- Zope - Zope lists

controlling UDP socket defaulttimeout in External Method
by Bill Seitz 30 Oct '04

30 Oct '04

I am running ZoPe v2.6.2 which uses PyThon v2.1.3. I have some Python code to send data to a business partner over a UDP socket. I'm trying to call that code from an External Method. The socket.setdefaulttimeout() function wasn't defined until Python 2.3. If I want to control the timeout period for this function, how would I do it?

2 5

Zope 2.7.3 Upgrade: How I did it
by hpinson＠indepthl.com 30 Oct '04

30 Oct '04

Just upgraded to Zope 2.7.3 from 2.7.2. Here's what I did: Fedora Core 1 Linux Python 2.2.3 Plone 2.0.4 Existing Zope instance is at /var/zope-instance ./zopectl stop Backed up Data.fs cd /var gunzip Zope-2.7.3-0.gz mv Zope-2.7.3-0 Zope-2.7.3-0.tar tar -xvf Zope-2.7.3-0.tar Zope-2.7.3-0 zope273 cd zope273 ./configure --prefix=/var/zope273 --with-python=/usr/bin/python2.3 make make install Did not run: /var/zope273/bin/mkzopeinstance.py as I have a zope instance already. Then manually edited: /var/zope-instance/bin/runzope /var/zope-instance/bin/runzope.bat /var/zope-instance/bin/zopectl /var/zope-instance/etc/zope.conf to reflect the new /var/zope273 directory Then restarted Zope cd /var/zope-instance/bin ./zopectl start And zope starts and runs. Good luck (hopefully you won't need luck). Harlow Pinson Indepth Learning Email: hpinson(a)indepthl.com Web: http://www.indepthl.com Voice: 505-994-2135 FAX: 208-475-7678

1 0

permissions problem writing file from External Method?
by Bill Seitz 29 Oct '04

29 Oct '04

My Zope v2.6.2 ExternalMethod is giving me an error when I try to open a file for writing. Error: Module /home/zope/Zope/Extensions/notifyAdt.py, line 88, in seqPut IOError: [Errno 13] Permission denied: '/home/lii/logs/notifyAdtSeq.txt' That line of code: sf = open(path+seqFile,'w') (Since this code is also run outside Zope I just use a little file to hold a single value that I want to persist over time - it gets incremented each time.) I think I've made the file as available as possible. -rwxrwxrwx 1 lii lii 1 Oct 27 13:39 notifyAdtSeq.txt Any idea what's going wrong here?

2 4

RPCAuth on debian
by David Cake 29 Oct '04

29 Oct '04

[crossposted from plone list - on reflection, probably more a zope problem that a plone one, and I got no response there anyway. Forgive my newbie confusion - still sorting out what is zope and what is plone] I've installed Zope 2.7 on debian (unstable). My intent was to try Quills, the plone weblog software. But Quills is reporting itself as broken, apparently due to lack of RPCAuth. The immediate problem, however, is RPCAuth. It doesn't appear to be installed, and if I add it as a product to my Zope instance, my Zope instance never accepts connections at all, including management connections. Any suggestions as to what might be going wrong? Or where I might look to find out? Or is RPCAuth more complex to install that just unpacking it in the appropriate directory? Regards David

