- Zope - Zope lists

How to upgrade Python in older Zope?
by Tit-Liviu Leontin 12 Sep '07

12 Sep '07

Folks, I desperately need support for large filesystem so the data.fs file can exceed 2 GB. I can only make minimal changes to the existing set-up, which consists of Zope 2.5.1 (binary release, with Python 2.1.3) on Windows Server 2003 and NTFS. From what I've read, the issue is with the old Python not having LFS enabled, so I thought I'd just upgrade it to 2.2.3 which has LFS enabled. The question is, how do I do that? Windows installer for Python doesn't know what to upgrade in the Zope install, so I'm thinking to copy the right files from the extracted Python 2.2.3 in Zope folders. What goes where? I appreciate your patience and spoonfeeding. :-) Thanks in advance! Titel

4 3

Re: [Zope] How to upgrade Python in older Zope?
by Tit-Liviu Leontin 11 Sep '07

11 Sep '07

Paul, Thank you for the quick reply! I'm aware of the risk, but it seemed the easiest way to circumvent a limitation. I guess it would be even easier to find Python 2.1.3 built with LFS enabled for Windows. :-) The reason I'm reluctant to touch anything is that I use Zope for OpenFlow, and I depend on its requirements. Currently it's OpenFlow 0.7 IIRC, while the development stopped at 1.3 and the upgrade of that application is a pain I'm trying to avoid. Also, I'm looking for the easiest possible way out, because in a month or two the entire application will be replaced with another solution. If there is no other way than take Zope through a few updates, then I'll give that a shot when I get some time to tinker with this. Thanks again, keep the ideas coming! Titel ----- Original Message ---- From: Paul Winkler <pw_lists(a)slinkp.com> To: zope(a)zope.org Sent: Tuesday, September 11, 2007 6:30:12 PM Subject: Re: [Zope] How to upgrade Python in older Zope? On Tue, Sep 11, 2007 at 07:36:18AM -0700, Tit-Liviu Leontin wrote: > Folks, > > > I desperately need support for large filesystem so the data.fs file can exceed 2 GB. > > I can only make minimal changes to the existing set-up, which consists of Zope 2.5.1 (binary release, with Python 2.1.3) on Windows Server 2003 and NTFS. > > >From what I've read, the issue is with the old Python not having LFS enabled, so I thought I'd just upgrade it to 2.2.3 which has LFS enabled. > > The question is, how do I do that? Windows installer for Python doesn't know what to upgrade in the Zope install, so I'm thinking to copy the right files from the extracted Python 2.2.3 in Zope folders. That sounds like a really bad idea. From the Zope 2.5.1 release notes: * Zope requires Python 2.1 (Python 2.2 is currently *not* supported) You should NOT assume that warning was put there for no reason :-) Also, there's not a whole lot of expertise in this community on building for Windows; we seem to be a linux/unix-heavy crowd. You'd better stick to the binary releases and not mess with them, unless you can find a bona-fide expert to help you. Anyone? :-) Meanwhile you might try migrating a *copy* of your Data.fs to Zope first to Zope 2.6.4 (still uses Python 2.1.x) and then to Zope 2.7.7 (uses Python 2.3.x). FWIW I recall 2.5 to 2.6 being a painless upgrade. I think 2.7 was a little more involved. The most likely problem to watch out for is security-related issues: your code might accidentally rely on a security weakness that was subsequently tightened, so you get permission denied at unexpected times until your code and/or configuration is fixed. Install and turn on VerboseSecurity, it's a big help with things like that. -- Paul Winkler http://www.slinkp.com _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )

2 1

Limit Zope only from Pound
by Juan Javier Carrera Obrero 10 Sep '07

10 Sep '07

Hello, I have installed pound and zope in different machines. Pound is a IP: 192.168.1.1 and Zope is in IP: 192.168.1.5:8080. Pound balances to Zope, correctly. Although, I want than Zope does not visible from external, that is to say, Zope is only accessible from Pound (and not with http://192.168.1.5:8080 manually) . I have tried con "ip-address", but it does not run. Anybody do knows how do it ? Thanks !

