- Zope - Zope lists

apache open proxy configuration problem
by Ed Colmar 14 Oct '05

14 Oct '05

I've been running zope through apache for years and years now, and I have a new machine set up with apache 2.0.48 and zope (Zope 2.8.0-final, python 2.3.5, linux2) Using Identical Vhost configuration settings from an old machine all has been well, up until about 5 days ago, when I noticed the machine getting slammed, and wierd logs started showing up like: xxx.xxx.xxx.xxx - - [14/Oct/2005:14:09:06 -0700] "GET http://partners.mygeek.com:80/search.jsp?partnerid=98885&pagesize=12 HTTP/1.1" 403 406 (IP removed to protect the guilty) In my quick research to try to determine the problem, I found people advising to turn "ProxyRequests Off", which I did, but did not have any effect. Luckily this is just a development server, not a live production server, so its not super critical, but I'm nervous now that my production server might be in the same state... Here is a sample vhost.conf entry: NameVirtualHost 192.168.1.32 <VirtualHost 192.168.1.32> ServerName www.greengraphics.net ServerPath /var/www/greengraphics/www DocumentRoot /var/www/greengraphics/www ServerAdmin webmaster RewriteEngine On TransferLog logs/Vhost-greengraphics-access.log ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / http://192.168.1.32:8080/VirtualHostBase/http/www.greengraphics.net:80/gree… ProxyPassReverse / http://192.168.1.32:8080/VirtualHostBase/http/www.greengraphics.net:80/gree… </VirtualHost> mod_proxy.conf looks like: <IfDefine HAVE_PROXY> <IfModule !mod_proxy.c> LoadModule proxy_module modules/mod_proxy.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so </IfModule> </IfDefine> <IfModule mod_proxy.c> # # Proxy Server directives. Uncomment the following lines to # enable the proxy server: # ProxyRequests Off <Proxy *> Order deny,allow Deny from all # Allow from .your-domain.com </Proxy> # # Enable/disable the handling of HTTP/1.1 "Via:" headers. # ("Full" adds the server version; "Block" removes all outgoing Via: headers) # Set to one of: Off | On | Full | Block # ProxyVia On # End of proxy directives. </IfModule> any suggestions? places to look to verify security? Thanks! -ed

1 0

Backing up Zope
by curtorkar＠sancharnet.in 14 Oct '05

14 Oct '05

Hi, Can anyone advise me on backing up zope. Our license is going to expire soon, and before we get the new license, I would like to have a backup of my existing setup. --Walter

3 2

error trying to import smtplib (unauthorized)
by Nicolas Georgakopoulos 14 Oct '05

14 Oct '05

Trying to execute the following code from a python script from smtplib import SMTP from email.MIMEText import MIMEText I get a error: *Error Type: ImportError* *Error Value: import of "SMTP" from "smtplib" is unauthorized. You are not allowed to access 'SMTP' in this context * Why I can't access SMTP if I am a user manager with all the access enabled for managers in the current context ?

4 12

Re: Zope 2.8.2 released
by Paul Winkler 14 Oct '05

14 Oct '05

On 10/14/05, Andreas Jung <andreas(a)andreas-jung.com> wrote: > > OK, done for 2.8 branch. But I'm leaving the trunk alone, as it looks > > like lots of stuff from 2.8 is not yet in the trunk CHANGES.txt, > > and I don't want to confuse things further - AFAICT the normal procedure > > is to let the release manager handle the merging of bugfixes in > > CHANGES.txt. > > > > It is basically up to the guy fixing stuff to update CHANGES.txt as well. > I can not be after every single checkin messages..... > Of course. But http://www.zope.org/DevHome/Subversion/ZopeDevelopmentProcess says: "When you check in a bug fix, you almost always need to ,,, Note the fix in the /doc/CHANGES.txt on the current release branch ... Note that you don't need to note the fix in the CHANGES.txt on the trunk if you don't want to. At the time a new feature release is made, we merge the items in CHANGES.txt from the trunk and current release branch ..." And in this case you are the guy who applied the patch to the trunk, so I assumed you were satisfied. If you want me to note it on the trunk, I will. Is that too much of a pain for the release manager? Should ZopeDevelopmentProcess be changed? -- http://www.slinkp.com

