- Zope - Zope lists

adding an image
by Montagne, Michael 11 Oct '01

11 Oct '01

I need to add lots of images to my ZODB. I will use a ZSQL method to walk the staff list and build the file names to import. I will then pass this file like this: <dtml-call "manage_addImage('100_m','M:\\Officeweb\\photos\\100_M.jpg','100_m')"> But that doesn't import the image. It creates the object with a title and id but there is no image. i'm sure it is there and if I import it using the management screen it works just fine. What am I missing? -mjm

1 0

RE: [Zope] Python LFS help needed (sorry if OT)
by Gitte Wange 11 Oct '01

11 Oct '01

-----Original Message----- From: Hannu Krosing [SMTP:hannu@tm.ee] Sent: 11. oktober 2001 19:13 To: gitte(a)mmmanager.org Cc: 'zope(a)zope.org' Subject: Re: [Zope] Python LFS help needed (sorry if OT) Gitte Wange wrote: > > Hello, > > We have tried to recompile python so it gets LFS the entire night - without success .. > > I was just wondering (and hoping) that perhaps someone out there might have a python compiled with LFS that we could install from ?? > Sorry, but what is LFS ? ---------- Hannu LFS = Large File Support Gitte

1 0

RE: [Zope] Can Zope 2.4.0 be run "naked" (withoutApache/Squid/IIS)?
by Frank I. Reiter 11 Oct '01

11 Oct '01

> From: Jim Penny [mailto:jpenny@universal-fasteners.com] > > No. Generally, in recent times, zope is run behind an apache or > apache-ssl which uses mod_rewrite or mod_proxy rules to determine > which content to deliver to zope. > From: Chris McDonough [mailto:chrism@zope.com] > > Zope *can* be used as a CGI but it's uncommon. Usually, PCGI or > FastCGI is used Thanks guys - I'll do some research on the modules mentioned. Frank. ----- The very act of seeking sets something in motion to meet us; something in the universe, or in the unconscious responds as if to an invitation. - Jean Shinoda Bolen

1 0

Can Zope 2.4.0 be run "naked" (without Apache/Squid/IIS)?
by abg＠comco-inc.com 11 Oct '01

11 Oct '01

On the "Zope Changes" page for Zope 2.4.0 (http://www.zope.org/Products/Zope/2.4.0/CHANGES.txt) one of the changes mentioned is "Fixed handling of invalid HTTP requests." One of the main arguments (as I understood them) for running Zope behind Apache/Squid/IIS was that Zope was susceptible to denial of service attacks due to the way it handled HTTP requests. The Apache/Squid/IIS front-end was used to sanitize the HTTP request. Does the change made with the release of 2.4.0 fix this problem? If so, what other roadblocks are there to running Zope "naked"? Thanks, Aaron Gillette abg(a)comco-inc.com

7 6

an idea for TextAreaEditor
by Dirk Datzert 11 Oct '01

11 Oct '01

Hello Kedai, (since I can't reach you thru your email adress I write to the zope-mailing list and hope that you will listen to them) I've downloaded the TextAreaEditor last week. I found today that it would be nice if a manager could select if an user sees a special button or not. Is that an idea you would agree ? I've modify the DHTML todo so. There is an new Array onoff which could be filled by new dtml boolean properties; switch a button will be seen or not. Also I had put a new justify-full button. Tell me if you want this in your project. You can safe the attachments on disk an take a look with IE without ZOPE. Another idea would be an international version. The toolbar attached is a german version. Regards, Dirk

