1 (sample1.sampletestsf.TestNotMuch)
- test_2 (sample1.sampletestsf.TestNotMuch)
- test_3 (sample1.sampletestsf.TestNotMuch)
- test_x0 (sample1.sampletestsf)
- test_y0 (sample1.sampletestsf)
- test_z1 (sample1.sampletestsf)
- testrunner-ex/sample1/../sampletests.txt
- test_x1 (sample1.sample11.sampletests.TestA)
- test_y0 (sample1.sample11.sampletests.TestA)
- test_z0 (sample1.sample11.sampletests.TestA)
- test_x0 (sample1.sample11.sampletests.TestB)
- test_y1 (sample1.sample11.sampletests.TestB)
- test_z0 (sample1.sample11.sampletests.TestB)
- test_1 (sample1.sample11.sampletests.TestNotMuch)
- test_2 (sample1.sample11.sampletests.TestNotMuch)
- test_3 (sample1.sample11.sampletests.TestNotMuch)
- test_x0 (sample1.sample11.sampletests)
- test_y0 (sample1.sample11.sampletests)
- test_z1 (sample1.sample11.sampletests)
- testrunner-ex/sample1/sample11/../../sampletests.txt
- test_x1 (sample1.sample13.sampletests.TestA)
- test_y0 (sample1.sample13.sampletests.TestA)
- test_z0 (sample1.sample13.sampletests.TestA)
- test_x0 (sample1.sample13.sampletests.TestB)
- test_y1 (sample1.sample13.sampletests.TestB)
- test_z0 (sample1.sample13.sampletests.TestB)
- test_1 (sample1.sample13.sampletests.TestNotMuch)
- test_2 (sample1.sample13.sampletests.TestNotMuch)
- test_3 (sample1.sample13.sampletests.TestNotMuch)
- test_x0 (sample1.sample13.sampletests)
- test_y0 (sample1.sample13.sampletests)
- test_z1 (sample1.sample13.sampletests)
- testrunner-ex/sample1/sample13/../../sampletests.txt
- test_x1 (sample1.sampletests.test1.TestA)
- test_y0 (sample1.sampletests.test1.TestA)
- test_z0 (sample1.sampletests.test1.TestA)
- test_x0 (sample1.sampletests.test1.TestB)
- test_y1 (sample1.sampletests.test1.TestB)
- test_z0 (sample1.sampletests.test1.TestB)
- test_1 (sample1.sampletests.test1.TestNotMuch)
- test_2 (sample1.sampletests.test1.TestNotMuch)
- test_3 (sample1.sampletests.test1.TestNotMuch)
- test_x0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test1)
- test_z1 (sample1.sampletests.test1)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- test_x1 (sample1.sampletests.test_one.TestA)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_z0 (sample1.sampletests.test_one.TestA)
- test_x0 (sample1.sampletests.test_one.TestB)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_z0 (sample1.sampletests.test_one.TestB)
- test_1 (sample1.sampletests.test_one.TestNotMuch)
- test_2 (sample1.sampletests.test_one.TestNotMuch)
- test_3 (sample1.sampletests.test_one.TestNotMuch)
- test_x0 (sample1.sampletests.test_one)
- test_y0 (sample1.sampletests.test_one)
- test_z1 (sample1.sampletests.test_one)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- test_x1 (sample2.sample21.sampletests.TestA)
- test_y0 (sample2.sample21.sampletests.TestA)
- test_z0 (sample2.sample21.sampletests.TestA)
- test_x0 (sample2.sample21.sampletests.TestB)
- test_y1 (sample2.sample21.sampletests.TestB)
- test_z0 (sample2.sample21.sampletests.TestB)
- test_1 (sample2.sample21.sampletests.TestNotMuch)
- test_2 (sample2.sample21.sampletests.TestNotMuch)
- test_3 (sample2.sample21.sampletests.TestNotMuch)
- test_x0 (sample2.sample21.sampletests)
- test_y0 (sample2.sample21.sampletests)
- test_z1 (sample2.sample21.sampletests)
- testrunner-ex/sample2/sample21/../../sampletests.txt
- test_x1 (sample2.sampletests.test_1.TestA)
- test_y0 (sample2.sampletests.test_1.TestA)
- test_z0 (sample2.sampletests.test_1.TestA)
- test_x0 (sample2.sampletests.test_1.TestB)
- test_y1 (sample2.sampletests.test_1.TestB)
- test_z0 (sample2.sampletests.test_1.TestB)
- test_1 (sample2.sampletests.test_1.TestNotMuch)
- test_2 (sample2.sampletests.test_1.TestNotMuch)
- test_3 (sample2.sampletests.test_1.TestNotMuch)
- test_x0 (sample2.sampletests.test_1)
- test_y0 (sample2.sampletests.test_1)
- test_z1 (sample2.sampletests.test_1)
- testrunner-ex/sample2/sampletests/../../sampletests.txt
- test_x1 (sample2.sampletests.testone.TestA)
- test_y0 (sample2.sampletests.testone.TestA)
- test_z0 (sample2.sampletests.testone.TestA)
- test_x0 (sample2.sampletests.testone.TestB)
- test_y1 (sample2.sampletests.testone.TestB)
- test_z0 (sample2.sampletests.testone.TestB)
- test_1 (sample2.sampletests.testone.TestNotMuch)
- test_2 (sample2.sampletests.testone.TestNotMuch)
- test_3 (sample2.sampletests.testone.TestNotMuch)
- test_x0 (sample2.sampletests.testone)
- test_y0 (sample2.sampletests.testone)
- test_z1 (sample2.sampletests.testone)
- testrunner-ex/sample2/sampletests/../../sampletests.txt
- Ran 128 tests with 0 failures and 0 errors in 0.025 seconds.