2 1

RE: [Zope] Apache ProxyPass to Zope
by Tiller, Michael (M.M.) 29 Oct '04

29 Oct '04

Russell, I sympathize. I am in a similar position (corporate intranet uses a proxy that authenticates before proxying). My solution so far has been to use Zope-2.6.2 in PCGI mode. This has left quite a bit to be desired (slow, seem to be some buffering issues that prevent download of large content). I've brought it up on on this list before but everybody says the same thing that they are saying to you, i.e. "that's the wrong way to do it". Unfortunately, for me it is the only way I'm allowed to do it. I was quite optimistic that Plone might catch on here, but I can't even get my site to work 100% so people are quite hesitant to use it. Because I'm using PCGI I'm stuck with Zope-2.6.2 so not only does the site not work 100%, I can't even run new versions of anything. You might look at some of the customizable authentication products. I've looked at some of them and while several claim great flexibility through custom plug-ins, I couldn't really understand how to accomplish what I needed to do. If you find a solution, let me know. -- Mike > -----Original Message----- > From: zope-bounces(a)zope.org [mailto:zope-bounces@zope.org] On Behalf Of > Russell Seymour > Sent: Friday, October 29, 2004 6:17 AM > To: Cliff.Ford(a)ed.ac.uk > Cc: zope(a)zope.org > Subject: Re: [Zope] Apache ProxyPass to Zope > > Thanks for the suggestions Cliff, the thing is that I need Apache to > take care of the authentication. > > This is because I am setting up a Zope application within an existing > Virtual Host which already has the authentication setup on it. This is > done using a Perl script which communicates with a Windows 2003 AD. I > want to keep it this way so that it is easy to understand where the > authntication is taking place and is only in one place. > > Is it not possible to do what I want to do at all? > > Thanks, Russell > > Cliff Ford wrote: > > > I guess I would put it a bit stronger than Tino: don't waste your time > > trying to authenticate with Apache. Just past the request through > > Apache to Zope and do the authentication there. In my site, one of the > > things that Apache does is switch to secure mode (https) for login. It > > is Zope that needs to authenticate by changing its AUTHENTICATED_USER > > from Anonymous to something else. > > > > Cliff > > > > Russell Seymour wrote: > > > >> Good evening list, > >> > >> I have been trying to get the REMOTE_USER variable to be seen by > >> Zope. I have almost got there by using various articles on the > >> Internet, but I need a little bit of help to get the last bit working. > >> > >> I have got Apache performing the authentication and this works well > >> as I get the Zope page when I enter a valid username and password. I > >> have noticed that the Z2 log file for my Zope instances contains the > >> username that I have used to access the site, but I cannot get Zope > >> itself to see the username - this is the most confusing bit for me as > >> it surely means that the username is being passed to Zope. > >> > >> The following is a snippet from my Apache: > >> > >> <Location /zope> > >> AuthName "Zope Access" > >> AuthType Basic > >> > >> <AUTHENTICATION ROUTINES> > >> require valid-user > >> > >> ProxyPass http://x.x.x.x:8080/zope > >> > >> </Location> > >> > >> ProxyPassReverse /zope http://x.x.x.x:8080/zope > >> > >> This all works brilliantly apart from the fact that I cannot get the > >> username in Zope. I need this do I can do some custom authorisation > >> to a database that my Zope application accesses. > >> > >> I have tried many different variations using RewriteRule and trying > >> to set the environment variables but to no avail. > >> > >> Thanks to anyone that can give me some pointers. > >> > >> Russell > >> _______________________________________________ > >> Zope maillist - Zope(a)zope.org > >> http://mail.zope.org/mailman/listinfo/zope > >> ** No cross posts or HTML encoding! ** > >> (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce > >> http://mail.zope.org/mailman/listinfo/zope-dev ) > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://mail.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://mail.zope.org/mailman/listinfo/zope-announce > http://mail.zope.org/mailman/listinfo/zope-dev )

2 2

Re: Thank you!
by Didier.GEORGIEFF 29 Oct '04

29 Oct '04

1 0

Apache ProxyPass to Zope
by Russell Seymour 29 Oct '04

29 Oct '04

Good evening list, I have been trying to get the REMOTE_USER variable to be seen by Zope. I have almost got there by using various articles on the Internet, but I need a little bit of help to get the last bit working. I have got Apache performing the authentication and this works well as I get the Zope page when I enter a valid username and password. I have noticed that the Z2 log file for my Zope instances contains the username that I have used to access the site, but I cannot get Zope itself to see the username - this is the most confusing bit for me as it surely means that the username is being passed to Zope. The following is a snippet from my Apache: <Location /zope> AuthName "Zope Access" AuthType Basic <AUTHENTICATION ROUTINES> require valid-user ProxyPass http://x.x.x.x:8080/zope </Location> ProxyPassReverse /zope http://x.x.x.x:8080/zope This all works brilliantly apart from the fact that I cannot get the username in Zope. I need this do I can do some custom authorisation to a database that my Zope application accesses. I have tried many different variations using RewriteRule and trying to set the environment variables but to no avail. Thanks to anyone that can give me some pointers. Russell

3 3

Newbie question about Zope functions
by Beverly 29 Oct '04

29 Oct '04

We're trying to pick the right open-source platform to build an online community site. Needs are a bulletin board, a blogging capability, and a good permissioning system (users will be members of groups and some pages will be accessible to everyone, but some limited to members of one group or another). Would Zope be a good fit for this? Any examples of Zope sites built with this functionality appreciated. Thanks for any illumination. Beverly (I didn't see a bboard on the zope.org site itself, so maybe Zope's strong points are in content management, rather than these community functions?)

5 5

File uploads: filename with ';'
by Vova 28 Oct '04

28 Oct '04

Hello All! It seems that Zope does not handle names of uploaded files correctly when it include ';'. -- Vladimir

7 17

add folder by ftp/webdav script
by Garito 28 Oct '04

28 Oct '04

Hi! I create a folderish product and I override MKCOL_handler and manage_addFolder to execute a function. This function call a python script and executes it The process work fine (the folder is created) but the FTP client raises an error (but the folder is created correctly!!!!) has anyone any idea about what is happening? Thanks!!!

1 0