- Zope - Zope lists

Re: [Zope] Help with virtual hosting Zope on different ports
by Michael Sanborn 29 Sep '05

29 Sep '05

I was a little reluctant to try this, since I'm not that agile with installing unix applications, but I gave it a shot. It actually wasn't that hard to install, and the performance difference it makes on my rickety old box is astonishing! Thank you very much for this tip! Jonathan Cyr wrote: > Unless you need some special Apache functionality, you may want to look and the Pound Rev-Proxy/Load Balancer at http://www.apsis.ch/pound. I find it much easier than getting involved with apache, it's lightweight, secure and designed with Zope in mind. > > two cents, > > -Jon. > > Michael Sanborn wrote: >>I have two Zope versions running behind Apache 1.3 (on FreeBSD 4) >>using different ports on the same server. The only domain name >>currently assigned to the server is for a Squishdot site on the older >>Zope version (2.5.1) that I haven't been able to upgrade, and I don't >>want to spend the time figuring it out right now. The newer Zope >>version (2.8.1) has a Plone site that I would like to run as a domain >>of its own. >> >>Can someone help me figure out the combination of Apache rewrite rules >>and Zope/Plone products I would need to use to accomplish this? >> >>Just to try to make it clear, what I want is: >> >>request: oldsite.com >>result: myserver:8093/oldsite >> >>request: newsite.com >>result: myserver:8580/newsite >> >>This is possible, isn't it? >> >>If it helps, here are the existing rewrite rules: >> >><VirtualHost oldsite.com> >>ServerName oldsite.com >>ServerAdmin webmaster(a)oldsite.com >>DocumentRoot /u2/oldsite >>ScriptAlias /cgi-bin/ /u2/oldsite.cgi-bin/ >>RewriteEngine on >>RewriteCond %{HTTP:Authorization} ^(.*) >>RewriteRule ^/(oldsite/)?(.*) /usr/local/Zope/Zope.cgi/oldsite/$2 >>[e=HTTP_CGI_AUTHORIZATION:%2,t=application/x-httpd-cgi,l] >>ErrorLog /u2/oldsite.admin/oldsite.errors >>TransferLog /u2/oldsite.admin/oldsite.access >></VirtualHost> >> >><VirtualHost www.oldsite.com> >>ServerName www.oldsite.com >>ServerAdmin webmaster(a)oldsite.com >>DocumentRoot /u2/oldsite >>ScriptAlias /cgi-bin/ /u2/oldsite.cgi-bin/ >>RewriteEngine on >>RewriteCond %{HTTP:Authorization} ^(.*) >>RewriteRule ^/(oldsite/)?(.*) /usr/local/Zope/Zope.cgi/oldsite/$2 >>[e=HTTP_CGI_AUTHORIZATION:%2,t=application/x-httpd-cgi,l] >>ErrorLog /u2/oldsite.admin/oldsite.errors >>TransferLog /u2/oldsite.admin/oldsite.access >></VirtualHost> >> >>Thanks in advance for any assistance, >> >>Michael Sanborn

1 0

Page Template security problem
by Chris Beaven 29 Sep '05

29 Sep '05

I'm having a problem figuring out how to keep things secure while allowing a proxied script to call a page template correctly. /details/sendDetails Python script that is publicly available, receives an email address and sends that person thier details stored in the database. The script has proxy rights of "Administrator". /admin/person/emaildetails.htm Page template that is secured (admin folder is Administrator only for "view" and "access contents information"). The anonymous user is prompted for authentication. If I change emaildetails.htm to a simple "test" text file it works, the problem seems to lie when the template tries to access any script from the context. I tried to give those scripts proxy rights too but that had no effect. Am I going about this the wrong way, is there something I missed, or am I just going to have to revert to rewriting the whole details.htm as DTML?

3 3

logging out (not zmi)
by paul.hendrick＠gmail.com 28 Sep '05

28 Sep '05

Hi all, If i'm logged in as testuser and want to log in with a different user name, whats the right way of doing it? this is on zope 2.7 thanks paul

