- Zope - Zope lists

(no subject)
by LYNN 28 Jun '06

28 Jun '06

zope，hi i need a kind of content type that describing network device such as router,swtich and server .i can use those content object access actual network device by snmp. can you tell me are there this kind content type? give me some interrelated information ,let me learn about it . thinks! 　　　　　　　　sincerely! 　　　　　　　　LYNN 　　　　　　　　LYNN0210(a)163.COM 　　　　　　　　　　2006-06-28

1 0

Improved Zope Org Proposal
by Andrew Sawyers 27 Jun '06

27 Jun '06

Sorry for the cross-post; lets but wanted to make sure those on the zope-web list saw this. Lets keep this on the zope list going forward. For sometime, we have tried to coordinate various numbers of people in the community to get an improved Zope.org up and functional. Some of this improvement was through the 'visual' look and feel of the site and the other was by cleaning up what has been often thought as unmaintainable code as well as reducing the content scope of Zope.org. During this time, it was largely agreed that the zope.org site would highlight ZOPE the technology, Documentation, the products found in the Zope Code Repository, and highlight the community, to offload features which people had previously relied on zope.org for in the past. The current zope.org site would remain available for some time while a (tedious) and manual migration of content deemed beneficial would be placed on the new site. To the best of my knowledge, this is still agreed on by all those who over the months participated in countless #zope-web irc chats and discussions on the mailing lists. It then came to technology. Some cared some didn't. I personally didn't if the result was something which the community could be proud of and not make excuses for as they directed people to the site. This caused some stalling of the momentum. We had many ideas, some text which is in svn at codespeak, and artisitic work being done. Geoff Davis contacted me with a proposal which would get this move started and has offered resources to accomplish this to finally happen. They currently have taken the artistic work done by Tom Von Lahndorff and put it online at http://new.zope.nl for preview. I'd like to forward Geoff's proposal to the list, now that the Zope Foundation is setup to act on this generous offer by members of the community. I'd like to see this get blessed so we can move forward and finally get a site which has a focused scope and is something the community can be proud of. I have done some minor editorial changes to reflect discussions back and forth since the initial offering. A group of people in the (Plone) community have volunteered their time and resources to put together an improved, **interim** zope.org site. We understand that work is underway on a longer-term zope.org solution -- the current initiative is not intended to replace this longer-term work; rather, the goal is to improve upon the existing zope.org site until something better is put together. I am appending a sketch of the vision and would like very much to hear your feedback. Geoff Maintenance and Administration ------------------------------ A number of people have expressed concerns about the maintenance of zope.org going forward. We share those concerns! A central goal in setting this site up is to make maintenance as painless as possible. Toward that end, we envision doing the following: * The zope.org site will be set up with the same software that runs plone.org. The sites will have different skins, of course, and will be configured a bit differently, but the underlying software will be the same. * The products on the site will all be off-the-shelf products that have an active community of developers. The current likely candidates: PlonePAS + LDAP for site management authentication, PloneHelpCenter for documentation, and PloneSoftwareCenter for software distribution. For bug tracking, either links to the existing ZC trackers or a Trac installation. * plone.org and zope.org software updates will be done at the same time and by the same people. The more similar the code/products are, the simpler it will be to update them in parallel. The Plone community will manage upgrades of the off-the- shelf code. However, if people decide to customize the code on the zope.org site, those people will then be responsible for ensuring its continued functionality during upgrades. This should be discouraged without valid requirements someone is willing to 'pay' for, either with $ or labor. * zope.org will have a paid sysadmin. Bas van der Linden of Amaze has volunteered the services of Wichert Akkerman, the very talented sysadmin who currently administers plone.org. * zope.org will be hosted outside of ZC's servers. I believe Bas has lined up a suitable box similar to the one that runs plone.org (dual P4-class processors, lots of memory). Content ------- * Volunteers from the Zope community will be responsible for the site's content. The current mock-up uses a skin designed by Tom Von Lahndorff. I imagine that the initial text and information architecture will come from the svn repository of content that Andrew Sawyers and others have been working on. See http://new.zope.nl for an initial a mock-up. The existing concept of membership for uploading bit-rot content will be retired. * Existing community content on zope.org will NOT be migrated. The content will be made available on ZC's existing server via URL rewriting (to keep existing links from breaking) or by moving everything to an old.zope.org domain. The best content will be migrated by hand to PloneHelpCenter / PloneSoftwareCenter products. * The zope.org site should acknowledge contributors in a overt fashion. "Zope Rock Stars" who have risen up above the call of duty, contributors, etc should be noted. The Foundation can determine how to implement this, but those paying for and providing services should receive acknowledgment. Please discuss this and present your views for the Foundation. Now that they have a board they can decide how to proceed. I would like to thank all the hard work of those who have tried to see this through. Thanks, Andrew Sawyers