+ test_x1 (sample1.sampletestsf.TestA)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_z0 (sample1.sampletestsf.TestA)
+ test_x0 (sample1.sampletestsf.TestB)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_z0 (sample1.sampletestsf.TestB)
+ test_1 (sample1.sampletestsf.TestNotMuch)
+ test_2 (sample1.sampletestsf.TestNotMuch)
+ test_3 (sample1.sampletestsf.TestNotMuch)
+ test_x0 (sample1.sampletestsf)
+ test_y0 (sample1.sampletestsf)
+ test_z1 (sample1.sampletestsf)
+ testrunner-ex/sample1/../sampletests.txt
+ test_x1 (sample1.sample11.sampletests.TestA)
+ test_y0 (sample1.sample11.sampletests.TestA)
+ test_z0 (sample1.sample11.sampletests.TestA)
+ test_x0 (sample1.sample11.sampletests.TestB)
+ test_y1 (sample1.sample11.sampletests.TestB)
+ test_z0 (sample1.sample11.sampletests.TestB)
+ test_1 (sample1.sample11.sampletests.TestNotMuch)
+ test_2 (sample1.sample11.sampletests.TestNotMuch)
+ test_3 (sample1.sample11.sampletests.TestNotMuch)
+ test_x0 (sample1.sample11.sampletests)
+ test_y0 (sample1.sample11.sampletests)
+ test_z1 (sample1.sample11.sampletests)
+ testrunner-ex/sample1/sample11/../../sampletests.txt
+ test_x1 (sample1.sample13.sampletests.TestA)
+ test_y0 (sample1.sample13.sampletests.TestA)
+ test_z0 (sample1.sample13.sampletests.TestA)
+ test_x0 (sample1.sample13.sampletests.TestB)
+ test_y1 (sample1.sample13.sampletests.TestB)
+ test_z0 (sample1.sample13.sampletests.TestB)
+ test_1 (sample1.sample13.sampletests.TestNotMuch)
+ test_2 (sample1.sample13.sampletests.TestNotMuch)
+ test_3 (sample1.sample13.sampletests.TestNotMuch)
+ test_x0 (sample1.sample13.sampletests)
+ test_y0 (sample1.sample13.sampletests)
+ test_z1 (sample1.sample13.sampletests)
+ testrunner-ex/sample1/sample13/../../sampletests.txt
+ test_x1 (sample1.sampletests.test1.TestA)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_z0 (sample1.sampletests.test1.TestA)
+ test_x0 (sample1.sampletests.test1.TestB)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_z0 (sample1.sampletests.test1.TestB)
+ test_1 (sample1.sampletests.test1.TestNotMuch)
+ test_2 (sample1.sampletests.test1.TestNotMuch)
+ test_3 (sample1.sampletests.test1.TestNotMuch)
+ test_x0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test1)
+ test_z1 (sample1.sampletests.test1)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ test_x1 (sample1.sampletests.test_one.TestA)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_z0 (sample1.sampletests.test_one.TestA)
+ test_x0 (sample1.sampletests.test_one.TestB)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_z0 (sample1.sampletests.test_one.TestB)
+ test_1 (sample1.sampletests.test_one.TestNotMuch)
+ test_2 (sample1.sampletests.test_one.TestNotMuch)
+ test_3 (sample1.sampletests.test_one.TestNotMuch)
+ test_x0 (sample1.sampletests.test_one)
+ test_y0 (sample1.sampletests.test_one)
+ test_z1 (sample1.sampletests.test_one)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ test_x1 (sample2.sample21.sampletests.TestA)
+ test_y0 (sample2.sample21.sampletests.TestA)
+ test_z0 (sample2.sample21.sampletests.TestA)
+ test_x0 (sample2.sample21.sampletests.TestB)
+ test_y1 (sample2.sample21.sampletests.TestB)
+ test_z0 (sample2.sample21.sampletests.TestB)
+ test_1 (sample2.sample21.sampletests.TestNotMuch)
+ test_2 (sample2.sample21.sampletests.TestNotMuch)
+ test_3 (sample2.sample21.sampletests.TestNotMuch)
+ test_x0 (sample2.sample21.sampletests)
+ test_y0 (sample2.sample21.sampletests)
+ test_z1 (sample2.sample21.sampletests)
+ testrunner-ex/sample2/sample21/../../sampletests.txt
+ test_x1 (sample2.sampletests.test_1.TestA)
+ test_y0 (sample2.sampletests.test_1.TestA)
+ test_z0 (sample2.sampletests.test_1.TestA)
+ test_x0 (sample2.sampletests.test_1.TestB)
+ test_y1 (sample2.sampletests.test_1.TestB)
+ test_z0 (sample2.sampletests.test_1.TestB)
+ test_1 (sample2.sampletests.test_1.TestNotMuch)
+ test_2 (sample2.sampletests.test_1.TestNotMuch)
+ test_3 (sample2.sampletests.test_1.TestNotMuch)
+ test_x0 (sample2.sampletests.test_1)
+ test_y0 (sample2.sampletests.test_1)
+ test_z1 (sample2.sampletests.test_1)
+ testrunner-ex/sample2/sampletests/../../sampletests.txt
+ test_x1 (sample2.sampletests.testone.TestA)
+ test_y0 (sample2.sampletests.testone.TestA)
+ test_z0 (sample2.sampletests.testone.TestA)
+ test_x0 (sample2.sampletests.testone.TestB)
