- Zope - Zope lists

newbie needs advice on where to use zope
by Sells, Fred 13 Apr '06

13 Apr '06

I realize that to a man with a hammer, every problem is a nail, but... I've been tasked to produce ~50page contracts with a little dynamic information inserted into the appropriate fields. This will run on a linux server and must generate PDF files. These contracts actually consist of multiple packets, with different signature and distribution requirements. Parts of the contract will vary from state to state. I originally did this job a year ago using xml, xslt and fop. While that worked well, it required that all changes had to come to me and then I would edit the xml. While that does lead to job security, it's not the type of job I would like to secure ;) I am receiving the boilerplate in OpenOffice format. and was considering using the python UNO bridge to openoffice or a mailmerge script. Although I have not used OpenOffice before, it is one of our company standards. Part of the problem is that the dynamic data resides in a legacy system that can only be accessed via HTTP. Also these contracts will be done individually, as required at our various field facilities. Furthermore I have little freedom to change appearance, due to various ~legal issues. So after all that rambling, Is Zope a viable tool or am I killing a gnat with a cannon? I have installed both zope and plone in the past, but never used them for more than playing around, so I am concerned about the learning curve. One thing that did appeal to me was that there needs to be a formal approval cycle for changes to the boilerplate, and I seem to recall that Zope is good at that. Are there any prebuilt freebie zope applications that would give me a head start, or any good starting points in general. I'm very familiar with Python. --------------------------------------------------------------------------- The information contained in this message may be privileged and / or confidential and protected from disclosure. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the sender immediately by replying to this message and deleting the material from any computer. ---------------------------------------------------------------------------

2 1

RE: [Zope] ExtFile and TextIndexNG issues
by Palermo, Tom 13 Apr '06

13 Apr '06

Stefan, Thanks very very much for your help. I just installed ExtFile 1.5 updated with some extra properties I had added to my ExtFile 1.4.4. It works nicely. All of my ExtFile objects are getting catalogged along with some custom content types I created. I just added a txng_get method to those. Very easy. Looks like calls to index_object and reindex_object work fine too. I was getting nervous that I wouldn't be able to do full-text indexing on pdfs, word, etc. but now it looks like everything is all good. Thanks, Tom Palermo -----Original Message----- From: Stefan H. Holek [mailto:stefan@epy.co.at] Sent: Wednesday, April 12, 2006 4:06 AM To: Palermo, Tom Cc: 'zope(a)zope.org' Subject: Re: [Zope] ExtFile and TextIndexNG issues This however is *exactly* the problem. Please use 1.5. ExtFile 1.4.4's index_html writes to the request regardless of how it was called (by publisher or script). Stefan On 11. Apr 2006, at 19:24, Palermo, Tom wrote: > I haven't tried upgrading to ExtFile 1.5 from the svn trunk yet but I > really don't think that's the problem. I'm going to try that next > (upgrading to ExtFile 1.5). Does anyone have any ideas about what > would cause the ExtFile to launch instead of just get catalogged? -- Anything that happens, happens. --Douglas Adams

1 0

creating users in zope. Login error
by JulianRead 13 Apr '06

13 Apr '06

Hi i have created a plone site and now i want to create a user using zope and give them ownership rights to plone. At the moment i have created a user using the acl users button on the left menu bar and given them ownership rights Once i have created the user i am unable to log into zope using them. Does anyone know how to giv my newly created user the abillity to login. -- View this message in context: http://www.nabble.com/creating-users-in-zope.-Login-error-t1437063.html#a38… Sent from the Zope - General forum at Nabble.com.

3 2

TAL page whitespace removal
by Robert (Jamie) Munro 13 Apr '06

13 Apr '06

Due to the structure of TAL, the output of TAL pages often includes a lot of whitespace that are added to make the source readable, but once processed the lines they are on can disappear completely. It would be nice if the TAL parser had an option that could remove all whitespace at the beginning and end of lines, and remove all blank lines. For example, I downloaded the www.plone.org home page and it was 47704 bytes. I removed all whitespace from the beginning and end of lines, and then removed blank lines, and it was down to 35087 bytes - that's a more than 25% saving, and the output renders exactly the same in web browsers. This saving will improve load times for the end user, both by being less to download and less for their browser to hold in memory. For the server, the improvements are huge. Obviously less bandwidth is required, but also less space will be needed in the various caches meaning the caches will expire less, and/or be equally functional will less RAM or disc space. The ability to switch off this feature and leave whitespace in for debugging may be useful, but not very, because you can always use an XML indenting tool to get readable output from TAL. Robert (Jamie) Munro

