May 2001 - Zope - Zope lists

longest runnig Zope
by matt standish 17 May '01

17 May '01

What is the longest uptime anyone has had with Zope and what OS was it running?

14 13

Re: [Zope] Parsed XML build error
by Christian Wittern 17 May '01

17 May '01

sean.upton(a)uniontrib.com writes: > I have this same problem on my Debian boxes, but everythin works on a > Mandrake 7.1 box, which is where I compile ParsedXML usually.... Thoughts as > to why?? > On Debian, you need the python-dev package to compile this successfully All the best, Chris -- Institute for Research in Humanities, Kyoto University 47 Higashiogura-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8265, JAPAN

1 0

RE: [Zope] Parsed XML build error
by sean.upton＠uniontrib.com 16 May '01

16 May '01

I have this same problem on my Debian boxes, but everythin works on a Mandrake 7.1 box, which is where I compile ParsedXML usually.... Thoughts as to why?? Sean -----Original Message----- From: Tim Moore [mailto:tmoore@tembel.org] Sent: Wednesday, May 16, 2001 1:52 PM To: zope(a)zope.org Subject: [Zope] Parsed XML build error I'm trying to build the Expat library as part of the ParsedXML product install. This with Zope 2.3.2 on Linux. Here's what I run: cd /usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat /usr/local/Zope-2.3.2/bin/python setup.py It seems to get through the confugure step ok, but then it fails somewhere during make: make -f ./Makefile.pre.in VPATH=. srcdir=. \ VERSION=$VERSION \ installdir=$installdir \ exec_installdir=$exec_installdir \ Makefile make[1]: Entering directory `/usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat' make[1]: *** No rule to make target `/usr/local/Zope-2.3.2/lib/python1.5/config/Makefile', needed by `sedscript'. Stop. make[1]: Leaving directory `/usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat' make: *** [boot] Error 2 Any clues? I thought this was supposed to be pretty straightforward :-( -- Tim Moore _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Parsed XML build error
by Tim Moore 16 May '01

16 May '01

I'm trying to build the Expat library as part of the ParsedXML product install. This with Zope 2.3.2 on Linux. Here's what I run: cd /usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat /usr/local/Zope-2.3.2/bin/python setup.py It seems to get through the confugure step ok, but then it fails somewhere during make: make -f ./Makefile.pre.in VPATH=. srcdir=. \ VERSION=$VERSION \ installdir=$installdir \ exec_installdir=$exec_installdir \ Makefile make[1]: Entering directory `/usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat' make[1]: *** No rule to make target `/usr/local/Zope-2.3.2/lib/python1.5/config/Makefile', needed by `sedscript'. Stop. make[1]: Leaving directory `/usr/local/Zope-2.3.2/lib/python/Products/ParsedXML/Expat' make: *** [boot] Error 2 Any clues? I thought this was supposed to be pretty straightforward :-( -- Tim Moore