+ test_y1 (sample2.sampletests.testone.TestB)
+ test_z0 (sample2.sampletests.testone.TestB)
+ test_1 (sample2.sampletests.testone.TestNotMuch)
+ test_2 (sample2.sampletests.testone.TestNotMuch)
+ test_3 (sample2.sampletests.testone.TestNotMuch)
+ test_x0 (sample2.sampletests.testone)
+ test_y0 (sample2.sampletests.testone)
+ test_z1 (sample2.sampletests.testone)
+ testrunner-ex/sample2/sampletests/../../sampletests.txt
+ Ran 128 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
You can specify directory names instead of packages (useful for
@@ -192,69 +195,80 @@
>>> sys.argv = 'test -u -vv -ssample1 -m_one -mtest1'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_x1 (sample1.sampletests.test1.TestA)
- test_y0 (sample1.sampletests.test1.TestA)
- test_z0 (sample1.sampletests.test1.TestA)
- test_x0 (sample1.sampletests.test1.TestB)
- test_y1 (sample1.sampletests.test1.TestB)
- test_z0 (sample1.sampletests.test1.TestB)
- test_1 (sample1.sampletests.test1.TestNotMuch)
- test_2 (sample1.sampletests.test1.TestNotMuch)
- test_3 (sample1.sampletests.test1.TestNotMuch)
- test_x0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test1)
- test_z1 (sample1.sampletests.test1)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- test_x1 (sample1.sampletests.test_one.TestA)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_z0 (sample1.sampletests.test_one.TestA)
- test_x0 (sample1.sampletests.test_one.TestB)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_z0 (sample1.sampletests.test_one.TestB)
- test_1 (sample1.sampletests.test_one.TestNotMuch)
- test_2 (sample1.sampletests.test_one.TestNotMuch)
- test_3 (sample1.sampletests.test_one.TestNotMuch)
- test_x0 (sample1.sampletests.test_one)
- test_y0 (sample1.sampletests.test_one)
- test_z1 (sample1.sampletests.test_one)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- Ran 32 tests with 0 failures and 0 errors in 0.008 seconds.
+ test_x1 (sample1.sampletests.test1.TestA)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_z0 (sample1.sampletests.test1.TestA)
+ test_x0 (sample1.sampletests.test1.TestB)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_z0 (sample1.sampletests.test1.TestB)
+ test_1 (sample1.sampletests.test1.TestNotMuch)
+ test_2 (sample1.sampletests.test1.TestNotMuch)
+ test_3 (sample1.sampletests.test1.TestNotMuch)
+ test_x0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test1)
+ test_z1 (sample1.sampletests.test1)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ test_x1 (sample1.sampletests.test_one.TestA)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_z0 (sample1.sampletests.test_one.TestA)
+ test_x0 (sample1.sampletests.test_one.TestB)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_z0 (sample1.sampletests.test_one.TestB)
+ test_1 (sample1.sampletests.test_one.TestNotMuch)
+ test_2 (sample1.sampletests.test_one.TestNotMuch)
+ test_3 (sample1.sampletests.test_one.TestNotMuch)
+ test_x0 (sample1.sampletests.test_one)
+ test_y0 (sample1.sampletests.test_one)
+ test_z1 (sample1.sampletests.test_one)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ Ran 32 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
and by test within the module using the --test (-t) option:
>>> sys.argv = 'test -u -vv -ssample1 -m_one -mtest1 -tx0 -ty0'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_y0 (sample1.sampletests.test1.TestA)
- test_x0 (sample1.sampletests.test1.TestB)
- test_x0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_x0 (sample1.sampletests.test_one.TestB)
- test_x0 (sample1.sampletests.test_one)
- test_y0 (sample1.sampletests.test_one)
- Ran 8 tests with 0 failures and 0 errors in 0.003 seconds.
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_x0 (sample1.sampletests.test1.TestB)
+ test_x0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_x0 (sample1.sampletests.test_one.TestB)
+ test_x0 (sample1.sampletests.test_one)
+ test_y0 (sample1.sampletests.test_one)
+ Ran 8 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
>>> sys.argv = 'test -u -vv -ssample1 -ttxt'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- testrunner-ex/sample1/../sampletests.txt
- testrunner-ex/sample1/sample11/../../sampletests.txt
- testrunner-ex/sample1/sample13/../../sampletests.txt
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- Ran 20 tests with 0 failures and 0 errors in 0.004 seconds.