1 0

Windows Internet Explorer login into Zope
by Heimo Laukkanen 11 Oct '01

11 Oct '01

I have been building an extranet for a client with Zope and now stumbled in a login problem with a couple of users who have Internet Explorer installed on their windows 2000-laptops. Version of the browser is 5.5 - as far as the users can tell. I have no access to the users computers and from time to time only guide them in phone, if they have massive problems. In the extranet we use 128-bit encryption and users are authenticated from mysqlUserFolder, since passwords are changed daily. All the bits and pieces of the extranet are not programmed in Zope, but also in php. These php-applications get authentication data from the mysql-database tables that are shared with mysqlUserFolder. Authentication method is http basic authentication. But now to the problems that users have faced so far. If you can help at all or can guide me to more information. 1) Unable to connect at all - not even authentication requests to the screen I am writing guide to the users and the points so far are - check if there is connection at all to internet - basic http-connection to our public server - if browser has 128-bit security ( Help -> About Internet Explorer ) - download newer IE or high security pack - internet settings from internet explorer ( Tools -> Internet Options ) - Security, use Fortezza, SSL 2.0, SSL 3.0 - What else should be checked in these options? 2) Authentication is asked multiple times when connecting to Zope User can get a login screen, but after writing correct username and password login screen pops up again. When user types in the password again, he/she gets to the frontpage, but when he/she clicks a link login screen pops up again. If user types in the password, everything migth work ok. Sometimes it seems that checking 'Save password in password list'-migth help. Debugging the authentication problem is real hard work - and for me the log-files don't seem to bring any enligthment. Apache log don't show anything unusual and zope log doesn't show anything unusual either. And the good part is that only the users who are far far far away have these problems. ,-) -huima

1 0

IOerror !!!
by Hamzat kamal 11 Oct '01

11 Oct '01

Hi All, Below error msg is what i get each time i try to use Zsql method to insert values in to my table fields. I was using Z Gadfly Database connection. Error Type: IOError Error Value: [Errno 9] Bad file descriptor Thanks

1 0

RE: [Zope] Data.fs 2GB problem ...
by sean.upton＠uniontrib.com 11 Oct '01

11 Oct '01

I suppose you might have to know for sure that you have a compliant filesystem, and then hack the Makefile created by ./configure? Sean -----Original Message----- From: Gitte Wange [mailto:gitte@mmmanager.org] Sent: Thursday, October 11, 2001 10:09 AM To: Takashi Linzbichler Cc: Zope mailinglist Subject: Re: [Zope] Data.fs 2GB problem ... tor, 2001-10-11 kl. 18:54 skrev Takashi Linzbichler: > Gitte Wange wrote: > > > > > No I don't think so. We are using ext2 but the problem could be the > > > > python interprenter as Andreas mentioned .. > > > > > > Not sure about that. If you're using ext2 and a Kernel < 2.4.x or a > > > fIlesystem created under a Kernel < 2.4.x, you're quite out of luck, > > > sorry to say that. Check the list-archives for further infos. > > > > Sorry but will you please explain that ?? > > > > We are using Mandrake 8.0 on our server so yes we have a kernel > 2.4.x > > running ... > > And our filesystem is created under that kernel .. > > OK. I have absolutly no experience with Mandrake, so I can't tell, what > they're doing ... > But as far as I can see from what you've written, you should not run > into troubles as far as the OS is concerned. > > I _guess_, if you're following Anreas' advice and reinstall Python with > LFS, everything should be fine. > > ta Well we just looked into the sources of python and looked at the configure file ... and it has a check whether the system it runs on supports LF ... and this one returns with a big NO ! :-(((( Is there someway I can test if our system supports LFS ??? -- Gitte Wange Jensen Sys Admin, Developer and a lot more MMmanager.org Aps, Denmark Phone: +45 29 72 79 72 Email: gitte(a)mmmanager.org Web: www.mmmanager.org Quote of the day: Bare fordi at grunden til at jeg bruger Linux er, at det er det eneste system der er brugervenligt nok til mig? _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Python LFS help needed (sorry if OT)
by Gitte Wange 11 Oct '01

11 Oct '01

Hello, We have tried to recompile python so it gets LFS the entire night - without success .. I was just wondering (and hoping) that perhaps someone out there might have a python compiled with LFS that we could install from ?? TIA, Gitte Wange

3 2

Question
by Scott Kuei 11 Oct '01

11 Oct '01

Hi, So what kind of object I have to create in order to use the addImage function of Image.py in CMFDefault? Or what is the proper way(s) of using the addImage function of Image.py in CMFDefault? Thank you. Scott,

1 0