Zope September 2001

zope@zope.dev

410 participants
797 discussions

Using FTP to connect to Zope server from (g)VIM
by Phil Harris 25 Mar '02

25 Mar '02

Hi all, My intellect was piqued recently by a discussion on the list about editors for Zope etc. I remember some people saynig that VIM was good, to which my response was, 'Yeah but there's no FTP built in'. Someone then responded with a few scripts to do it. Well I thought they were a bit cumbersome, so I wrote my own. ftpopen.py and ftpsave.py. If you have a VIM executable with Python support built in then these run from within VIM and allow you to open/save file from/to Zope seamlessly. (I have them on a menu in GVIM for instance) I'll put the files up on my Zope Members bit (http://www.zope.org/Members/philh) along with a few instructions. If anybody can think of any enhancements then please let me know and I'll see if I can work them in. I hope these will be useful to someone. See ya Phil phil.harris(a)zope.co.uk

3 2

RE: [Zope] Unable to manage/edit Zope
by Dunigan, Craig 16 Jan '02

16 Jan '02

It's very strange that one machine with IE5.0 works and one doesn't. Anyone else heard of something like this? As for the sluggishness, IE just gets fatter every time they rev it. But, so does Netscape for that matter. You probably need more RAM. Craig Dunigan Web Programmer Esker Software - Extending the Reach of Information mailto:craig.dunigan@esker.com Ph. 608.273.6000 Fax 608.273.8227 http://www.esker.com > -----Original Message----- > From: Mark Snellings [mailto:msnellings@stellarcomms.com] > Sent: Thursday, June 21, 2001 1:26 PM > To: Dunigan, Craig > Subject: RE: [Zope] Unable to manage/edit Zope > > > I thought that might be the case, so I did the upgrade yesterday, and > surprisingly my system was VERY sluggish. Like I was working on a 486 > machine again. For that reason I uninstalled it. > > Both machines are running IE version 5.00.3103.100 based on > the Windows 2000 > SP1 install. > > Why would one machine work and not the other? > > Thanks > Mark > > -----Original Message----- > From: Dunigan, Craig [mailto:craig.dunigan@esker.com] > Sent: Thursday, June 21, 2001 2:19 PM > To: 'msnellings(a)stellarcomms.com' > Subject: RE: [Zope] Unable to manage/edit Zope > > > Mark, > > This is a known bug in older versions of IE. Upgrade to v5.5 > and all will > be well. > > Craig Dunigan > Web Programmer > Esker Software - Extending the Reach of Information > mailto:craig.dunigan@esker.com > Ph. 608.273.6000 > Fax 608.273.8227 > http://www.esker.com > > > -----Original Message----- > > From: Mark Snellings [mailto:msnellings@stellarcomms.com] > > Sent: Thursday, June 21, 2001 1:04 PM > > To: zope(a)zope.org > > Subject: [Zope] Unable to manage/edit Zope > > > > > > I have Zope installed on two development systems in my > office. On the > > second system when I go to "manage it" > > http://192.168.0.1:8080/manage, I get > > the frame on the left frame which shows the root folder and > > what's in it, > > but the main frame just shows me the "view" of "Zope Quick > > Start" instead of > > the contents of the root folder. I am unable to "edit" it. > > If I attempt to > > manage it from another computer in the office, everything > > comes up fine. > > > > Also, when I use this second computer to "manage" the Zope > > installed on the > > first computer, I have the same thing. It appears to me > > that it related to > > my IE browser, but I cannot figure it out. > > > > Any ideas? > > > > Thanks > > Mark > > > > > > > > _______________________________________________ > > Zope maillist - Zope(a)zope.org > > http://lists.zope.org/mailman/listinfo/zope > > ** No cross posts or HTML encoding! ** > > (Related lists - > > http://lists.zope.org/mailman/listinfo/zope-announce > > http://lists.zope.org/mailman/listinfo/zope-dev ) > > >

7 14

Aiieee!?!
by Chris Withers 10 Oct '01

10 Oct '01

What on earth does this mean? 2001-09-20T10:06:58 ERROR(200) zdaemon zdaemon: Thu Sep 20 11:06:58 2001: Aiieee! 528 exited with error code: 11 cheers, Chris

4 4

Updating Squishdot
by T. H. Nguyen 09 Oct '01

09 Oct '01

Hello! Hope anyone can tell me how I can update a Squishdot 0.3.2 (!) Site to 1.0.0 or 1.3.0 . If I follow the steps for updating described at http://www.squishdot.org/Documentation/upgrades.html then I would need to update... from 0.3.2 to 0.4.0 then from 0.4.0 to 0.4.1 then from 0.4.1 (directly) to 0.7.x then finaly from 0.7.x to 1.0.0. I would need the Version 0.4.0, 0.4.1, 0.7.x from Squisdot, don't I? But they no more on that Site! Could you please help me out? Thanx in advance Tran Huy Nguyen

3 2

Preventing download of Document object
by Simon Blandford 06 Oct '01

06 Oct '01

Hi, I am customising a product (Document Library). Normally, when you select the URL of one of the Document objects the contents of the document (msword, pdf file etc) is downloaded by the web browser. I want to be able to limit access to the document so that, say, an anomynous user can view... www.myzopesite.org/doclib/Documents/doc/show_extract ....but not... www.myzopesite.org/doclib/Documents/doc ...where doc is an object of the Document class in question. I can use __ac_permissions__ to authorize what methods can/can't be accessed in the Document class but how do I enable certain methods whilst barring access to the file contents of the document itself? Regards, Simon B.

