November 2003 - Zope

error(200) zdaemon process 859 terminated by signal SIGXFSZ(25) .
by Chuck Aamdi 05 Nov '03

05 Nov '03

Chuck Aamdi wrote: >> Jamie Heilman wrote: > > >>> >Chuck Aamdi wrote: >> >> >>>> >>I have be runnnig Zope & cmf for my Organisation for a while everything >>>> >>functioning fine and also have created other zope author content >>>> >>managers who have been updateing their folders .I now recieved this >>>> >>error(200) zdaemon process 859 terminated by signal SIGXFSZ(25) . >>> >>> >>> > >>> >Version of Zope? Operating system? SIGXFSZ implies you're exceeding >>> >a (file size) resource limit. I think the LFS guys might be using it >>> >for other nefarious purpsoses as well. >> >> >> >> Using Zope version 2.6.1 O/S Linux Red Hat 8. >> >> Is there a way to restore it as I have gone back to a backup - but would >> meen that I hav lost a lot of web work . >> And Also would meen not worth continuing until we replace Zope Intrenal >> db with Postgresql . > > 1) keep replies on the list, my mail-followup-to was set appropriately 2) upgrade to Zope 2.6.2 3) "a way to restore it" ... what is "it"? Have you established why zdaemon received a SIGXFSZ? Did your FileStorage exceed 2G perhaps? Are your python and libc built with LFS support? Does "it" refer to your FileStorage? Don't make us guess, it wastes time. 4) Zope internal db, being what exactly? The default ZODB FileStorage, a Gadfly instance? Sorry for my vaguness I wasn't aware the the error given needed further disecting I will check for 1) To this I will use the list 2) I am using this version 2.6.1 for now . 3) I will investigate FileStorage - I know that the var/data.fs files were 450mb 4) I assumed ZODB was the internal db .I note that the buffer is set to 800kb and can be exceeded. I have read the Plone Doc's and it didn't flag and specify - filestorage or LFS So look again. Cheers Chuckie -- Chuck Amadi, ICT Systems Programmer, Brecon Beacons National Park Authority Direct Line: 01874 620440 FAX: 01874 622574 EMAIL: chuck.amadi(a)breconbeacons.org _______________________________________ \ \ \ Chuck Amadi,ICT Systems Programmer \ __________ | \ \ / \___-=O`/|O`/___| \ . \_______\ / | / ) / / `/-==__ _/__|/__=--| / / * \ | | / / (o) /______________________________________/ Nid yw'r farn a fynegir gan anfonwr y neges hon o anghenraid yn adlewyrchu barn Awdurdod Parc Cenedlaethol Bannau Brycheiniog. Neges yw hon a fwriadwyd ar gyfer y derbynnydd/derbynyddion yn unig ac fe'i hanfonir yn gyfrinachol; os ydych yn ei dderbyn mewn camgymeriad, a fyddech gystal %/1??iso8859-15?â rhoi gwybod i ni (yn it(a)breconbeacons.org) ac yna dil%/1??iso8859-15?ëwch bob copi. The views expressed by the sender of this message don't necessarily represent those of Brecon Beacons National Park Authority. This message is intended for the addressee(s) only and is sent in confidence; if you receive it in error, please can you let us know (at it(a)breconbeacons.org) and then destroy all copies. --------------------------------------------------------------------------- Brecon Beacons National Park Authority takes every care to keep its network free from viruses. All emails are scanned and verified virus-free by Sophos Anti-Virus software. *** IT IS THE RECIPIENTS RESPONSIBILITY TO CHECK ALL MESSAGES FOR VIRUSES ***

2 1

exUserFolder authentication
by drew nichols 05 Nov '03

05 Nov '03

Hi, I have changed over from cookieCrumbler to XUF for cookie based authentication. How do i get XUF to do a credentialsChanged (as in CC) In CC users can change their password and not have to log in again, but in XUF they can change password but are logged out. Pls help. Drew