5 8

getting error in export and import on zope2.9
by shivayogi kumbar 13 Apr '06

13 Apr '06

I am trying to import file from zope2.9 that has been exported in xml format from the same.I am getting error as follows. " Site Error An error was encountered while publishing this resource. Error Type: UnicodeDecodeError Error Value: 'ascii' codec can't decode byte 0x83 in position 10: ordinal not in range(128)" -- regards Shiv -- regards Shiv

3 3

calling a product with xmlrpc
by Reinoud van Leeuwen 12 Apr '06

12 Apr '06

Hi, I have a working Pyhton script to search for users in a plone site with a commandline xmlrpc client. It cannot be changed into an external method because of the fact that it only works when running under a role with sufficient rights. So I turned it into a product. Basically I have (I have deleted some obvious code): class Xmlrpcindex(UniqueObject, SimpleItem): security = ClassSecurityInfo() security.declarePublic('search') def search (self, SearchableText): return 'foobar' The product is recignized as a Zope product and Plone product. It is installed in my Plone instance and I have made an instance in my Plone root (with id my_xmlrpc_instance). So the client looks like this: import xmlrpclib server = xmlrpclib.Server('http://localhost/plonesite/my_xmlrpc_instance') results = server.search('sometext') This however generates a NotFound Exception :-( Am I doing something elementary wrong? Should I call the search method in another way? >From the ZMI error log: User Name (User Id) Anonymous User (None) Request URL http://localhost/plonesite/my_xmlrpc_instance/search Exception Type NotFound Exception Value http://localhost/plonesite/my_xmlrpc_instance/search Traceback (innermost last): * Module ZPublisher.Publish, line 92, in publish * Module ZPublisher.BaseRequest, line 344, in traverse * Module ZPublisher.HTTPResponse, line 640, in debugError -- __________________________________________________ "Nothing is as subjective as reality" Reinoud van Leeuwen reinoud.v(a)n.leeuwen.net http://www.xs4all.nl/~reinoud __________________________________________________

5 7

where's the XML?
by Erik Myllymaki 12 Apr '06

12 Apr '06

I want to access numerous methods/functions on a zope server via Javascript. Zope has xml "built-in" right? So must I write my own XML output? For now, I wrap the existing functions like so: <?xml version="1.0" encoding="utf-8" ?> <ajaxresponse xmlns:tal="http://xml.zope.org/namespaces/tal" > <response type="object" id="clientDetails"> <client tal:repeat="row python:here.client_lookup(clientid=request.clientid)"> <fname tal:content="python:row.fname1">fname1</fname> <lname tal:content="python:row.lname1">lname1</lname> </client> </response> </ajaxresponse> I know i'm missing the obvious here so please, somebody, hit me over the head with it. Thanks.

3 2

Css product
by Garito 12 Apr '06

12 Apr '06

Hi all! Do you know any product for css that works with zope 2.9.1? I try to use ZStyleSheet product but seems doesn't work on this version of Zope What I'm trying to know is all the styles on my css objects (or files) to pass them to the WYSIWYG editor Is this possible? Thanks in advance! -- Mis Cosas http://blogs.sistes.net/Garito/

1 0

same object in different containers
by gf 12 Apr '06

12 Apr '06

Hi, I am interested in having the same object appear as the child of two different containers. These containers may distant from each other in the object hierarchy. In particular, I autogenerate a list of subtopics (child folders) for several areas of my website, but would like a certain folder to appear in more that one listing because it can be classified in multiple ways. Is there a way to accomplish this? Is there anything in Zope like a symbolic link? Thank you for any advice or hints that you can provide. Best Regards, gyro

3 3

RE: [Zope] ExtFile and TextIndexNG issues
by Palermo, Tom 12 Apr '06

12 Apr '06

Ooooohhhhh. Thanks :-) -Tom Palermo -----Original Message----- From: Stefan H. Holek [mailto:stefan@epy.co.at] Sent: Wednesday, April 12, 2006 4:06 AM To: Palermo, Tom Cc: 'zope(a)zope.org' Subject: Re: [Zope] ExtFile and TextIndexNG issues This however is *exactly* the problem. Please use 1.5. ExtFile 1.4.4's index_html writes to the request regardless of how it was called (by publisher or script). Stefan On 11. Apr 2006, at 19:24, Palermo, Tom wrote: > I haven't tried upgrading to ExtFile 1.5 from the svn trunk yet but I > really don't think that's the problem. I'm going to try that next > (upgrading to ExtFile 1.5). Does anyone have any ideas about what > would cause the ExtFile to launch instead of just get catalogged? -- Anything that happens, happens. --Douglas Adams

1 0