March 2000 - Zope - Zope lists

DTML Mistotals
by Clint Shelby McCulloch 01 Mar '00

01 Mar '00

Hi: I've been using DTML successfully to generate around 20+ reports outside of zope itself. The result come back from the DB as a pdf document. The solution has worked well. It looks like there might possibly be a bug in the dtml totalling process, however, when dealing with larger numbers. The results on one report are accurate for a 20 row table with smaller totals (say, e.g., 51518), but the larger totals are incorrect (e.g., it reports a number say in the 300,000 range rather than 1,378,835). The DTML for that column (the TOTAL column) is:  Has anyone else seen this? The version of DTML I'm using is from the last quarter or so of last year. Any ideas?

2 3

Re: Zope digest, Vol 1 #656 - 58 msgs
by Nico Grubert 01 Mar '00

01 Mar '00

nehm ich alles ! ;-) also 55,- ??? ich schick morgen eine überweisung raus, okay ? brauche aber das gehäuse sehr dringend, da mein sampler mit dem laden von samplecds über den scsicontroller im pc nicht zurechtkommt. also...wie machen wir das mit der bezahlung ? nachnahme find ich immer schlecht, weils zu teuer ist...so bezahle ich eben nur 6.90 ...

2 1

ZPyGreSQLDA install problem
by Marc Gehling 01 Mar '00

01 Mar '00

Hello, I run "make -f Makefile.pre.in boot" and this is the output: ----- rm -f *.o *~ rm -f *.a tags TAGS config.c Makefile.pre python sedscript rm -f *.so *.sl so_locations VERSION=`python -c "import sys; print sys.version[:3]"`; \ installdir=`python -c "import sys; print sys.prefix"`; \ exec_installdir=`python -c "import sys; print sys.exec_prefix"`; \ make -f ./Makefile.pre.in VPATH=. srcdir=. \ VERSION=$VERSION \ installdir=$installdir \ exec_installdir=$exec_installdir \ Makefile make[1]: Entering directory `/usr/local/dc/Zope-2.1.4-linux2-x86/lib/python/Prod ucts/ZPyGreSQLDA/src' make[1]: *** No rule to make target `/usr/lib/python1.5/config/Makefile', needed by `sedscript'. Stop. make[1]: Leaving directory `/usr/local/dc/Zope-2.1.4-linux2-x86/lib/python/Produ cts/ZPyGreSQLDA/src' make: *** [boot] Error 2 ---

1 0

RE: [Zope] Listening on specific interfaces
by Pearson, Brian Edward (GEA, 056278) 01 Mar '00

01 Mar '00

> I want to be able to have Zope listen to a specific network interface, i.e. > - a virtual IP address that has been created on the server. This will allow > me to have multiple Zope sites running on the same machine. How can this be > accomplished? Any/all suggestions are greatly appreciated. >> You could run Zopes behind an Apache server and connect via ProxyPass or >> FastCGI. This would even allow virtual servers on one IP address. Frank, I agree, however I probably should have been more specific. I would like to be able to do this using ZServer rather than using Apache or in my case Netscape Enterprise Server. Do you know if ZServer supports this? Thanks again, -Brian > -----Original Message----- > From: Frank Tegtmeyer [SMTP:fte@d.de.mqi.net] > Sent: Wednesday, March 01, 2000 12:08 PM > To: zope(a)zope.org > Subject: Re: [Zope] Listening on specific interfaces > > > I want to be able to have Zope listen to a specific network interface, > i.e. > > - a virtual IP address that has been created on the server. This will > allow > > me to have multiple Zope sites running on the same machine. How can > this be > > accomplished? Any/all suggestions are greatly appreciated. > > You could run Zopes behind an Apache server and connect via ProxyPass or > FastCGI. This would even allow virtual servers on one IP address. > > Regards, Frank > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Re: [Zope] ZODB & large files
by Tres Seaver 01 Mar '00