3 4

VERY unusual zope traceback
by robert rottermann 07 Sep '07

07 Sep '07

After my computer was iddling during the nigth I got the following traceback. look at the rather genereous number of expected parameters. how can somethings like this happen? Memory corruption? restarting zope fixed it. robert Site Error An error was encountered while publishing this resource. exceptions.TypeError Sorry, a site error occurred. Traceback (innermost last): * Module ZPublisher.Publish, line 196, in publish_module_standard * Module Products.PlacelessTranslationService.PatchStringIO, line 34, in new_publish * Module ZPublisher.Publish, line 146, in publish * Module Zope2.App.startup, line 197, in zpublisher_exception_hook * Module App.ZApplication, line 48, in __bobo_traverse__ * Module ZODB.DB, line 542, in open TypeError: open() takes at least 1946389116 arguments (4 given) in the console I see: 2007-09-07 05:33:03 ERROR PortalTransforms Cannot register transform lynx_dump, using BrokenTransform: Error Unable to find binary "lynx" in /home/robert/bin:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/qt3/bin 2007-09-07 05:33:05 WARNING ZODB.DB DB.open() has 8 open connections with a pool_size of 7 2007-09-07 05:33:06 WARNING ZODB.DB DB.open() has 9 open connections with a pool_size of 7 2007-09-07 05:33:06 WARNING ZODB.DB DB.open() has 10 open connections with a pool_size of 7 2007-09-07 05:33:11 WARNING ZODB.DB DB.open() has 11 open connections with a pool_size of 7 2007-09-07 05:33:11 WARNING ZODB.DB DB.open() has 12 open connections with a pool_size of 7 2007-09-07 05:33:11 WARNING ZODB.DB DB.open() has 13 open connections with a pool_size of 7 2007-09-07 05:33:11 WARNING ZODB.DB DB.open() has 14 open connections with a pool_size of 7 2007-09-07 05:33:11 CRITICAL ZODB.DB DB.open() has 15 open connections with a pool_size of 7 2007-09-07 05:33:11 CRITICAL ZODB.DB DB.open() has 16 open connections with a pool_size of 7

2 1

genealogy product?
by Mihamina (R12y) Rakotomandimby 07 Sep '07

07 Sep '07

Hi, Would you know any genealogy product for Zope? Is zope a tool for managing a big (200000 members) of genealogy oriented group, which has over 150,000,000 entries in the genealogy tree? It is now managed with about 20 servers and SQL databases but Zope might be a solution, isn't it? Thank you.

4 3

Re: [Zope-DB] case insensitive ZSQL queries
by Jaroslav Lukesh 07 Sep '07

07 Sep '07

Use MS-SQL or Sybase :o) ----- Original Message ----- From: "onsombal" <onsombal(a)yahoo.com> > > is there an easy way to make the following ZSQL query case-insensitive? > > select * from clients > <dtml-sqlgroup where> > <dtml-sqltest firstname op="like" type="string" optional> > <dtml-or> > <dtml-sqltest lastname op="like" type="string" optional> > <dtml-or> > <dtml-sqltest client op="like" type="string" optional> > </dtml-sqlgroup> >

3 2

Help raise Open Source visibility in the government area
by Godefroid Chapelle 06 Sep '07

