- Zope - Zope lists

AW: [Zope] CookieCrumbler Question
by Germer, Carsten 17 Apr '03

17 Apr '03

I just solved a problem similar to that. First, when you log in with cookiecrumbler the cookie that is set is afaik persistent between http: and https:, that solves that, no need to log in twice. I found a way with cookiecrumbler that, no matter where or when the user needs to login, she will do so over SSL. What I did: - Assuming Apache in front of Zope, SSL running smoothly, actual versions of everything etc. :)) - Cookie Crumbler with forms into Zopes root - install SSLAbsoluteURL - add the attribute SSL=true to login_form - a small change to login_form <snip> action_url="came_from or 'logged_in'">  <form action="logged_in" method="POST"> </snip> Usually the form will redirect back to "came_from" but that is most likely an unsecured http:... adress! You would get the form via SSL, the post of usn/pwd would run over non-encrypted. The change to a hard-coded relative link to "logged_in" keeps the https: in front and the transmission secure :) "logged_in" then checks for "came_from" again and redirects there, changing back to http: if came_from says so. I'm not done completely yet but expect a howto about this setup sometime next week. Hope it helps! /Gem > -----Ursprüngliche Nachricht----- > Von: AM [mailto:list_subscriber@neurobs.com] > Gesendet: Mittwoch, 16. April 2003 16:55 > An: Zope > Betreff: [Zope] CookieCrumbler Question > > > Hi, > > I use a cookiecrubler with my user folder to authenticate > users on our > site. I would like to put the login_form and logging_in pages in the > https domain. > > Our regular domain is www.domain.com and I want to use > rewrite rules so > that if > - a user types in http://www.domain.com > - they get redirected to https://www.domain.com > - then get posted out to https://www.domain.com/logging_in which > - then redirects to either insecure pages or secure pages > depending on > came_from > > The location of the pages doesnt change. My question is will > that cause > any problems regarding which domain it authenticated to and > which domain > the authenticated only resources are in (http vs https) > > TIA > AM > > -- > ================================================================== > Aseem Mohanty > > Neurobehavioral Systems Inc, 828 San Pablo Ave, Albany, CA 94706 > (R) 510 7696011 (M) 510 3014871 (O) 510 5279231 > ================================================================== > "I saw `cout' being shifted "Hello world" times to the left and > stopped right there!!" -- Steve Gonedes > ================================================================== > > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://mail.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://mail.zope.org/mailman/listinfo/zope-announce > http://mail.zope.org/mailman/listinfo/zope-dev ) >

1 0

Re: [Zope] TextIndexNG QueryParser Difficulties
by Andreas Jung 17 Apr '03

17 Apr '03

As stated in my last posting this method is for testing purposes. As a workaround create your own search form and call the catalog instance directly....that's just a few lines of code. -aj --On Donnerstag, 17. April 2003 8:44 Uhr +0200 Thierry FLORAC <thierry.florac(a)onf.fr> wrote: > On Thursday 17 April 2003 06:34, Andreas Jung wrote: >> This problem *should* be fixed in 1.09. But you need to recreate the >> index. Btw. this problem is only of cosmetic nature since the core >> functionality remains untouched. >> This method is for testing purposes only. > > > Hi, > > As explained in a previous message, I have the same problem with > TextIndexNG-1.09. > I've deleted and recreated my indexes several times, with different > parameters (with or without stemmer...) without result. > So, when I : > - test the index in the ZMI throught the "Test" tab, > - click on a word in the index vocabulary, > - query the index using a "NEAR" or "PHRASE" search (using double > quotes), I receive an error message. > For example : > > Exception Type : KeyError > Exception Value : if_catalog > > Traceback (innermost last): > > * Module ZPublisher.Publish, line 98, in publish > * Module ZPublisher.mapply, line 88, in mapply > * Module ZPublisher.Publish, line 39, in call_object > * Module Shared.DC.Scripts.Bindings, line 252, in __call__ > * Module Shared.DC.Scripts.Bindings, line 283, in _bindAndExec > * Module App.special_dtml, line 174, in _exec > * Module DocumentTemplate.DT_Let, line 75, in render > * Module DocumentTemplate.DT_Util, line 201, in eval > __traceback_info__: getDocumentsForWord > * Module <string>, line 0, in ? > * Module Products.TextIndexNG.TextIndexNG, line 851, in > getDocumentsForWord > * Module Products.TextIndexNG.TextIndexNG, line 843, in _getCatalog > * Module OFS.Traversable, line 120, in unrestrictedTraverse > __traceback_info__: ([], 'if_catalog') > * Module OFS.Application, line 108, in __bobo_traverse__ > > Where 'if_catalog' is the ID of my catalog... > > Simple queries just using "AND" or "OR" operators work fine. > Please, please, HELP !!! > > Thierry