01 Mar '00

ethan mindlace fremen <mindlace(a)imeme.net> wrote: > > Zopistas, > > I'm setting up zope on a linux box with support for large files. > (>2gb). I need to make sure that the ZODB will continue to work > properly past this point. Is the filesystem stuff the ZODB does handled > by python or ZODB? > > If the answer is ZODB, where can I look for fs calls to make sure > they're 64 bit? The ZODB uses a "pluggable" Storage-derived object to do the actual reads/writes (this is where Ty Sarna's BSDDB Storage gets plugged in). The "standard" Storage is the FileStorage, defined in $ZOPE_HOME/lib/python/ZODB/FileStorage.py. -- ========================================================= Tres Seaver tseaver(a)palladion.com 713-523-6582 Palladion Software http://www.palladion.com

1 0

bobobase_modification_time syntax
by Timothy Wilson 01 Mar '00

01 Mar '00

Hi everyone, I've grepped through the source and consulted the ZQR, but I still haven't figured out how to use bobobase_modification_time. I've got a directory with a file object, and I'd like index_html to display when that file object was last modified. I've tried all manner of syntax combinations, but I can't get it to refer to the modification time of a given object and not just the modification time of index_html. Suggestions? -Tim -- Tim Wilson | Visit Sibley online: | Check out: Henry Sibley HS | http://www.isd197.k12.mn.us/ | http://www.zope.org/ W. St. Paul, MN | | http://slashdot.org/ wilson(a)visi.com | <dtml-var pithy_quote> | http://linux.com/

1 0

Re: [Zope] I got it!
by Tres Seaver 01 Mar '00

01 Mar '00

glyph(a)twistedmatrix.com wrote: > > On 29 Feb, I wrote: > > > Okay. Perhaps someone else on the list can answer this one then: I > > have a standard Debian install of Zope. ZServer works fine. Apache > > works fine. Zope shows up fine in apache. Except... I can't log in. > > At all. With any username. What do I have to do to get Apache to > > recognize Zope's authentication? > > Just to follow up to myself so you know: I have seen snippets about > RewriteRules all over the place for using Apache with Zope... > > I have tried everything i've found, and nothing has worked so far. > (The RewriteRules appear to do nothing at all...) If you want to stick with Basic HTTP Authentication, the key is to persuade Apache to pass that info through. On my setup, this involves adding the following to the "RewriteRule" line: [e=HTTP_CGI_AUTHORIZATION:%1,t=application/x-httpd-cgi,l] Also, the "RewriteCond %{HTTP:Authorization} ^(.*)" line has to be repeated before *each* rule to which you want it to apply. -- ========================================================= Tres Seaver tseaver(a)palladion.com 713-523-6582 Palladion Software http://www.palladion.com

1 0

Dates
by Joshua Brauer 01 Mar '00

01 Mar '00

I've got a calendar setup that displays three calendars, last month, this month and next month.... currently I use this call: <dtml-call "REQUEST.set('date-nextMonth', '2000-4-1')"> I've never had success at automatically setting the date as one month from now... Anybody know how to do this? Josh ------------------------------------------------- Joshua Brauer Computer Support Scientist Department of Biochemistry and Molecular Biology Colorado State University Fort Collins, CO 80523 (970) 491-1080 ------------------------------------------------- Fax or Voice mail toll free 888-392-4832, ext. 291-345-5142 ------------------------------------------------- Direct Fax (419) 793-4120 -------------------------------------------------

1 0

strange blockings
by Tino Wildenhain 01 Mar '00

01 Mar '00

Hello there, we got a site up and running (its actually a shop solution based on zope). Platform is NT, zope version is 2.1.4. Most of the time, the site is running very fast. But some times it hangs. It does not use much processor-time at this moment (arount 14%) but it does not process any requests for some seconds. Its very annoying. Does anyone know how to avoid such behavior? tia Tino Wildenhain

2 2

ODBC + Zope + UNIX
by Andrew Kenneth Milton 01 Mar '00

01 Mar '00

What is required to get ODBC under UNIX functioning using e.g. the iODBC drivers? Is it just a matter of pulling down the winODBC driver and making it work, or is there some devil magic required (i.e. do I have to commit weeks, rather than days to it). I do have a black robe, plenty of chickens, and a goat. -- Totally Holistic Enterprises Internet| P:+61 7 3870 0066 | Andrew Milton The Internet (Aust) Pty Ltd | F:+61 7 3870 4477 | ACN: 082 081 472 | M:+61 416 022 411 | Carpe Daemon PO Box 837 Indooroopilly QLD 4068 |akm(a)theinternet.com.au|

2 1