+ testrunner-ex/sample1/../sampletests.txt
+ testrunner-ex/sample1/sample11/../../sampletests.txt
+ testrunner-ex/sample1/sample13/../../sampletests.txt
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ Ran 20 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
The --module and --test options take regular expressions. If the
regular expressions specified begin with '!', then tests that don't
match the regular expression are selected:
@@ -262,111 +276,122 @@
>>> sys.argv = 'test -u -vv -ssample1 -m!sample1[.]sample1'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_x1 (sample1.sampletestsf.TestA)
- test_y0 (sample1.sampletestsf.TestA)
- test_z0 (sample1.sampletestsf.TestA)
- test_x0 (sample1.sampletestsf.TestB)
- test_y1 (sample1.sampletestsf.TestB)
- test_z0 (sample1.sampletestsf.TestB)
- test_1 (sample1.sampletestsf.TestNotMuch)
- test_2 (sample1.sampletestsf.TestNotMuch)
- test_3 (sample1.sampletestsf.TestNotMuch)
- test_x0 (sample1.sampletestsf)
- test_y0 (sample1.sampletestsf)
- test_z1 (sample1.sampletestsf)
- testrunner-ex/sample1/../sampletests.txt
- test_x1 (sample1.sampletests.test1.TestA)
- test_y0 (sample1.sampletests.test1.TestA)
- test_z0 (sample1.sampletests.test1.TestA)
- test_x0 (sample1.sampletests.test1.TestB)
- test_y1 (sample1.sampletests.test1.TestB)
- test_z0 (sample1.sampletests.test1.TestB)
- test_1 (sample1.sampletests.test1.TestNotMuch)
- test_2 (sample1.sampletests.test1.TestNotMuch)
- test_3 (sample1.sampletests.test1.TestNotMuch)
- test_x0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test1)
- test_z1 (sample1.sampletests.test1)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- test_x1 (sample1.sampletests.test_one.TestA)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_z0 (sample1.sampletests.test_one.TestA)
- test_x0 (sample1.sampletests.test_one.TestB)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_z0 (sample1.sampletests.test_one.TestB)
- test_1 (sample1.sampletests.test_one.TestNotMuch)
- test_2 (sample1.sampletests.test_one.TestNotMuch)
- test_3 (sample1.sampletests.test_one.TestNotMuch)
- test_x0 (sample1.sampletests.test_one)
- test_y0 (sample1.sampletests.test_one)
- test_z1 (sample1.sampletests.test_one)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- Ran 48 tests with 0 failures and 0 errors in 0.017 seconds.
+ test_x1 (sample1.sampletestsf.TestA)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_z0 (sample1.sampletestsf.TestA)
+ test_x0 (sample1.sampletestsf.TestB)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_z0 (sample1.sampletestsf.TestB)
+ test_1 (sample1.sampletestsf.TestNotMuch)
+ test_2 (sample1.sampletestsf.TestNotMuch)
+ test_3 (sample1.sampletestsf.TestNotMuch)
+ test_x0 (sample1.sampletestsf)
+ test_y0 (sample1.sampletestsf)
+ test_z1 (sample1.sampletestsf)
+ testrunner-ex/sample1/../sampletests.txt
+ test_x1 (sample1.sampletests.test1.TestA)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_z0 (sample1.sampletests.test1.TestA)
+ test_x0 (sample1.sampletests.test1.TestB)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_z0 (sample1.sampletests.test1.TestB)
+ test_1 (sample1.sampletests.test1.TestNotMuch)
+ test_2 (sample1.sampletests.test1.TestNotMuch)
+ test_3 (sample1.sampletests.test1.TestNotMuch)
+ test_x0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test1)
+ test_z1 (sample1.sampletests.test1)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ test_x1 (sample1.sampletests.test_one.TestA)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_z0 (sample1.sampletests.test_one.TestA)
+ test_x0 (sample1.sampletests.test_one.TestB)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_z0 (sample1.sampletests.test_one.TestB)
+ test_1 (sample1.sampletests.test_one.TestNotMuch)
+ test_2 (sample1.sampletests.test_one.TestNotMuch)
+ test_3 (sample1.sampletests.test_one.TestNotMuch)
+ test_x0 (sample1.sampletests.test_one)
+ test_y0 (sample1.sampletests.test_one)
+ test_z1 (sample1.sampletests.test_one)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ Ran 48 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
Module and test filters can also be given as positional arguments:
>>> sys.argv = 'test -u -vv -ssample1 !sample1[.]sample1'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_x1 (sample1.sampletestsf.TestA)
- test_y0 (sample1.sampletestsf.TestA)
- test_z0 (sample1.sampletestsf.TestA)
- test_x0 (sample1.sampletestsf.TestB)
- test_y1 (sample1.sampletestsf.TestB)
- test_z0 (sample1.sampletestsf.TestB)
- test_1 (sample1.sampletestsf.TestNotMuch)
- test_2 (sample1.sampletestsf.TestNotMuch)
- test_3 (sample1.sampletestsf.TestNotMuch)
- test_x0 (sample1.sampletestsf)
- test_y0 (sample1.sampletestsf)
- test_z1 (sample1.sampletestsf)
- testrunner-ex/sample1/../sampletests.txt
- test_x1 (sample1.sampletests.test1.TestA)
- test_y0 (sample1.sampletests.test1.TestA)
- test_z0 (sample1.sampletests.test1.TestA)
- test_x0 (sample1.sampletests.test1.TestB)
- test_y1 (sample1.sampletests.test1.TestB)
- test_z0 (sample1.sampletests.test1.TestB)
- test_1 (sample1.sampletests.test1.TestNotMuch)
- test_2 (sample1.sampletests.test1.TestNotMuch)
- test_3 (sample1.sampletests.test1.TestNotMuch)
- test_x0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test1)
- test_z1 (sample1.sampletests.test1)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- test_x1 (sample1.sampletests.test_one.TestA)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_z0 (sample1.sampletests.test_one.TestA)
- test_x0 (sample1.sampletests.test_one.TestB)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_z0 (sample1.sampletests.test_one.TestB)
- test_1 (sample1.sampletests.test_one.TestNotMuch)
- test_2 (sample1.sampletests.test_one.TestNotMuch)
- test_3 (sample1.sampletests.test_one.TestNotMuch)
- test_x0 (sample1.sampletests.test_one)
- test_y0 (sample1.sampletests.test_one)
- test_z1 (sample1.sampletests.test_one)
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- Ran 48 tests with 0 failures and 0 errors in 0.017 seconds.