12 31

OracleStorage - DCOracle2
by jagarrido＠emergya.info 27 Jun '06

27 Jun '06

Hi all!! I need save the zope objects in an Oracle 8.1.7 Database,who I'm trying do it with DCOracle2 Product. My initial problem is I need save objects in Oracle Database who reside in other machine distinc Zope resides. Due to it, I have a compilation problem because Oracle server resides in other machine(error: /ora00/ora8i/u01/app/oracle/product/8.1.7/lib/libclntsh.so not readable; unable to determine your oracle version. make: *** [.config] Error 2 ) Any suggestions? Thank you for all

4 3

DeadlockDebugger revisited
by Matthew X. Economou 27 Jun '06

27 Jun '06

I thought a recent operating system upgrade (FreeBSD 5.4 to 6.1) fixed my problems with Zope. Unfortunately, once I re-compiled Python et al (to remove dependencies on the old libraries), my problems with Zope deadlocking recurred. I tried to use a combination of tools to try to discover the root cause of this problem, but nothing seems to work. What am I missing, and what else can I try? This system is: Nokia IP440 (Pentium II-333MHz, 256 MB RAM) FreeBSD 6.1-RELEASE-p1 Python 2.3.5 Zope 2.8.6 Plone 2.1.2 Trace and event logs: I set up the trace log to save all messages, and the last few lines of the access, event, and trace logs are: Z2.log: 127.0.0.1 - Anonymous [15/Jun/2006:22:52:54 -0400] "GET /VirtualHostBase/http/web.irtnog.org:80/irtnog/VirtualHostRoot/irtnog/he lpcenter_icon.gif HTTP/1.1" 200 1322 "http://web.irtnog.org/howtos-orig/freebsd-pf-pppoe" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 1.1.4322)" event.log: 2006-06-15T22:40:28 INFO Plone Debug Error exceptions.AttributeError on getBeginAndEndTimes while rendering portlet here/portlet_simpleblog/macros/portletBlogFull_local trace.log: B 221198124 2006-06-15T22:52:54 GET /VirtualHostBase/http/web.irtnog.org:80/irtnog/VirtualHostRoot/Members/x enophon/photos/washdc-jan-2006/photoalbum_view?b_start:int=20 I 221198124 2006-06-15T22:52:54 0 DeadlockDebugger + threadframe: Once the Zope process deadlocks, it ceases to respond on port 8080 (the configured listener port). Thus it is not possible to obtain a thread dump from Zope using this package. Lsof: I checked the list of open files on the Zope process but didn't see anything out of the ordinary (attached as "zope-lsof.txt") Strace/Truss/Ktrace: I traced the process using ktrace, dumped it with "kdump -H" to get thread IDs, and got the following information: 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL 7505 100075 python2.3 PSIG SIGSEGV SIG_DFL I traced the process using truss and got the following information: SIGNAL 11 (SIGSEGV) SIGNAL 11 (SIGSEGV) SIGNAL 11 (SIGSEGV) SIGNAL 11 (SIGSEGV) SIGNAL 11 (SIGSEGV) SIGNAL 11 (SIGSEGV) Strace showed the same information: --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- --- SIGSEGV (Segmentation fault: 11) --- GDB + attach + info threads (https://engineering.purdue.edu/ECN/Resources/KnowledgeBase/Docs/2006051 8104722): The faulting thread seems to be in the middle of pthread_mutexattr_init. (gdb) info threads * 7 LWP 100075 0x2820e5c2 in pthread_mutexattr_init () from /usr/lib/libpthread.so.2 6 Thread 0x8111000 (sleeping) 0x2820df0f in pthread_mutexattr_init () from /usr/lib/libpthread.so.2 5 Thread 0xa318a00 (LWP 100062) 0x2821546b in pthread_testcancel () from /usr/lib/libpthread.so.2 4 Thread 0x991ac00 (runnable) 0x00000000 in ?? () 3 Thread 0x9062400 (runnable) 0x0cea3a2c in ?? () 2 Thread 0x9a37a00 (sleeping) 0x2820df0f in pthread_mutexattr_init () from /usr/lib/libpthread.so.2 1 Thread 0x9a35800 (sleeping) 0x2820df0f in pthread_mutexattr_init () from /usr/lib/libpthread.so.2 None of the threads are in the sigsuspend, poll, select, or kill state, although it's possible that the sleeping state is equivalent to sigsuspend. At a whim, I tried stepping into the process, but this didn't do anything other than show the SEGV on the console. (gdb) call PyRun_SimpleString("import string,sys,os,ZServer; sys.stdout=open('/tmp/urls','w',0); print string.join(map(lambda a:str(getattr(a,'env',{}).get('PATH_INFO','')), sys.modules['asyncore'].socket_map.values()), '\\n')") Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x9062400 (LWP 100075)] 0x0cea3a2c in ?? () The program being debugged was signaled while in a function called from GDB. And: (gdb) call PyRun_SimpleString("import sys, traceback;sys.stderr=open('/tmp/tb','w',0); traceback.print_stack()") [Switching to Thread 0x9062400 (LWP 100114)] Cannot set lwp 100114 registers: Invalid argument Cannot set lwp 100114 registers: Invalid argument -- jsoffron: I'm generally pretty high on national defense... Mr. Bad Example: Careful...it's a gateway policy. Before you know it, you'll be mainlining the hard stuff like trade agreements. jsoffron: Too late...I've been freebasing Nafta all day... Sweet, sweet NAFTA. - As seen on Slashdot