1 0

ZOPE and INSTANCES
by benmania＠web.de 14 Oct '05

14 Oct '05

Hi guys, I installed Zope2.7 and created an instance home in /var/lib/zope2.7/instance But whenever I try to run a instance by using "runzope" in /var/lib/zope2.7/instance/, I will get the following error: ------------------ -bash: runzope: command not found. ------------------ Whenever I try to run the server on the instance, I ll get the following error: ------------------ failed: missing required path(/var/lib/zop/cgi-bin/default) Waiting instances in late: donae default: start: missing required path(/var/lib/zop/cgi-bin/default) ------------------ ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

3 2

Zope 2.7.8 or Zope 2.8.X
by Dennis Allison 14 Oct '05

14 Oct '05

We have been running on Zope 2.7.6 with a few patches. I am now planning to migrate to Zope 2.7.8 but am pondering the move to Zope 2.8. We are in a production situation and cannot accept any downtime, so I am very concerned about stability and compatibility. Can the list provide words of advice?

7 6

Re: [Zope] Zope Debugger lets WingDbg fail to connect toclient
by Chris Withers 14 Oct '05

14 Oct '05

Wingware Support wrote: > > Because Wing currently doesn't read files from anywhere but the file > system. I have looked briefly at zdb, but have not had time to set it > up yet. Man, you are short of time ;-) > Wing's debugger does not use pdb or even the linecache module, > so zdb's technique of pre-filling the line cache isn't applicable. That's a shame, you should be able to use something similar though... > Since you also have a need for the co_filename attribute to be set, I > suggest we try to come up with a monkey patch that we can both use and > not conflict with each other. Yep :-) I don't have Wing, so I can't try WingDbg, but if you could stick zdb and WingDbg in the same Zope instance and see what zdb is stomping on that's stopping WingDbg working, then I'll see what I can do.. > I still think even better would be to get > a change into Zope so monkey patches aren't required. Well, zdb adds overhead, so I'd never want its stuff to be intergated... cheers, Chris -- Simplistix - Content Management, Zope & Python Consulting - http://www.simplistix.co.uk

1 0

Re: [Zope] error trying to import smtplib (unauthorized)
by Jens Vagelpohl 14 Oct '05

14 Oct '05

On 14 Oct 2005, at 11:02, Nicolas Georgakopoulos wrote: >> VerboseSecurity is *integrated* into Zope after 2.8, you don't >> install it separately. You enable it in zope.conf, see the >> "verbose- security" option. >> >> jens >> >> > Thank's Jens I didn't know that. I find it "verbose- security" > option in the zope.conf only as an example. Where and how exactly > you change that? Please stay on the list. If you want a personal helpdesk I'm glad to do it, for money. The option is not "only as an example", it is commented out and thus deactivated. Uncomment it. jens

1 0

Show ISO-8859-7 Results in a site using UTF-8
by Thomas G. Apostolou 14 Oct '05

14 Oct '05

Hello all, i am using Zope 2.7.0 and i get some results from SQL Server 2000 with a python module's fanction witch i call from with in a DTML Method. The data is comming encoded in ISO-8859-7 (probably due to database setup). I changed the setting of the default encoding from ZMI to ISO-8859-7 for the entiry site because of the data (temporarly) but now the same tings has to be transfered and be part of another site using UTF-8. Any help would be very nice! Thanks in advance! PS:Newbie... just tranfering myself from DTML to PT. Thomas G. Apostolou Software Engineer Θωμάς Γ. Αποστόλου Μηχανικός Λογισμικού

3 3

Problem with strftime.
by Jason C. Leach 14 Oct '05

14 Oct '05

Hi: If I use this line in a Python script: print row['end_date'], row['end_date'].strftime('%d') I get: 2005/10/13 12 You can see the day is out by one. Should be 13, but is gets converted as 12. So I'm curious what's up with that? Zope Version (Zope 2.8.1-final, python 2.4.0, freebsd5) Python Version 2.4 (#2, Aug 25 2005, 15:17:08) [GCC 3.4.2 [FreeBSD] 20040728] Thanks, Jason. -- ........................................ .... Jason C. Leach .... PGP Key: 0x62DDDF75 .... Keyserver: gpg.mit.edu

2 1