+ test_x1 (sample1.sampletestsf.TestA)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_z0 (sample1.sampletestsf.TestA)
+ test_x0 (sample1.sampletestsf.TestB)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_z0 (sample1.sampletestsf.TestB)
+ test_1 (sample1.sampletestsf.TestNotMuch)
+ test_2 (sample1.sampletestsf.TestNotMuch)
+ test_3 (sample1.sampletestsf.TestNotMuch)
+ test_x0 (sample1.sampletestsf)
+ test_y0 (sample1.sampletestsf)
+ test_z1 (sample1.sampletestsf)
+ testrunner-ex/sample1/../sampletests.txt
+ test_x1 (sample1.sampletests.test1.TestA)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_z0 (sample1.sampletests.test1.TestA)
+ test_x0 (sample1.sampletests.test1.TestB)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_z0 (sample1.sampletests.test1.TestB)
+ test_1 (sample1.sampletests.test1.TestNotMuch)
+ test_2 (sample1.sampletests.test1.TestNotMuch)
+ test_3 (sample1.sampletests.test1.TestNotMuch)
+ test_x0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test1)
+ test_z1 (sample1.sampletests.test1)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ test_x1 (sample1.sampletests.test_one.TestA)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_z0 (sample1.sampletests.test_one.TestA)
+ test_x0 (sample1.sampletests.test_one.TestB)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_z0 (sample1.sampletests.test_one.TestB)
+ test_1 (sample1.sampletests.test_one.TestNotMuch)
+ test_2 (sample1.sampletests.test_one.TestNotMuch)
+ test_3 (sample1.sampletests.test_one.TestNotMuch)
+ test_x0 (sample1.sampletests.test_one)
+ test_y0 (sample1.sampletests.test_one)
+ test_z1 (sample1.sampletests.test_one)
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ Ran 48 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
>>> sys.argv = 'test -u -vv -ssample1 . txt'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- testrunner-ex/sample1/../sampletests.txt
- testrunner-ex/sample1/sample11/../../sampletests.txt
- testrunner-ex/sample1/sample13/../../sampletests.txt
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- testrunner-ex/sample1/sampletests/../../sampletests.txt
- Ran 20 tests with 0 failures and 0 errors in 0.004 seconds.
+ testrunner-ex/sample1/../sampletests.txt
+ testrunner-ex/sample1/sample11/../../sampletests.txt
+ testrunner-ex/sample1/sample13/../../sampletests.txt
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ testrunner-ex/sample1/sampletests/../../sampletests.txt
+ Ran 20 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
Sometimes, There are tests that you don't want to run by default.
@@ -380,45 +405,48 @@
>>> sys.argv = 'test -u -vv -t test_y1 -t test_y0'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_y0 (sampletestsf.TestA)
- test_y1 (sampletestsf.TestB)
- test_y0 (sampletestsf)
- test_y0 (sample1.sampletestsf.TestA)
- test_y1 (sample1.sampletestsf.TestB)
- test_y0 (sample1.sampletestsf)
- test_y0 (sample1.sample11.sampletests.TestA)
- test_y1 (sample1.sample11.sampletests.TestB)
- test_y0 (sample1.sample11.sampletests)
- test_y0 (sample1.sample13.sampletests.TestA)
- test_y1 (sample1.sample13.sampletests.TestB)
- test_y0 (sample1.sample13.sampletests)
- test_y0 (sample1.sampletests.test1.TestA)
- test_y1 (sample1.sampletests.test1.TestB)
- test_y0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_y0 (sample1.sampletests.test_one)
- test_y0 (sample2.sample21.sampletests.TestA)
- test_y1 (sample2.sample21.sampletests.TestB)
- test_y0 (sample2.sample21.sampletests)
- test_y0 (sample2.sampletests.test_1.TestA)
- test_y1 (sample2.sampletests.test_1.TestB)
- test_y0 (sample2.sampletests.test_1)
- test_y0 (sample2.sampletests.testone.TestA)
- test_y1 (sample2.sampletests.testone.TestB)
- test_y0 (sample2.sampletests.testone)
- test_y0 (sample3.sampletests.TestA)
- test_y1 (sample3.sampletests.TestB)
- test_y0 (sample3.sampletests)
- test_y0 (sampletests.test1.TestA)
- test_y1 (sampletests.test1.TestB)
- test_y0 (sampletests.test1)
- test_y0 (sampletests.test_one.TestA)
- test_y1 (sampletests.test_one.TestB)
- test_y0 (sampletests.test_one)
- Ran 36 tests with 0 failures and 0 errors in 0.009 seconds.