2 5

Problem running zopectl
by Mike B 26 Jun '06

26 Jun '06

I'm getting the following error message when I try to run zopectl. I've googled it and looked through the archives but found nothing. Any help would be appreciated. I'm running python 2.4.3 and zope 2.9.3. Traceback (most recent call last): File "/usr/share/zope/zope/lib/python/Zope2/Startup/zopectl.py", line 316, in ? main() File "/usr/share/zope/zope/lib/python/Zope2/Startup/zopectl.py", line 274, in main options.realize(args) File "/usr/share/zope/zope/lib/python/Zope2/Startup/zopectl.py", line 91, in realize ZDOptions.realize(self, *args, **kw) File "/usr/share/zope/z-2.9.3//lib/python/zdaemon/zdoptions.py", line 273, in realize self.load_schema() File "/usr/share/zope/z-2.9.3//lib/python/zdaemon/zdoptions.py", line 321, in load_schema self.schema = ZConfig.loadSchema(self.schemafile) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/loader.py", line 31, in loadSchema return SchemaLoader().loadURL(url) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/loader.py", line 65, in loadURL return self.loadResource(r) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/loader.py", line 159, in loadResource schema = ZConfig.schema.parseResource(resource, self) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/schema.py", line 27, in parseResource xml.sax.parse(resource.file, parser) File "/usr/local/lib/python2.4/xml/sax/__init__.py", line 33, in parse parser.parse(source) File "/usr/local/lib/python2.4/xml/sax/expatreader.py", line 107, in parse xmlreader.IncrementalParser.parse(self, source) File "/usr/local/lib/python2.4/xml/sax/xmlreader.py", line 123, in parse self.feed(buffer) File "/usr/local/lib/python2.4/xml/sax/expatreader.py", line 207, in feed self._parser.Parse(data, isFinal) File "/usr/local/lib/python2.4/xml/sax/expatreader.py", line 300, in start_element self._cont_handler.startElement(name, AttributesImpl(attrs)) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/schema.py", line 99, in startElement getattr(self, "start_" + name)(attrs) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/schema.py", line 475, in start_schema keytype, valuetype, datatype = self.get_sect_typeinfo(attrs) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/schema.py", line 201, in get_sect_typeinfo datatype = self.get_datatype(attrs, "datatype", "null", base) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/schema.py", line 194, in get_datatype return self._registry.get(dtname) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/datatypes.py", line 398, in get t = self.search(name) File "/usr/share/zope/z-2.9.3//lib/python/ZConfig/datatypes.py", line 423, in search package = __import__(n, g, g, component) File "/usr/share/zope/z-2.9.3//lib/python/Zope2/Startup/datatypes.py", line 21, in ? import OFS.Uninstalled File "/usr/share/zope/z-2.9.3//lib/python/OFS/Uninstalled.py", line 16, in ? import SimpleItem, Globals, Acquisition File "/usr/share/zope/z-2.9.3//lib/python/OFS/SimpleItem.py", line 26, in ? import AccessControl.Role, AccessControl.Owned, App.Common File "/usr/share/zope/z-2.9.3//lib/python/AccessControl/__init__.py", line 17, in ? from Implementation import setImplementation File "/usr/share/zope/z-2.9.3//lib/python/AccessControl/Implementation.py", line 98, in ? setImplementation("C") File "/usr/share/zope/z-2.9.3//lib/python/AccessControl/Implementation.py", line 51, in setImplementation from AccessControl import ImplC as impl File "/usr/share/zope/z-2.9.3//lib/python/AccessControl/ImplC.py", line 30, in ? from ImplPython import RestrictedDTML, SecurityManager, ZopeSecurityPolicy ImportError: No module named ImplPython

