- Zope - Zope lists

Re: [Zope] Perchance a dtml major mode for XEmacs?
by Alastair Burt 03 Mar '00

03 Mar '00

The link below explains how I managed to create such a beast: http://www.zope.org/Members/alburt/dtml_mode It relies on a DTD file to define the format of DTML code and then letting PSGML, a package for editing SGML/XML code, do all the work. --- Alastair Burt

1 0

RE: [Zope] Changing superuser password (Quest)
by Oscar Picasso 03 Mar '00

03 Mar '00

Thanks. That's right, I didn't write the username thinking the default was superuser. Inserting it made my change bcome effective. On Fri, 03 Mar 2000, DSirrine(a)mcleodco.com wrote: > Are you using the syntax: > > zpasswd -u=username -p=password -d=domain /path_to_file/access ? > > I don't think it inserts the username for you... > > > -----Original Message----- > > From: Oscar Picasso [SMTP:picasso@videotron.ca] > > Sent: Friday, March 03, 2000 1:20 PM > > To: zope(a)zope.org > > Subject: [Zope] Changing superuser password (Quest) > > > > Hi, > > > > I installed Zope 2.1.4 on my RedHat 6.1. I wanted to change the password > > given > > by the installer. I tried : > > python zpasswd.py -p=mynewpassword access > >

1 0

KM|Net News 1.1
by Kevin Dangoor 03 Mar '00

03 Mar '00

KM|Net News is a Zope through-the-web Product that allows you to post news-style articles on your site. 1.1 is easier to install (because it creates its own Catalog and does not have any external methods) and now incorporates linking to external sites for more weblog-style publishing. (KMNN is still different from Squishdot in that there are no discussions attached to the articles and has different features for placement of the articles within the article listings). You can see KMNN 1.1 in action at http://www.byproducts.com KMNN 1.1 also includes a new "contrib" method for trusted people to contribute articles without review. *** KMNN 1.1 requires PythonMethods. *** You can get KMNN here: http://www.zope.org/Members/tazzzzz/kmnn If you're upgrading from an earlier KMNN, you may want to use the "Restore Defaults" tab to "Rebuild Catalog" and restore "incoming.html". The new incoming.html adds the fields for external articles. This will probably be the last major revision of KMNN before the PTK. Kevin

1 0

RE: [Zope] Trying to do something tricky (for me, that is)
by Andrew Henshaw 03 Mar '00

03 Mar '00

Okay, never mind. I figured it out. I needed to use: expr="REQUEST.has_key('division') to determine if the 'division' has been defined. Also, the passing of multiple variables was obvious - just define a hidden input field. Thanks, anyway. -----Original Message----- From: zope-admin(a)zope.org [mailto:zope-admin@zope.org]On Behalf Of Andrew Henshaw Sent: Friday, March 03, 2000 2:03 PM To: zope(a)zope.org Subject: [Zope] Trying to do something tricky (for me, that is) Okay, I'm new to Zope (3 days), but I was having such success with some simple things that I thought that I could handle something tricky - I've been working at it for a day now. What I would like to do is present two selections (Division and Team) that are populated from an ODBC connection. I can do the population fine, normally; but the trick is that I'd like to have the Team selection dependent upon the Division selection (on the same web page). I realized that I couldn't do this on a simge form (or can I?), so I've assigned the two selections to two forms. I'm putting the two forms on the same page for aesthetic (stubborness?) reasons. Here's the code for the first form: <form action="index_html" method="get"> Division: <select name="division" width=30 value=""> <dtml-in sqlShowDivisions size=50 start=query_start> <option> <dtml-var age_group> </dtml-in> </select> <input type="SUBMIT" value="SUBMIT"> </form> This part works fine. When I submit the form, the same page is regenerated (with the 'division' parameter passed in). One of my many failed attempts with the second form (which is also in 'index_html') is as follows: <form action="TeamSchedule" method="get"> <dtml-var division missing="Undefined"> Team: <select name="team" width=30 value=""> <dtml-in sqlTeamsInDivision size=50 start=query_start> <option><dtml-var name> </dtml-in> </select> <input type="SUBMIT" value="SUBMIT"> </form> my sqlTeamsInDivision has 'division' as its only parameter. When the user first enters the document, he gets an KeyError on 'division'. I understand why this is so (the division parameter doesn't exist yet), but I can't seem to work around it . I tried changing the sql parameter to divisionname and changing the <dtml-in> tag to: <dtml-in expr="sqlTeamsInDivision(divisionname='<dtml-var division missing>')" size=50 start=query_start> and the error goes away, but the returned list is just blanks. How should I be handling this? Also, when this form is submitted, it calls TeamSchedule with the 'team' parameter, but I need to also pass the 'division' parameter. How do I do this? Thanks in advance. -- Andrew M. Henshaw Sr. Research Engineer GTRI Electronics Systems Lab (404) 894-2508 _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Re: [Zope] Worldpilot IMAP Bl00z
by Ryan Hughes 03 Mar '00