1 0

RE: [Zope] Linux distributions for Zope Servers
by Samir Mishra 05 Nov '03

05 Nov '03

I'll second that. -----Original Message----- From: Dylan Reinhardt [mailto:zope@dylanreinhardt.com] Sent: Tuesday, November 04, 2003 11:33 To: Dennis Allison Cc: Zope Users Subject: Re: [Zope] Linux distributions for Zope Servers On Mon, 2003-11-03 at 22:04, Dennis Allison wrote: > I'm not excited about converting to the RH Enterprise distribution and so > am beginning to shop around for a different, a possibly better, > distribution--something stable, well integrated, complete, and with a > rational release cycle, stable SMP support, and support for AMD Athlon > and AMD-64 processors. There are a number of candidate--Suse, > Mandrake, Debian, etc. > > Anyone care to document their experiences, good and bad? I have nothing but good stuff to say about Gentoo. It's a bit different from Red Hat... the package manager actually works, for starters. :-) More importantly, the software release cycles are usually both timely and sane. Community support is generally knowledgeable and friendly. Debian makes a great choice too, but I find that Gentoo's community is just a bit more focused and helpful. $.02, Dylan _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )

1 0

[Python/Zope]how to open a "File"
by Rakotomandimby M. A. 05 Nov '03

05 Nov '03

Hi all , I'm running Zope 2.6.2 (binary) on a Linux box. I FTP-uploaded to the server (into the Site root) a file named "foo". The file has been added as a File Object ( no problem for that ) . This file content a single line ended by a '\n' , wich is an IP address( no problem for that either ) I wrote a very simple python Script that should return the line inside that file _without_ the final '\n' : import string fichier = open('ancienne_ip','r') ip = fichier.readline() ip = string.strip(ip) return ip the problem is that i got error for this : Error Type: NameError Error Value: global name 'open' is not defined What did i do wrong ? Thnak you .

2 1

restricted website access
by Justin Xi ZHU 05 Nov '03

05 Nov '03

Hi, I would like to restrict user access to certain part of my wesite. If people want to view some webpages, they have to use their name and password first. I will give out the password in person. What's the best way of approaching it using Zope? Thanks for your time. Justin

3 2

Plone Newsgroups
by hpinson＠indepthl.com 05 Nov '03

05 Nov '03

Can anyone direct me to a searchable archive of the Plone newsgroups? Harlow Pinson Indepth Learning Email: hpinson(a)indepthl.com Web: http://www.indepthl.com Voice: 505-994-2135 FAX: 208-475-7678

2 1

plone states
by Wilson, Derek 04 Nov '03

04 Nov '03

I am having issues with plone states. Let's say for instance that I have an intranet website. I have certain content that I want only authenticated persons to view. I also want certain things to be viewed by anonymous. I have created another state, called "apublished" and selected "view" for authenticated users, and unchecked it for "acquire" and "anonymous". Now, supposedly, if something is in that state, only authenticated persons can view that content. However, it is still accessible to anonymous. Any ideas? Thanks, Derek S. Wilson *****HIPAA Confidentiality Notice***** The documents inside this electronic transmission contain confidential information belonging to the sender that is legally privileged. This information is intended only for the use of the individual or entity named above. The authorized recipient of this information is prohibited from disclosing this information to any other party and is required to destroy the information after its stated need has been fulfilled, unless otherwise required by law. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of these documents is strictly prohibited. If you received this electronic transmission in error, please notify the sender immediately to arrange for return.