+ test_y0 (sampletestsf.TestA)
+ test_y1 (sampletestsf.TestB)
+ test_y0 (sampletestsf)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_y0 (sample1.sampletestsf)
+ test_y0 (sample1.sample11.sampletests.TestA)
+ test_y1 (sample1.sample11.sampletests.TestB)
+ test_y0 (sample1.sample11.sampletests)
+ test_y0 (sample1.sample13.sampletests.TestA)
+ test_y1 (sample1.sample13.sampletests.TestB)
+ test_y0 (sample1.sample13.sampletests)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_y0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_y0 (sample1.sampletests.test_one)
+ test_y0 (sample2.sample21.sampletests.TestA)
+ test_y1 (sample2.sample21.sampletests.TestB)
+ test_y0 (sample2.sample21.sampletests)
+ test_y0 (sample2.sampletests.test_1.TestA)
+ test_y1 (sample2.sampletests.test_1.TestB)
+ test_y0 (sample2.sampletests.test_1)
+ test_y0 (sample2.sampletests.testone.TestA)
+ test_y1 (sample2.sampletests.testone.TestB)
+ test_y0 (sample2.sampletests.testone)
+ test_y0 (sample3.sampletests.TestA)
+ test_y1 (sample3.sampletests.TestB)
+ test_y0 (sample3.sampletests)
+ test_y0 (sampletests.test1.TestA)
+ test_y1 (sampletests.test1.TestB)
+ test_y0 (sampletests.test1)
+ test_y0 (sampletests.test_one.TestA)
+ test_y1 (sampletests.test_one.TestB)
+ test_y0 (sampletests.test_one)
+ Ran 36 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
@@ -428,96 +456,103 @@
>>> sys.argv = 'test -u -vv -a 2 -t test_y1 -t test_y0'.split()
>>> testrunner.run(defaults)
Running tests at level 2
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_y0 (sampletestsf.TestA)
- test_y0 (sampletestsf.TestA2)
- test_y1 (sampletestsf.TestB)
- test_y0 (sampletestsf)
- test_y0 (sample1.sampletestsf.TestA)
- test_y1 (sample1.sampletestsf.TestB)
- test_y0 (sample1.sampletestsf)
- test_y0 (sample1.sample11.sampletests.TestA)
- test_y1 (sample1.sample11.sampletests.TestB)
- test_y1 (sample1.sample11.sampletests.TestB2)
- test_y0 (sample1.sample11.sampletests)
- test_y0 (sample1.sample13.sampletests.TestA)
- test_y1 (sample1.sample13.sampletests.TestB)
- test_y0 (sample1.sample13.sampletests)
- test_y0 (sample1.sampletests.test1.TestA)
- test_y1 (sample1.sampletests.test1.TestB)
- test_y0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_y0 (sample1.sampletests.test_one)
- test_y0 (sample2.sample21.sampletests.TestA)
- test_y1 (sample2.sample21.sampletests.TestB)
- test_y0 (sample2.sample21.sampletests)
- test_y0 (sample2.sampletests.test_1.TestA)
- test_y1 (sample2.sampletests.test_1.TestB)
- test_y0 (sample2.sampletests.test_1)
- test_y0 (sample2.sampletests.testone.TestA)
- test_y1 (sample2.sampletests.testone.TestB)
- test_y0 (sample2.sampletests.testone)
- test_y0 (sample3.sampletests.TestA)
- test_y1 (sample3.sampletests.TestB)
- test_y0 (sample3.sampletests)
- test_y0 (sampletests.test1.TestA)
- test_y1 (sampletests.test1.TestB)
- test_y0 (sampletests.test1)
- test_y0 (sampletests.test_one.TestA)
- test_y1 (sampletests.test_one.TestB)
- test_y0 (sampletests.test_one)
- Ran 38 tests with 0 failures and 0 errors in 0.009 seconds.