06 Sep '07

Hi, ( If you have already received this email and have voted, thank you ! ) ( If you have not voted, and wanted to, this is a nice reminder. ) ( If you do not wish to vote, sorry for the noise. ) Please take 10 minutes to help raise open source profile in the government area by voting for the PloneGov project at the european egov awards. See below what PloneGov is and why you could vote to support open source even if you do not use Plone. Anyone from any country can vote, you don't have to live in the EU. And please vote *now*, the deadline is almost upon us **SEPTEMBER 7** — you are likely to forget if you don't set aside 10 minutes now. This process is unfortunately a bit involved — since we're dealing with governments — but shouldn't take longer than 10 minutes to complete. Step-by-step: 1. Go to http://www.epractice.eu/register 2. Wait for the email confirmation and log in. 3. Fill out your profile: http://www.epractice.eu/myprofile/personal http://www.epractice.eu/myprofile/professional http://www.epractice.eu/myprofile/contact (If you don't want to provide professional info, we suggest you add "I just want to vote" in the required fields) 4. Vote for PloneGov by clicking here: http://www.epractice.eu/do/voteinspiring/1026 Thanks! More information below, if you're interested in what PloneGov is. _____________________________________ What is PloneGov? PloneGov aims to create a collaborative software ecosystem where governmental organizations work together, in close relationship with SMEs, to share the cost of software development and enhanced capabilities. This new initiative started by small towns now reaches all levels of public administration and spans over 13 countries on 3 continents. http://www.plonegov.org Your vote for the "Most innovative good practice" award is a unique opportunity to reach politicians and decision makers. Winning this award will highlight the maturity achieved by the Open Source collaborative model as a pragmatic way to tackle IT challenges in society. You may vote until Friday, September 7th. The Public Sector has an important influence on many sectors of society. A wider Open Source acceptance in this field is strategic to all Open Source users and advocates. Users in sectors such as Education, NGOs and businesses would directly benefit from broader adoption. It would result in a growing pool of available software, tools, and developers. Beyond the practical example of PloneGov, your vote contributes to support Open Source values that are based on collaboration, openness and fair trade. It is an opportunity to support Open Source as an innovative model of IT development in which the Public Sector, NGOs and Education can work together and all of society will benefit. -- Godefroid Chapelle (aka __gotcha)- BubbleNet http://bubblenet.be

1 0

Running two versions of Zope as Windows services
by Stephen Souness 05 Sep '07

05 Sep '07

Hi all, We are in the process of a gradual upgrade from one 2.x version of Zope to the latest version 2 release. Both versions are being run as Windows services on Windows 2000 server. Each instance has its own version of python. The original (older) version appears to be picking up some configuration options from the newer version. Where I see this is that we have our old version was is configured to log using a daily rotating log file, but since the newer version was installed that configuration is being ignored. Can anyone give me some pointers as to where to look, or what I can change to force the old version to use it's own config? (We've already confirmed that there is nothing conspicuous in Windows Registry and environment variables). -- Stephen

1 0

SOAPMethod
by Mark Baldry 04 Sep '07

04 Sep '07

I need to get some information from a database and display it on our website. It's a very simple query just passing one number to get the record. The only way i am allowed to query this database is via SOAP. I have installed the SOAPMethod and have got it working but i cannot get the result to display. I can only view the result when i look at the source of the page. the dtml Method i am using is written - <dtml-var expr="requestStudentData('5506239')"> this is what the help that came with the product says to use. (requestStudentData is the name of the SOAPMethod and "5506239" is the query string i am passing to the database.) i'm not a developer and although i understand a bit about DTML i cannot find out what is going wrong. I've searched the web but there seems very little on SOAP/python/Zope. any help would be gratefully appreciated. Mark

7 11

utf-8 problem in Zope when using Localizer
by Patrick Ulmer 04 Sep '07

04 Sep '07

Hi, because nobody in der Localizer-Mailings list react and I thinks it could be a common problem with utf-8 in zope, I ask my question here also. I use Localizer 1.2.1 and I try out some things and all looks great. After testing Localizer my next plan was to switch from encoding ISO-8859-15 to utf-8 in Zope 2.10.3 but run into Problems when inserting text through a MessageCatalog (object of Localizer). Here is what I do in Zope: 1. I add "default-zpublisher-encoding utf-8" to my zope.conf and restart zope. 2. In ZMI I add the property "management_page_charset" and set it to "utf-8" 3. I add a new "DTML Document" and start editing. I check the encoding in my Browser and it switched to "unicode (utf-8)". Looks good. 4. I insert html-code and some russian chars for testing <html> <head> <meta http-equiv="content-type" content="text/html; charset=utf-8"> </head> <body> ...russian chars... </body> </html> After Saving all looks great in ZMI and also in my webbrowser. 5. Now I add one line to use a MessageCatalog: <dtml-var "MessageCatalog('Hallo Welt!')"> After that, all of my utf-8-chars are broken in my webbrowser. I check browser-encoding and it is still utf-8. In ZMI my "DTML Document" looks good. This line must switch something in the output-encoding in the internal page-render (I don't know, how to better explain it). Is this an error in Localizer or in Zope or have I overlook a fault? Thanks Patrick

7 13