2 1

zcatalog strange behavior
by bard stéphane 26 Jun '06

26 Jun '06

Hi every one I've used zcatalog 2 years ago. Every thing was perfect My zclass objects where removed from zcatalog when they were delete etc ... Today i try to create another zclass on the same zope server (2.6) zclass with zobject,zcatalogaware inheritance and the zcatalogawareness don't work any more. And I don't know why !!!!!! So each time a property is modified i should force a refresh like that : my_zcatalog.update(refresh=1) this refresh all my indexes. But it's not normal On the other zclass product, each time an object is modified indexes are modified transparently How can i check,debug, test Zcatalog-Aware ability ? Thank's for all

2 2

Zope not sending images problem
by Aidas Dailidė 26 Jun '06

26 Jun '06

Hi there, I've installed 2.7.8 on OS X Server and added some Zope product. The problem is that the web page works fine from localhost, but from remote hosts it fails to load some random images. HTML loads quickly and without any problems. What could be wrong? Sometimes some of the images load and sometimes not. Maybe I'm out of free memory or something? Thanks a lot, Aidas

3 2

Content Disposition - Download files
by Bruno Grampa 26 Jun '06

26 Jun '06

Hello, i want to send an image or a pdf to a browser not for viewing but for downloading. I've written this code: <dtml-call "RESPONSE.setHeader('Content-type', 'application/force-download')"> <dtml-call "RESPONSE.setHeader('Content-Disposition', 'attachment; filename=filename.gif')"> now i have to send the file as a binary flow, but i don't know how to do. Can you help me? Thanks, Bruno

5 6

get non-acquired attributes of an instance
by thomas desvenain 26 Jun '06

26 Jun '06

hello, is it possible to get the list of all an object's attributes, excepted the ones acquired from parents ? thanks -- Thomas Desvenain Junior Plone/Zope analyst-developer, Looking for a Job ! Now, trainee at Institut National de Recherche Agronomique Mathématiques, Informatique et Génôme laboratory 78350 Jouy en Josas +33 (0)1 34 65 29 43

3 2

Import Modules
by Luiz Fernando B. Ribeiro 26 Jun '06

26 Jun '06

Hello, I manage my own servers developing web applications and I would like to remove the import restrictions of python modules in python scripts. Is it possible? How can I allow other modules to be imported? I have been using external modules but it is starting to become nonproductive since I have to create functions to simple problems like md5, re, etc, and just using the needed modules would be much simple. I use Zope as an application server and my clients do not have access to the ZMI, so I'm not concerned with protection against misuse by my clients. Thanks in advance, -- Luiz Fernando B. Ribeiro

5 7