+ test_y0 (sampletestsf.TestA)
+ test_y0 (sampletestsf.TestA2)
+ test_y1 (sampletestsf.TestB)
+ test_y0 (sampletestsf)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_y0 (sample1.sampletestsf)
+ test_y0 (sample1.sample11.sampletests.TestA)
+ test_y1 (sample1.sample11.sampletests.TestB)
+ test_y1 (sample1.sample11.sampletests.TestB2)
+ test_y0 (sample1.sample11.sampletests)
+ test_y0 (sample1.sample13.sampletests.TestA)
+ test_y1 (sample1.sample13.sampletests.TestB)
+ test_y0 (sample1.sample13.sampletests)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_y0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_y0 (sample1.sampletests.test_one)
+ test_y0 (sample2.sample21.sampletests.TestA)
+ test_y1 (sample2.sample21.sampletests.TestB)
+ test_y0 (sample2.sample21.sampletests)
+ test_y0 (sample2.sampletests.test_1.TestA)
+ test_y1 (sample2.sampletests.test_1.TestB)
+ test_y0 (sample2.sampletests.test_1)
+ test_y0 (sample2.sampletests.testone.TestA)
+ test_y1 (sample2.sampletests.testone.TestB)
+ test_y0 (sample2.sampletests.testone)
+ test_y0 (sample3.sampletests.TestA)
+ test_y1 (sample3.sampletests.TestB)
+ test_y0 (sample3.sampletests)
+ test_y0 (sampletests.test1.TestA)
+ test_y1 (sampletests.test1.TestB)
+ test_y0 (sampletests.test1)
+ test_y0 (sampletests.test_one.TestA)
+ test_y1 (sampletests.test_one.TestB)
+ test_y0 (sampletests.test_one)
+ Ran 38 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
We can use the --all option to run tests at all levels:
>>> sys.argv = 'test -u -vv --all -t test_y1 -t test_y0'.split()
>>> testrunner.run(defaults)
Running tests at all levels
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test_y0 (sampletestsf.TestA)
- test_y0 (sampletestsf.TestA2)
- test_y1 (sampletestsf.TestB)
- test_y0 (sampletestsf)
- test_y0 (sample1.sampletestsf.TestA)
- test_y1 (sample1.sampletestsf.TestB)
- test_y0 (sample1.sampletestsf)
- test_y0 (sample1.sample11.sampletests.TestA)
- test_y0 (sample1.sample11.sampletests.TestA3)
- test_y1 (sample1.sample11.sampletests.TestB)
- test_y1 (sample1.sample11.sampletests.TestB2)
- test_y0 (sample1.sample11.sampletests)
- test_y0 (sample1.sample13.sampletests.TestA)
- test_y1 (sample1.sample13.sampletests.TestB)
- test_y0 (sample1.sample13.sampletests)
- test_y0 (sample1.sampletests.test1.TestA)
- test_y1 (sample1.sampletests.test1.TestB)
- test_y0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_y1 (sample1.sampletests.test_one.TestB)
- test_y0 (sample1.sampletests.test_one)
- test_y0 (sample2.sample21.sampletests.TestA)
- test_y1 (sample2.sample21.sampletests.TestB)
- test_y0 (sample2.sample21.sampletests)
- test_y0 (sample2.sampletests.test_1.TestA)
- test_y1 (sample2.sampletests.test_1.TestB)
- test_y0 (sample2.sampletests.test_1)
- test_y0 (sample2.sampletests.testone.TestA)
- test_y1 (sample2.sampletests.testone.TestB)
- test_y0 (sample2.sampletests.testone)
- test_y0 (sample3.sampletests.TestA)
- test_y1 (sample3.sampletests.TestB)
- test_y0 (sample3.sampletests)
- test_y0 (sampletests.test1.TestA)
- test_y1 (sampletests.test1.TestB)
- test_y0 (sampletests.test1)
- test_y0 (sampletests.test_one.TestA)
- test_y1 (sampletests.test_one.TestB)
- test_y0 (sampletests.test_one)
- Ran 39 tests with 0 failures and 0 errors in 0.009 seconds.
+ test_y0 (sampletestsf.TestA)
+ test_y0 (sampletestsf.TestA2)
+ test_y1 (sampletestsf.TestB)
+ test_y0 (sampletestsf)
+ test_y0 (sample1.sampletestsf.TestA)
+ test_y1 (sample1.sampletestsf.TestB)
+ test_y0 (sample1.sampletestsf)
+ test_y0 (sample1.sample11.sampletests.TestA)
+ test_y0 (sample1.sample11.sampletests.TestA3)
+ test_y1 (sample1.sample11.sampletests.TestB)
+ test_y1 (sample1.sample11.sampletests.TestB2)
+ test_y0 (sample1.sample11.sampletests)
+ test_y0 (sample1.sample13.sampletests.TestA)
+ test_y1 (sample1.sample13.sampletests.TestB)
+ test_y0 (sample1.sample13.sampletests)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_y1 (sample1.sampletests.test1.TestB)
+ test_y0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_y1 (sample1.sampletests.test_one.TestB)
+ test_y0 (sample1.sampletests.test_one)
+ test_y0 (sample2.sample21.sampletests.TestA)
+ test_y1 (sample2.sample21.sampletests.TestB)
+ test_y0 (sample2.sample21.sampletests)
+ test_y0 (sample2.sampletests.test_1.TestA)
+ test_y1 (sample2.sampletests.test_1.TestB)
+ test_y0 (sample2.sampletests.test_1)
+ test_y0 (sample2.sampletests.testone.TestA)
+ test_y1 (sample2.sampletests.testone.TestB)
+ test_y0 (sample2.sampletests.testone)
+ test_y0 (sample3.sampletests.TestA)
+ test_y1 (sample3.sampletests.TestB)
+ test_y0 (sample3.sampletests)
+ test_y0 (sampletests.test1.TestA)
+ test_y1 (sampletests.test1.TestB)
+ test_y0 (sampletests.test1)
+ test_y0 (sampletests.test_one.TestA)