03 Mar '00

Hi Tres, Hi Jack, Thanks for the infos/repost. Is there no way to control UW IMAP to look for a specific folder in each user's home dir for the INBOX root? Something like the way http://host/~username/ mapping works in apache? If not, then I'll add this instruction to the upcoming FAQ for worldpilot, since this is the no.1 question up to now. (Jeeze, looks like I'll have to install UW IMAP myself afterall, too.) Cheers, Ryan Tres Seaver wrote: > > Jack Ungerleider wrote: > > > > Hi Tres, > > This was written up last week and after a little digging on egroups (I thought I > > had saved that message) I finally found it. Jo Meder provided the following > > information > > > > <quote> > > Chances are, that the request to "LIST *" in directory "" that > > imaplib issues cause your imapd to begin scanning your whole home > > directory which can be a lot of data, as we all know. > > > > I worked around this problem by creating /etc/c-client.cf with the > > following contents (the first line is required by imapd, otherwise > > the file is not accepted): > > > > --------------------------------------cut here ------------------- > > I accept the risk for IMAP toolkit 4.1. > > set black-box-directory /var/spool/imap_folderlinks/ > > --------------------------------------cut here ------------------- > > > > I then created /var/spool/imap_folderlinks and symlinked the > > directory in which my mailbox folders reside to > > /var/spool/imap_folderlinks/jo > > > > Repeat for all users on the system and set permissions appropriately. > > > > Jo. > > </quote> > > I will be roasted -- I thought I'd followed these directions already, and still > had it hang. When I went back to try again, I discovered that the symlinks were > screwy (how imapd found my home directory at all is a good question). When I > clean them up, it works! > > > Also some information on this can be found in the file imaprc.txt that should > > be in /usr/doc/ or where ever RH dumps it. (I'm running this on SuSE myself.) I > > have tried this fix but I probably will. > > Hmmm, /usr/doc/imap-4.5 has only a README file, which doesn't mention the > /etc/c-client.cfg file at all (it talks about building the package, and setting > up the /etc/services and /etc/inetd.conf files to make IMAP work). Thanks very > much for reposting those directions! > > Tres. > -- > ========================================================= > Tres Seaver tseaver(a)palladion.com 713-523-6582 > Palladion Software http://www.palladion.com -- Ryan Hughes <rh(a)n-h.net> Neuberger & Hughes GmbH http://www.n-h.net ___________________________________________________ WorldPilot Get Synched - http://www.worldpilot.org The Open Source Personal Information Manager Server Powered by Python and Zope - http://www.zope.org

1 0

How to kill that BASE HREF
by Tom Neff 03 Mar '00

03 Mar '00

If you are sure that you can get along without the BASE HREF in a virtually hosted (or other) Zope page, there is a way to fool the ZPublisher so it doesn't include the obnoxious tag. Just put <base dummy=dummy> near the top of your method. This turns out to be enough to fool the fairly droidal scanning code into thinking that no additional BASE tag is needed. Since it's an unknown attribute it should be a total no-op in browsers. Of course they could write a smarter parser in a future release so caveat Zopor, but it works for now. I wish they hadn't relied on that tag to begin with.

