Zope 2.5.0 and python 2.2.0 on Suse 8.0
Hi, I have a server with Suse 8.0. The combination of Zope 2.5.0 and python 2.2.0 causes problems with the latest CMFPlone (see http://plone.org/collector/249 ) On my home server with Debian 3.0 (Zope 2.5.1 / python 2.1.3) I have no problems. What shall I do? Would you recommend to upgrade Zope to 2.5.1 and to downgrade python to 2.1.3? And what is the best way to do it on Suse? TIA juh -- Das Handwerk und sein goldener Boden http://www.sudelbuch.de/1999/19991105.html
----- Original Message ----- From: "Jan Ulrich Hasecke" <janulrich.hasecke@web.de> To: <zope@zope.org> Sent: Friday, August 23, 2002 11:14 Subject: [Zope] Zope 2.5.0 and python 2.2.0 on Suse 8.0
Hi,
I have a server with Suse 8.0.
The combination of Zope 2.5.0 and python 2.2.0 causes problems with the latest CMFPlone (see http://plone.org/collector/249 )
On my home server with Debian 3.0 (Zope 2.5.1 / python 2.1.3) I have no problems.
What shall I do?
Would you recommend to upgrade Zope to 2.5.1 and to downgrade python to 2.1.3?
This is the recommended and only officially supported combination. -aj
i think the following items have been discussed over and over on this list, but maybe they bear repeating: - user zope 2.5.1. it fixes some potential crashing bugs that 2.5.0 had. - do not use python 2.2 with zope. it is not officially supported. use 2.1. 3 jens On Friday, August 23, 2002, at 05:14 , Jan Ulrich Hasecke wrote:
Hi,
I have a server with Suse 8.0.
The combination of Zope 2.5.0 and python 2.2.0 causes problems with the latest CMFPlone (see http://plone.org/collector/249 )
On my home server with Debian 3.0 (Zope 2.5.1 / python 2.1.3) I have no problems.
What shall I do?
Would you recommend to upgrade Zope to 2.5.1 and to downgrade python to 2.1.3?
And what is the best way to do it on Suse?
TIA juh
We should add a check to z2.py that checks the version of the used Python interpreter against a list of supported Python versions and output a *detailed* warning. -aj ----- Original Message ----- From: "Jens Vagelpohl" <jens@zope.com> To: "Jan Ulrich Hasecke" <janulrich.hasecke@web.de> Cc: <zope@zope.org> Sent: Friday, August 23, 2002 14:11 Subject: Re: [Zope] Zope 2.5.0 and python 2.2.0 on Suse 8.0
i think the following items have been discussed over and over on this list, but maybe they bear repeating:
- user zope 2.5.1. it fixes some potential crashing bugs that 2.5.0 had.
- do not use python 2.2 with zope. it is not officially supported. use 2.1. 3
jens
On Friday, August 23, 2002, at 05:14 , Jan Ulrich Hasecke wrote:
Hi,
I have a server with Suse 8.0.
The combination of Zope 2.5.0 and python 2.2.0 causes problems with the latest CMFPlone (see http://plone.org/collector/249 )
On my home server with Debian 3.0 (Zope 2.5.1 / python 2.1.3) I have no problems.
What shall I do?
Would you recommend to upgrade Zope to 2.5.1 and to downgrade python to 2.1.3?
And what is the best way to do it on Suse?
TIA juh
_______________________________________________ Zope maillist - Zope@zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )
"Andreas Jung" <lists@andreas-jung.com> writes:
We should add a check to z2.py that checks the version of the used Python interpreter against a list of supported Python versions and output a *detailed* warning.
Pardon my ignorance. I am just a debian-user and never thought about dependencies. ;-) Perhaps it would be useful if a decent person from zope.com drops a message to Suse that their distribution is queer and not really usable. It is very strange. There are many cheap dedicated servers around her in germany which use Suse. I never heard about a cheap server with debian. But I installed it all by hand now. And it works. Many many thanks to Sven for his quick reply. Ciao! juh
Hello Jan,
I have a server with Suse 8.0.
The combination of Zope 2.5.0 and python 2.2.0 causes problems with the latest CMFPlone (see http://plone.org/collector/249 )
Allthough zope.org recomends Python-2.1.3 for zope-2.5.x, SuSE's Yast installs Zope-2.5.0 with Python-2.2.0. I wonder that Zope-2.5.x runs at all. Deinstalling Python-2.2.0 with Yast and manualy installing Python-2.1.3 from source or *.rpm isn't a solution since Yast will automatically "upgrade" to Python-2.2.0 again to resolve package dependencies the next time you install any package with Yast. You will have to install Python-2.1.3 manually to a different path with --prefix=/my/new/path. After this you have to start zope like this: /my/new/path/bin/python /path_to_zope_installation/z2.py
On my home server with Debian 3.0 (Zope 2.5.1 / python 2.1.3) I have no problems.
Because that's the recomended combination.
Would you recommend to upgrade Zope to 2.5.1 and to downgrade python to 2.1.3?
Definitely, because it's recomended on zope.org. You should also update to Zope-2.5.1, because of some important bugfixes in it.
And what is the best way to do it on Suse?
Personally, I prefer the following: (but most people wouldn't agree, I'm afraid) Don't use Yast for any zope installation, do it manually! First create a new user ("zpoeuser" for example). Of course you can use Yast for this step ;-) Then log in as "zopeuser". Type the following commands: mkdir local cd local mkdir bin sbin lib include etc man share info cd Now download the packages http://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz and http://www.zope.org/Products/Zope/2.5.1/Zope-2.5.1-src.tgz Unpack Python-2.1.3.tgz to a directory, enter it and type the following commands: ./configure --with-threads --prefix=/home/zopeuser/local make make install Note: You don't need to be root for "make install" since you install it to your home directory. Unpack Zope-2.5.1-src.tgz to a directory, enter it and type the following commands: ~/local/bin/python wo_pcgi.py Zope is now build with it's own webserver. Important: After the script has finished it tells you the admin password. Write it down! Open z2.py with your favorite editor, and make the necessary changes. Look at least for the following entrys: IP_ADDRESS='' Enter your ip-address here. HTTP_PORT= Enter the desired port here. Note: To run the webserver without root privilges you must enter a port number greater than 1024 (I believe) here. If you want to use the regular port number for web servers, enter 80 here. Also note: If you use port 80 you have to be root to start the server. Also also note: On SuSE-8.0 there is probably already apache running on this port, so zope wouldn't start on port 80. You have to stop apache first. For testing zope I recomend using an unprivileged port (8080 or 9090 for example). Save z2.py and type the following command: ~/local/bin/python z2.py -D (-D means write debugging information to the console) The zope server now trys to start. If the start fails it will write it's error messages to the console. Now start your browser and open http://IP_ADDRESS:HTTP_PORT (the ones you entered in z2.py) I everything went ok you can stop zope and restart it without -D. Zope is now started in the background, so you can close the console you started it from. Hope I was of any help Greetings Sven P.S. Sorry for my undebugged english. -- Sven Rudolph, Programmierer GermanMedicalServices.de GmbH Unter den Eichen 5, 65195 Wiesbaden Tel.: 06 11 / 97 46 25 2
participants (5)
-
Andreas Jung -
Andreas Jung -
Jan Ulrich Hasecke -
Jens Vagelpohl -
Sven Rudolph