+ test_y1 (sampletests.test_one.TestB)
+ test_y0 (sampletests.test_one)
+ Ran 39 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
@@ -530,18 +565,6 @@
>>> sys.argv = 'test --all -m sample1 -t test_y0 --list-tests'.split()
>>> testrunner.run(defaults)
- Listing unit tests:
- test_y0 (sample1.sampletestsf.TestA)
- test_y0 (sample1.sampletestsf)
- test_y0 (sample1.sample11.sampletests.TestA)
- test_y0 (sample1.sample11.sampletests.TestA3)
- test_y0 (sample1.sample11.sampletests)
- test_y0 (sample1.sample13.sampletests.TestA)
- test_y0 (sample1.sample13.sampletests)
- test_y0 (sample1.sampletests.test1.TestA)
- test_y0 (sample1.sampletests.test1)
- test_y0 (sample1.sampletests.test_one.TestA)
- test_y0 (sample1.sampletests.test_one)
Listing samplelayers.Layer11 tests:
test_y0 (sample1.sampletests.test11.TestA)
test_y0 (sample1.sampletests.test11)
@@ -560,5 +583,16 @@
Listing samplelayers.Layer122 tests:
test_y0 (sample1.sampletests.test122.TestA)
test_y0 (sample1.sampletests.test122)
+ Listing zope.testing.testrunner.layer.UnitTests tests:
+ test_y0 (sample1.sampletestsf.TestA)
+ test_y0 (sample1.sampletestsf)
+ test_y0 (sample1.sample11.sampletests.TestA)
+ test_y0 (sample1.sample11.sampletests.TestA3)
+ test_y0 (sample1.sample11.sampletests)
+ test_y0 (sample1.sample13.sampletests.TestA)
+ test_y0 (sample1.sample13.sampletests)
+ test_y0 (sample1.sampletests.test1.TestA)
+ test_y0 (sample1.sampletests.test1)
+ test_y0 (sample1.sampletests.test_one.TestA)
+ test_y0 (sample1.sampletests.test_one)
False
-
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-verbose.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-verbose.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-verbose.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -36,10 +36,13 @@
>>> sys.argv = 'test -uv'.split()
>>> testrunner.run(defaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
................................................................................................................................................................................................
Ran 192 tests with 0 failures and 0 errors in 0.035 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
If the --verbose (-v) option is used twice, then the name and location of
@@ -143,6 +146,9 @@
... ]
>>> sys.argv = 'test -q -u'.split()
>>> testrunner.run(defaults)
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Ran 192 tests with 0 failures and 0 errors in 0.034 seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
Modified: zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-wo-source.txt
===================================================================
--- zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-wo-source.txt 2008-05-04 22:00:01 UTC (rev 86427)
+++ zope.testing/branches/ctheune-cleanup/src/zope/testing/testrunner/testrunner-wo-source.txt 2008-05-04 22:01:43 UTC (rev 86428)
@@ -44,15 +44,19 @@
>>> sys.argv = ['test']
>>> testrunner.run(mydefaults)
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test1 (unlikely_package_name.compiletest.Test)
- test2 (unlikely_package_name.compiletest.Test)
- test1 (unlikely_package_name.package.compiletest.Test)
- test2 (unlikely_package_name.package.compiletest.Test)
+ test1 (unlikely_package_name.compiletest.Test)
+ test2 (unlikely_package_name.compiletest.Test)
+ test1 (unlikely_package_name.package.compiletest.Test)
+ test2 (unlikely_package_name.package.compiletest.Test)
Ran 4 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
If we delete the source files, it's normally a disaster: the test runner
doesn't believe any test files, or even packages, exist. Note that we pass
``--keepbytecode`` this time, because otherwise the test runner would
@@ -75,15 +79,19 @@
>>> testrunner.run(mydefaults, ["test", "--usecompiled"])
Running tests at level 1
- Running unit tests:
+ Running zope.testing.testrunner.layer.UnitTests tests:
+ Set up zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
Running:
- test1 (unlikely_package_name.compiletest.Test)
- test2 (unlikely_package_name.compiletest.Test)
- test1 (unlikely_package_name.package.compiletest.Test)
- test2 (unlikely_package_name.package.compiletest.Test)
+ test1 (unlikely_package_name.compiletest.Test)
+ test2 (unlikely_package_name.compiletest.Test)
+ test1 (unlikely_package_name.package.compiletest.Test)
+ test2 (unlikely_package_name.package.compiletest.Test)
Ran 4 tests with 0 failures and 0 errors in N.NNN seconds.
+ Tearing down left over layers:
+ Tear down zope.testing.testrunner.layer.UnitTests in N.NNN seconds.
False
+
Remove the temporary directory:
>>> shutil.rmtree(directory_with_tests)
More information about the Zope3-Checkins
mailing list