1 0

RE: [Zope] HTML e-mail and irony
by Capesius, Alan 16 May '01

16 May '01

Some problems contributing to this is that Egroups/YahooGroups interface interprets HTML mail for the user. So those who are aware of HTML vs. text issues may be unaware that they are sending to the list in HTML if they read via egroups and then mail to the list. (648 people) They never see a restriction until they get a reply from someone on the list. The NIP search engine doesn't handle it the same way, so you see the attachment, as do those who subscribe directly. And... users of Microsoft Exchange Server, Outlook etc.. based email systems may not be able to control the settings if the server is set to override it or may be unaware that MS does not default to plain text. Some incarnations require that the user manually change the setting to plain text EVERY time they send a message. >>>-----Original Message----- >>>From: Jeff Peterson [mailto:jpeterso@the-bridge.net] >>>Sent: Wednesday, May 16, 2001 2:36 PM >>>To: Zope@Zope. Org >>>Subject: RE: [Zope] HTML e-mail and irony >>> >>> >>>That is the real issue here, those who know better. For the >>>most part, and >>>this is a guess, most who send html emails are newbies. I >>>will go further >>>and say that this is likely not just to Zope. Zope is FREE >>>and in it's most >>>minimal uses, very SIMPLE to manage for anyone. What >>>attracts newbies? >>>SIMPLE and FREE... >>> >>>What I am saying is I am of the school of gently pointing >>>"violators" to >>>somewhere or something useful in changing the behavior. >>>Telling them to >>>stop may work for some, others may not know how to turn it >>>off and are >>>embarrassed to ask and they need to be shown, by a tutorial >>>or someone >>>taking the time to explain it. In any case, our attitude >>>should be that of >>>ambassadors of list etiquette, because we want the list to >>>grow and we want >>>new users of Zope. >>> >>>-- >>>Jeffrey D. Peterson >>>Webmaster/Web & Web Applications Engineer >>>Range TV Cable & Broadband >>>1818 E. 3rd Ave. Hibbing, MN 55746 >>>jpeterso(a)rangebroadband.com >>> >>>> -----Original Message----- >>>> From: zope-admin(a)zope.org [mailto:zope-admin@zope.org]On >>>Behalf Of Peter >>>> Sabaini >>>> Sent: Wednesday, May 16, 2001 2:00 PM >>>> To: Jim Penny >>>> Cc: zope(a)zope.org >>>> Subject: Re: [Zope] HTML e-mail and irony >>>> >>>> >>>> Well Web developers should know best when not to use HTML ;) >>>> >>>> On Wed, 16 May 2001, Jim Penny wrote: >>>> >>>> > Is it not a bit ironic that a mailing list about a web >>>development >>>> > system has such a strong policy against HTML e-mail. >>>> > >>>> > (Not that I disagree, html email is, whether one is >>>concerned about >>>> > legibility, bandwidth, security, or privacy, an >>>unadulterated evil. >>>> > But still, there is a tinge of irony). >>>> > >>>> > Jim Penny >>>> >>>> >>>> >>>> >>>> _______________________________________________ >>>> Zope maillist - Zope(a)zope.org >>>> http://lists.zope.org/mailman/listinfo/zope >>>> ** No cross posts or HTML encoding! ** >>>> (Related lists - >>>> http://lists.zope.org/mailman/listinfo/zope-announce >>>> http://lists.zope.org/mailman/listinfo/zope-dev ) >>> >>> >>>_______________________________________________ >>>Zope maillist - Zope(a)zope.org >>>http://lists.zope.org/mailman/listinfo/zope >>>** No cross posts or HTML encoding! ** >>>(Related lists - >>> http://lists.zope.org/mailman/listinfo/zope-announce >>> http://lists.zope.org/mailman/listinfo/zope-dev ) >>>

1 0

Crazy Problem With Having to Restart Zope Won't Go Away!
by Ben Ocean 16 May '01

16 May '01

Hi; For some reason, from what I can judge a bug in the source code that affects some unfortunate ones such as myself, ZServer crashes every few hours and has to be re-started. So I wrote this script: >>> #!/bin/sh while : # if there's a page there, copy it to a test file do `wget -q -t 3 -T 30 http://thewebsons.com:8080/index_html -O test` # if there's something in the test file, go take a nap if grep '^<' test then sleep 60 # whoops! Why the heck does RH6.2 complain there's no ./start file?? Sometimes it complains, sometimes not. Hmmm... else if ./start then ./start & sleep 60 else sleep 10 fi fi done <<< and just let the fool thing run (in the Zope installation). But now I get error messages stating ./start doesn't exist! That's why the *else if* stuff, but it _still isn't good enough! Come back hours later and Zope's dead as a doornail. Furthermore, my script's not running, either. I don't get it! What am I not seeing? TIA, BenO

5 6

ODBC DSN file
by Menard.Jean-Francois＠hydro.qc.ca 16 May '01

16 May '01

I need to transform a lot of data from multiple Excel files and export one standard big text file. I created an ODBC System DSN, and it work fine. But I have about 100 excel files, and I would like to develop an interface with a dropdown list with all the excel files in my directory, choose one, and import it. Any ideas how I could do that? I tried to create a File DSN, but Zope doesn't seem to detect it. With such a connection, I could change the connection string into the DSN file when needed. So: - Is it possible to connect to a File DSN ODBC from Zope? - Is there a better, cleaner solution I could try? Thanks! Jean-François Ménard Intranet DPAS Pratiques d'affaires et orientations * (514) 840-3000 poste 3939 * (514) 840-5585 * menard.jean-francois(a)hydro.qc.ca * 855 Ste-Catherine est, 6e étage Montréal, Qué. H2L 4P5

3 5

DTML in Properties?
by Rahsheen Porter 16 May '01

16 May '01

I'm using ZStyleSheets and wanted to set the width of a layer to the width of the actual image which appears in it. I know that Zope has the image's size stored as a property of the image and this property can be acessed via DTML, but can I put DTML as the Value of the ZSSAttribute? (or any property, for that matter) --- Rahsheen Porter __________________________________________________ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/

1 0

HTML e-mail and irony
by Jim Penny 16 May '01

16 May '01

Is it not a bit ironic that a mailing list about a web development system has such a strong policy against HTML e-mail. (Not that I disagree, html email is, whether one is concerned about legibility, bandwidth, security, or privacy, an unadulterated evil. But still, there is a tinge of irony). Jim Penny

4 3

I don't more receive your maillist
by unknown＠example.com 16 May '01

16 May '01

weelly(a)libero.it Bye-Bye -- weelly

1 0