1 0

RE: [Zope] Single Sign on
by Meilicke, Scott 16 Apr '03

16 Apr '03

What user folder did you use for the radius auth? About a year ago I did get zope and the CMF to auth against active directory, but unfortunately I did not record my settings... Thanks - Scott -----Original Message----- From: PieterB [mailto:pieterb@gewis.nl] Sent: Wednesday, April 16, 2003 3:34 PM To: David Orr Cc: zope(a)zope.org Subject: Re: [Zope] Single Sign on David wrote > I am currently building an intranet utilising Zope/Plone and plan on > authenticating users via LDAP (ldapuserfolder). However I am now expected > to implement a "single sign on" system for the company which currently uses > NT domains to authenticate users. > > Has anybody had any experience in this? I'm beginning to think that it may > be "easier" (short term at least) to just authenticate people via NT domain > and drop the ldap. I will be very grateful for any advice. I had serious troubles trying to authenticate zope to an Active Directory (NT-domain), because it's not completly LDAP. It was relatively easy to use Radius (which is also supported by NT, but might require some additional software on the NT domain server). I used Apache 1.3.x in front of Zope. The user was both authenticated by Apache and Zope. Pieter _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev ) The information contained in this email message may be privileged and is confidential information intended only for the use of the recipient or any employee or agent responsible for delivering it to the intended recipient. Any unauthorized use, distribution or copying of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify the sender immediately and destroy the original message and all attachments from your electronic files.

1 0

RE: [Zope] Zope Server on Linux
by sean.upton＠uniontrib.com 16 Apr '03

16 Apr '03

Please send messages to this list as plain-text. Zope has a built-in http server, but that doesn't mean you want to run non-Zope web apps under it. Put Zope behind Apache (google for this) and use Apache as a front-end for Zope (via mod_proxy + mod_rewrite), and as a server to run PHP... Sean -----Original Message----- From: Mosquito [mailto:mosquitow@shaw.ca] Sent: Tuesday, April 16, 2002 12:46 PM To: zope(a)zope.org Subject: [Zope] Zope Server on Linux Hello everyone, I'm new to LINUX, ZOPE, PYTHON, and this mailing list. I have a ZOPE server running on Linux and I'm trying to get my forums to work. They require PHP and mySQL both of which I have but I'm not sure how to install them into my ZOPE server. Any suggestions? ~Mosquito ____________________________________________________ IncrediMail - Email has finally evolved - Click Here

1 0

Re: Case Sensitive URLs
by Josef Meile 16 Apr '03

16 Apr '03

You could use the JRedirector of Jens. It's really easy and nice: For example, you could say that your data is in /Folder and then define a case insensitive mapping to redirect everything else (like FOLDER, folder, FoLdEr) to that address. See http://www.dataflake.org/software/jredirector for more details. Regards, Josef

1 0

FTP Process Errors
by Patel, Tejash 16 Apr '03

16 Apr '03

Hello all, I have being Ftp files fine, but recently I have added new folders on my ftp system which mirror my sites folder structure. I am able to ftp file over to some folders. But for some files, I am getting an error: 426 Error Creating File. I don't understand why I am getting this message, has one encountered this before if so can you help me. Thank you. TP

1 0

errors in zodb after packing
by Luca Olivetti 16 Apr '03

16 Apr '03

Right after packing I have an error like this two or three times a week (I pack daily): 103620137 object serialno 0x034ae17b8d66f399 does not matchtransaction id 0x034c44e302d59b5d I know it's after packing because I run fstest before and after (this problem has been bugging me for a while). This is with zope 2.6.1 To recover this error I have to use 2.6.0 fsrecover that gives me a file with the same size but with no errors. 2.6.1 fsrecover doesn't work at all. Everything seems to work fine though, even if I don't fsrecover the database (at least my user aren't complaining). I reported this problem before and it was suggested to me to report it in the zodb mailing list, but I'm not subscribed to that list. Am I the only one seeing this problem? Should I worry? Bye -- Luca Olivetti Wetron Automatización S.A. http://www.wetron.es/ Tel. +34 93 5883004 Fax +34 93 5883007

4 3

Re: Pluggable brains sample using Script (Python) (J Cameron Cooper)
by Julian Sanchez 16 Apr '03

16 Apr '03

Cameron, Cool! I knew it was going to be easy. Thanks :-) BTW, I noticed that once you get an instance of the object, you *can* read the attributes (which of course correspond to the columns from the SQL query), but it doesn't let me change the values unless I create "wrapper methods" inside the class. Is that a Zope security thing, bug, unimplemented feature... do you know? Thanks, Julian > I was wondering if somebody has a handy example on how to use > pluggable brains inside python scripts. For the most part I've only > seen the sample in which you have a class: > > class MyDataClass: > def getSomething(self): > return self.field1 + self.field2 > > and then you have a DTML method that goes something like > > <dtml-in myquery> > <dtml-var getSomething> > </dtml-in> > > How would I access the MyDataClass if I were to write a python script > rather than a DTML method? Untested, but it should look very similar to this: for elt in context.myquery(parameter1="dog", parameter2="goose"): print elt.getSomething() The parameters are those of the ZSQL Method, if any. The example above assumes two dummy parameters. Depending on your architecture, 'context' might be 'container' or another variable. It might also be written like for elt in context.myquery(REQUEST=REQUEST): print elt.getSomething() if you're getting your parameters from the HTTP request. --jcc

3 2

Access rule for Python Product
by Chad Nantais 16 Apr '03

16 Apr '03

I need to run a function whenever my python product is published. This function will record the name os the user that viewed the object and the id of the object. If I was doing this all through the ZMI, I would create an access rule for each customer (folderish) object instance. However, I want this access rule built into my product. How would I do this? Thanks -- Chad Nantais Rednaxel Interactive

3 2

calling dtml-method from python script
by Mike Doanh Tran 16 Apr '03

16 Apr '03

Hi, How do i call a dtml-method from a python script? Thanks, Mike

3 2