3 7

RE: [Zope] how to call an external module from a Python script?
by Reif Peter 05 Oct '01

05 Oct '01

> From: Dieter Maurer *EXTERN* [mailto:dieter@handshake.de] > > > And how do I call a DTML-variable (object?) defined with > <dtml-let var=...> > > from my script? > > context.var, container.var, script.var don't work. > You bind the "namespace". > This binding is there for precisely this aim.... > >From the Zope Book (Chapter 8, binding variables): > Namespace > ... If your script is calles from a DTML Method, and you have > chosen a name for this binding, then the named variable contains the > DTML namespace ... > > ... these bindings are listed in comments at the top of your script files: > > ... > ##bind namespace= > ... > > You can change your script's bindings by changing these comments... My script: ... ##bind namespace=namespace ... zone = namespace.zone return zone It is called from a DTML-method where the tag <dtml-var zone> is rendered correctly: ... <dtml-var get_status_a> ... Error: Zope Error Zope has encountered an error while publishing this resource. Error Type: AttributeError Error Value: zone

3 2

roxen with zope
by Justin Heesemann 05 Oct '01

05 Oct '01

Hi... on my way testing roxen i was wondering how i could use zope + virtualhostmonster with it. I was using apache with a rewrite rule RewriteRule ^/(.*) http://localhost:8080/VirtualHostBase/http/www.test.com:80/test.com/Virtual… [P] and i tried to do the same thing in roxen, adding the http relay module to a site and set a relay pattern: MATCH ^/(.*) CALL http://localhost:8080/VirtualHostBase/http/www.test.com:80/test.com/Virtual… which should to the same in my opinion. Well.. it doesn't. Pointing my browser to www.test.com i'll end up with getting nothing, the browser trying all the time to open something but it never gets an answer. roxen says, it got a request which matched the regex ^/(.*) but it doesn't seem to successfully connect to zope. Any suggestions ? Best Regards, Justin

6 20

Web stats
by Fritz Mesedilla 05 Oct '01

05 Oct '01

Greetings! I hope you can help me with this. This is for our marketing team. How do you get the webstats for a clustered server architecture? It's like this, we have Apache running as front-end for Zope. These are identical servers being load balanced. I thought for the easiest way, multiply the stats of one server by the total number of servers since they are load balanced. I laughed, they didn't. I guess they didn't understand it. :) Anyway, someone suggested using cluster trends. But that means opening an ftp port on every clustered server which means insecurity. Is there another way? Has anyone created their own stats script for apache or similar webservers? Something like hitbox? We used webalizer before. But since the load balancing, I cannot accurately get the stats for the websites. Please advice me on what to do with the dilemma of the marketing team. No, I can't make them resign. They bring in the bucks. Thanks. Hoping for anyone's response. Cheers, Fritz Mesedilla www.mesedilla.com --- +Basta Ikaw Lord

2 1

CST and disappearing variables
by Ron Bickers 03 Oct '01

03 Oct '01

I'm running into what appears to be the same problem brought up by others several months ago regarding "random" disappearing of session variables under CoreSessionTracking. After combing through the archives, there didn't appear to be any definitive answer for the problems. I *think* my setup is fairly basic, but I can't figure out how to consistently reproduce the problem. In fact, *I* haven't been able to make it happen at all, but every 1-2 out of 10 orders ends up with an empty cart, and the customer clearly remembers their cart was not empty. I'm not using ZEO or anything fancy, just the RAM-based storage and cookies. I have the following setup for adding, updating, and viewing the cart: Python Script 'add': 'item' is a dictionary that is populated with simple numbers and strings. 'cart' is an array of 'items' and is stored like this: session = context.SDM.getSessionData() cart = session.get('cart', []) cart.append(item) session.set('cart', cart) Python Script 'update': A form passes in 'remove' as the cart index of the item to be removed: session = context.SDM.getSessionData() cart = session.get('cart', []) remove = REQUEST.form.get('remove', None) if remove is not None: del cart[remove] session.set('cart', cart) To place the items in a mail message for sending the order, I use the following simple Python Script and loop over it with dtml-in: session = context.SDM.getSessionData() return session.get('cart', []) This seems so simple, but seemingly randomly the above script returns [] instead of what is in the cart. There is another session variable (a dictionary 'custinfo') that is populated towards the end of the user's ordering process that has so far not been empty on any orders. I wish I could provide more, but I don't know what else to try. Maybe someone can see a flaw in the way I'm storing the cart that might cause CST to freak...like some persistence triggering problem or something like that. _______________________ Ron Bickers Logic Etc, Inc.

15 21

Problem passing parameters to a Python Script
by complaw＠hal-pc.org 02 Oct '01

02 Oct '01

I'm passing some paramters from an HTML form to a python script. I'm having trouble determining exactly which parameter is/isn't being passed to a python script. I get an error message saying "Zope Error" "Resource not found" along with a few troubleshooting suggestions -- but nothing else. Yes, I do know what the form is passing, and yes it does jive with the parameter list. Is something else going on? Is there a way to determine which parameter is causing the problem (i.e., get a more descriptive error message)? TIA, Ron

4 4

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

Zope September 2001