1 0

Trying to do something tricky (for me, that is)
by Andrew Henshaw 03 Mar '00

03 Mar '00

Okay, I'm new to Zope (3 days), but I was having such success with some simple things that I thought that I could handle something tricky - I've been working at it for a day now. What I would like to do is present two selections (Division and Team) that are populated from an ODBC connection. I can do the population fine, normally; but the trick is that I'd like to have the Team selection dependent upon the Division selection (on the same web page). I realized that I couldn't do this on a simge form (or can I?), so I've assigned the two selections to two forms. I'm putting the two forms on the same page for aesthetic (stubborness?) reasons. Here's the code for the first form: <form action="index_html" method="get"> Division: <select name="division" width=30 value=""> <dtml-in sqlShowDivisions size=50 start=query_start> <option> <dtml-var age_group> </dtml-in> </select> <input type="SUBMIT" value="SUBMIT"> </form> This part works fine. When I submit the form, the same page is regenerated (with the 'division' parameter passed in). One of my many failed attempts with the second form (which is also in 'index_html') is as follows: <form action="TeamSchedule" method="get"> <dtml-var division missing="Undefined"> Team: <select name="team" width=30 value=""> <dtml-in sqlTeamsInDivision size=50 start=query_start> <option><dtml-var name> </dtml-in> </select> <input type="SUBMIT" value="SUBMIT"> </form> my sqlTeamsInDivision has 'division' as its only parameter. When the user first enters the document, he gets an KeyError on 'division'. I understand why this is so (the division parameter doesn't exist yet), but I can't seem to work around it . I tried changing the sql parameter to divisionname and changing the <dtml-in> tag to: <dtml-in expr="sqlTeamsInDivision(divisionname='<dtml-var division missing>')" size=50 start=query_start> and the error goes away, but the returned list is just blanks. How should I be handling this? Also, when this form is submitted, it calls TeamSchedule with the 'team' parameter, but I need to also pass the 'division' parameter. How do I do this? Thanks in advance. -- Andrew M. Henshaw Sr. Research Engineer GTRI Electronics Systems Lab (404) 894-2508

1 0

error catching
by Oai Luong 03 Mar '00

03 Mar '00

I'm kind novice in zope, but have learn to work around it. My postgres tables are set up with primary keys and unique index. So if there are duplicate entries it returns from postgres, a nasty error in zope if the submission was unsucessfult, that i have no idea what it is talking about ? is there a way that when the user submits data to the database via form on web site, catch the error if the user try to submit a data to the database that already exists, returned by postgres, and out put an english message saying "your data was not submited because it already exists on the database" instead of that ugly error on the zope end ? thanks to anyone if they can help.

1 0

CatalogAware, external method manage_afterAdd
by Tom Deprez 03 Mar '00

03 Mar '00

Hi, I'm once again trying to get further in my test products. * I've created a catalogAware ZClass, called KBItem * KBItem contains an external method with id manage_afterAdd Now, I can add KBItem instances in Zope without problems, BUT! when having a ZCatalog inside a folder with the id Catalog and then try to create a KBItem instance, I get following error (where testje is the id of the KBItem I try to create) : Zope has encountered an error while publishing this resource. Error Type: ValueError Error Value: Uncatalog of absent id 'TEST_Folder/testje' Help! I don't know what I'm doing wrong or what is happening! What does it mean and what can I do? Thanks in advance, Tom.

2 2

Changing superuser password (Quest)
by Oscar Picasso 03 Mar '00

03 Mar '00

Hi, I installed Zope 2.1.4 on my RedHat 6.1. I wanted to change the password given by the installer. I tried : python zpasswd.py -p=mynewpassword access Everything seems ok. I have new file called access which looks like the older one except for the 'password' part. 1 - Do I need to restart zope in order to have the new password be effective. 2 - Even if I restart zope, i cannot use my new password. However if i replace the new file called access by the old one, i can acces to the zope management screen. What have I done wrong?

1 0