1 0

[NEWBIE] Help getting started w/authentication
by Michael Russell 04 Nov '03

04 Nov '03

Hi, I'm using Zope 2.6.1 under Plone 2.5. I'm trying to set up certain folders so that certain users can only access those folders. Reading the Zope book, it seems as though I should be able to do this simply by creating a new User Folder in that folder, and adding users to it. I've done this, as well as adding a Cookie Crumbler. However, the users I add can't log in. The folder is a published folder, so I go straight to that folder, enter the username and password as I've set them up in the acl_users folder at that level, but it tells me a "Sign-in failure" page. Do I also have to have the user defined at the Root level? Thanks, Michael _________________________________________________________________ Send a QuickGreet with MSN Messenger http://www.msnmessenger-download.com/tracking/cdp_games

2 1

ZSyncer problem
by Marcel Maré 04 Nov '03

04 Nov '03

I could use some help setting up ZSyncer (0.5.0-pre10). This what I've done so far: I have two instances running of Zope running on my local Windows box, one on port 8080 and one on 9090. Admin user is identical in both. Installed ZSyncer product on both. Added a ZSyncer instance called 'mysync' in the root of both. In both instances I've set the properties like this: Title=empty Destinations= http://localhost:8080/mysync on the instance running on 9090 http://localhost:9090/mysync on the instance running on 8080 Log=off Override user=off Filter types=off Then I go to a folder called 'Experiments' on one instance, click on the sync tab expecting it to work, but no. I get this error: Fault <Fault -2: 'Unexpected Zope error value: NotFound - \\Experiments'> Traceback (most recent call last): File "C:\devel\python\Plone\Zope\lib\python\DocumentTemplate\DT_Try.py", line 149, in render_try_except result = render_blocks(self.section, md) File "C:\devel\python\Plone\Zope\lib\python\DocumentTemplate\DT_Util.py", line 201, in eval return eval(code, d) File "", line 0, in ? File "C:\devel\python\Plone\Zope\lib\python\Products\ZSyncer\ZSyncer.py", line 205, in manage_compare return self._manage_compare_path(path, recurse=0) File "C:\devel\python\Plone\Zope\lib\python\Products\ZSyncer\ZSyncer.py", line 467, in _manage_compare_path d_dict = self._get_list(self.dest_server[0], path) File "C:\devel\python\Plone\Zope\lib\python\Products\ZSyncer\ZSyncer.py", line 393, in _get_list return serverconn.manage_listObjects(folder) File "C:\devel\python\Plone\Zope\lib\python\xmlrpclib.py", line 829, in __call__ return self.__send(self.__name, args) File "C:\devel\python\Plone\Zope\lib\python\xmlrpclib.py", line 983, in __request verbose=self.__verbose File "C:\devel\python\Plone\Zope\lib\python\Products\ZSyncer\xmlrpclibBasicAuth.p y", line 65, in request return self.parse_response(file) File "C:\devel\python\Plone\Zope\lib\python\xmlrpclib.py", line 904, in parse_response return u.close() File "C:\devel\python\Plone\Zope\lib\python\xmlrpclib.py", line 579, in close raise apply(Fault, (), self._stack[0]) Fault: Any hints?? TIA Marcel

2 2

IIS/Zope rewrite problem -- .../VirtualHostRoot/_vh_path/ is no t appending "path"
by Jason LeMonier 04 Nov '03

04 Nov '03

Hey, Have Plone & IIS integrated. Thanks to this article: http://www.zope.org/Members/hiperlogica/ASP404 <http://www.zope.org/Members/hiperlogica/ASP404> Beta 2 In the default.asp: The vhmURL ends up as: " http://172.16.1.78:8810/VirtualHostBase/http/bp.retailpro.com:80/VirtualHost Root/_vh_newbpsite/ <http://172.16.1.78:8810/VirtualHostBase/http/bp.retailpro.com:80/VirtualHos tRoot/_vh_newbpsite/> " but NO urls get: newbpsite appended to: http://bp.retailpro.com <http://bp.retailpro.com> any help is appreciated!! Jason LeMonier Software Engineer Retail Technologies International Office 916.605.7262 Mobile 415.595.0969 Fax 916-914-2132 jlemonier(a)RetailPro.com

2 1