5 4

Re: [Zope] ZOPE and DEBIAN INSTALLTION
by Benmania Guin 28 Sep '05

28 Sep '05

Yes. It was more a general question. I actually used the DEBIAN Version 'cause when I installed it, you had not sent your answer.- I am wondering whether everything will work properly if I have two servers both an apache AND Zope running. I distinguish them by ports - the "normal" 80 PORT for Zope (for all HTTP requests) and Apache using all other ports (using it as a mailserver and stuff). Besides that, if I want to deinstall the old ZOPE version, is it possible to simply delete simply all files or is there any special deinstallation process? Benjamin Peter Bengtsson <peter(a)fry-it.com> schrieb am 28.09.05 18:51:58: > > If you're going to be using this lovely little zope instance I advice > you to stay away from debian packages and do it with custom binary > installations. I use debian for all my other programs but zope is what > I do for a living so I'm not satisfied with the deb package way of > doing it. > And if you're going to take take you're zope "more seriously" I > suggest you have a read in some of the documentation about how to > manage a zope instance. > http://www.plope.com/Books/2_7Edition/InstallingZope.stx#3-64 > > If you're not in the mood for reading some instructions, just edit the > file etc/zope.conf (you find it) and look for where it says > <http-server> > # valid keys are "address" and "force-connection-close" > address 8080 > # force-connection-close on > </http-server> > > Change that to: > <http-server> > # valid keys are "address" and "force-connection-close" > address 80 > # force-connection-close on > </http-server> > > 2005/9/28, Benmania Guin <benmania(a)web.de>: > > > > Hi, > > > > I successfully installed ZOPE on my VServer which has an DEBIAN op. > > I want to change ports now in order to have access via a "normal" HTTP request. > > How do I change ports and what port is the right one? > > > > Benjamin > > ______________________________________________________________ > > Verschicken Sie romantische, coole und witzige Bilder per SMS! > > Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193 > > > > _______________________________________________ > > Zope maillist - Zope(a)zope.org > > http://mail.zope.org/mailman/listinfo/zope > > ** No cross posts or HTML encoding! ** > > (Related lists - > > http://mail.zope.org/mailman/listinfo/zope-announce > > http://mail.zope.org/mailman/listinfo/zope-dev ) > > > > > -- > Peter Bengtsson, > work www.fry-it.com > home www.peterbe.com > hobby www.issuetrackerproduct.com ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

3 2

ZOPE and DEBIAN INSTALLTION
by Benmania Guin 28 Sep '05

28 Sep '05

Hi, I successfully installed ZOPE on my VServer which has an DEBIAN op. I want to change ports now in order to have access via a "normal" HTTP request. How do I change ports and what port is the right one? Benjamin ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193

2 1

Re: [Zope] possible to do /search/ over multiple zope instance homes?
by chris_beaumont＠ncafe.com 28 Sep '05

28 Sep '05

Dear Chris, This is not the only answer, but I think its a good one. If you take care to use the absolute_url() function to generate URLs you can easily use a standalone web search tool like htdig, running under Apache, to spider all of your visble content, and provide unified search results across any number of hosts or even domains. Its a hack, but it has some advantages - like being super easy to set up, and only showing linked, 'viewable-by-Anonymous users' content by default. Chris seberino(a)spawar.navy.mil wrote .. > possible to do *search* over multiple zope instance homes? > > (In case I can't merge 2 zope instance homes together?) > > chris

1 0

Any hope of *merging* 2 'zope instance home's ??
by seberino＠spawar.navy.mil 28 Sep '05

28 Sep '05

I have 2 Zope/Plone sites each with their own 'zope instance home'. Any hope of *merging* these into *ONE* zope instance home so that I can do /search/ over both??? How merge both Data.fs's? Thanks! Chris

2 1

including a ZPT inside a repeat loop
by Matthew White 28 Sep '05

28 Sep '05

Hello, I've got this following bit of ZPT: <tal:loop repeat="t container.py.get_queue(whence=q, userid=userid))"> <span tal:replace="structure here/queue_template"> Queue Template Goes Here </span> within queue_template I reference the "t" loop variable. Unfortunately this fails with a KeyError, which I'm guessing is because "t" isn't available to the "queue_template" ZPT. Is there a way to make "t" available to "queue_template"? -mtw -- Matthew White - District Systems Administrator Tigard/Tualatin School District 503.431.4128 "The greatest thing in this world is not so much where we are, but in what direction we are moving." -Oliver Wendell Holmes

4 4

possible to do /search/ over multiple zope instance homes?
by seberino＠spawar.navy.mil 28 Sep '05

28 Sep '05

possible to do *search* over multiple zope instance homes? (In case I can't merge 2 zope instance homes together?) chris

1 0

date problem
by tyson 27 Sep '05

27 Sep '05

The date is actually coming from a postgresql database. I checked the zope.conf file, and it's set for "us". Now that you mentioned that, I tried creating a variable within dtml and when I do that, it works just fine. Now I guess I'm looking at a postgresql problem!

1 0