May 2004 - Zope - Zope lists

Mail delivery error : Virus found
by postmaster＠situpweb.com 03 May '04

03 May '04

SITUP Web Design Antivirus Scanner Report. ------------------------------------------ A message sent from you was detected to contain a virus. Sender: zope(a)zope.org Recipient: info(a)xlprog.com The Mail has not been delivered. Please check your system and resend the message. If you need help please contact hotline(a)situpweb.com. Thank you. SITUP Web Design http://www.situpweb.com ----- End of Virus Scanner Report ----- /var/MailRoot/spool/0/2/mess/1083616347053.2926919728.webmail.scan/your_picture01.pif Found the W32/Netsky.ab@MM virus !!!

1 0

Re: TextIndexNG
by Nick Gaunt 03 May '04

03 May '04

Hi Floris I have been using TextIndexNG2 under windows with no problem, just copying the product as you describe. The only difference is the compilation of extensions, which I haven't done (used pre-compiled binaries). I tried to install version 2.0.7 under Linux as you describe and find the same problem - the product is apparently installed correctly and is listed in control_panel/products but is not available in the add menu of the ZCatalog index tab. Maybe someone on the Zope list can help? Nick On Monday 03 May 2004 12:37, you wrote: > Hi Mister Gaunt, > > I am a student from Belgium & I am working on Zope/Plone. I have your > email- adress from Gmane. > I am trying to implement TextIndexNG on my Plone2 (Mac OS X), but it > doesn't seem to work... > I saw you are using Zope 2.7.0 & Plone 2 and TextIndexNG1.03... > I am also using Zope 2.7.0 and Plone 2, but I can't install the > TextIndexNG - product. I have tried different versions (2.0, 2.5) > without succes. Your version 1.03 of TextIndexNG seems to work? I can't > find anything about it on the internet? Can you please tell me more > about it? > > I followed the wiki - instructions to install the product: > > * inside lib/python/Products: > > tar xfvz TextIndexNG-X.XX.tar.gz > > * cd to lib/python/Products/TextIndexNG > > * install Python extensions: > > python2.1 setup.py install > > -- in our case: python2.3 setup.py install > > * check the file permissions of the TextIndexNG folder (must be > readable by the user that zope runs with) > * restart Zope > * create a ZCatalog or go to the Indexes tab of the ZCatalogs ZMI > and select "TextIndexNG" from the select box > > -- I can't see the TextIndexNG - in the select box? :-( > > Maybe you can tell me more about it? Or what am I doing wrong? > > Regards, > floris. > > > > Koekoekstraat 65, 1755 Gooik > +32 (0)479 42 08 06 > MSN: floris_doomst(a)hotmail.com * ICQ: 17474400

1 0

Re: [Zope] Module security assertions fail
by Josef Albert Meile 03 May '04

03 May '04

>"ModuleSecurityInfo" is really convoluted and difficult to grasp. > >Try to replace: > > security=ModuleSecurityInfo() > security.declarePublic('checkTranslationService') > >by: > > security=ModuleSecurityInfo('Products.JMUtils.TranslationUtils') > security.declarePublic('checkTranslationService') > >If necessary, also add > > ModuleSecurityInfo('Products').declarePublic('JMUtils') > >ModuleSecurityInfo('Products.JMUtils').declarePublic('TranslationUtils') > > >Ensure that "TranslationUtils" is imported by your "__init__". >Otherwise, security declaration defined inside "TranslationUtils.py" >are not executed and therefore do not take effect. Hi Dieter, Thanks for your reply. Finally I got working. I did everything what you said, but it didn't work either. So, I just replace: <span tal:define="TranslationUtils modules/Products/JMUtils/TranslationUtils;"> Something comes here </span> by its python equivalent: <span tal:define="TranslationUtils python:modules['Products.JMUtils.TranslationUtils'];"> Something comes here </span> and guess what, it worked. I find this behaviour wird because according to the Zope book both statements should do the same. I will try to do a small test file and submit it again here, so, we can see either it's my error or a bug on zope. Regards, Josef _________________________________________________________________ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail

6 6

CMF
by Jesper Olsen 03 May '04

03 May '04

Is the CMF still used in Zope? I have looked briefly at the documentation for CMF and Plone - they appear similar. What is the difference - does it make sense to use CMF for developing new sites? The CMF documentation is referenced on the main zope site http://cmf.zope.org/Members/beehive/ZWACKChap5.html but it seems quite old - last updated in 2001, and some notes about a scheduled move, which apperantly has already taken place... Cheers Jesper

3 2

ExternalEditor: can't get temp_dir to work
by Kent Tenney 03 May '04

03 May '04

Howdy, Win2000 in my ZopeEdit.ini is the following; [general] editor = c:/vim/vim62/gvim.exe temp_dir = c:/temp the 'editor' line works fine, but the dir for local storage is always the default temp dir. I've tried things like temp_dir = c:\temp temp_dir = c:\\temp temp_dir = c:/temp/ What am I doing wrong? Thanks, Kent

2 1

RE: [Zope] remote publishing (l-zope: addressed to exclusive sender for this address) (l-zope: message 5 of 16)
by Dennis P. Wall 03 May '04

03 May '04

Hi Stefan, Curious if you managed to put the script you mention below on your website? Could you, by chance, send along the exact URL? Thanks very much. Sincerely, Dennis -----Original Message----- From: Stefan Bund [mailto:asbund@gmx.de] Sent: Thursday, April 29, 2004 12:42 PM To: Dennis P. Wall Subject: Re: [Zope] remote publishing (l-zope: addressed to exclusive sender for this address) (l-zope: message 5 of 16) "Dennis P. Wall" <dpwall(a)rcn.com> writes: > Stefan, > > That sounds great. I'm only planning on developing a static site. > Where will you upload your script? I will put it on my website at http://www.j32.de. That site is in German. I'll post the exact URL to the list as soon as possible. ... "Dennis P. Wall" <dpwall(a)rcn.com> writes: > I'm a first-timer -- Is it possible to publish a zope website that I > create on my windows box to a remote hosting service? How? If your hosting service does *not* support Zope (as assumed in the other reply), you can still use Zope to author your website. I have written a small python tool to grab a website from my zope-server at home so I can upload it as plain html (the script does support URL's in CSS and JavaScript code and tags ...). This is what I do with my website. Of course, this only works for a static site. I should have uploaded my script for some time now but never got around to do it. But if you need it, I'll upload it. Stefan.

1 0

problem with CMFOPtion CMFextlFile, webdav
by fbarsukow＠fede.generali.fr 03 May '04

03 May '04

Zope : 2.4.4 beta CMFoption : 1.1 hi, i create some CMFextFile ( id= test.doc , title = test.doc , content = winword document) from CMFOptions product, but when i want to edit it by webdav protocol, my file is in read only. I tried some solution given on the web but with no success. I notice that in the webdav management console, my object doesn't appear as locked whereas a file object open by webdav protocol appears as locked. Other thing , in my zope log : For a CMFExtfile , LOCK header is present but...... For a File LOCK header is present and it's good. Somebody can give me a solution. thanks a lot. fabien

1 0

Symantec AntiVirus/Filtering detected a violation/virus in a document you authored.
by BWD11.Blueteam.ch/BlueTeam/CH＠blueteam.ch 03 May '04

03 May '04

Please contact your system administrator. The infected component in the scanned document was deleted. Violation Information: The attachment message.scr contained the virus W32.Netsky.P@mm and was deleted.

1 0

How To run current Zope 2 & 3 from CVS on Windows
by Max M 03 May '04

03 May '04

If any of you Windows developers are interrested in trying out Zope 3 from the CVS, this might make it easier. How To run current Zope 2 & 3 from CVS on Windows http://www.mxm.dk/papers/run-z3-cvs-wthout-compiler/ This how-to tells how to run Zope 2 (Z2) and Zope 3 (Z3) from CVS on Windows, without access to a compiler. This probably most relevant for Windows developers that wants to stay current with Z3. Though releases are made once in a while for Z3, they are quickly outdated. So if you want to develop on it, or just try it out, you need to download it from CVS. This can be a problem for Windows developers that do not have Microsofts Visual Studio installed. The reason is that Z3 must be compiled with the same compiler as the Python install. The ususal Python Windows distribution is compiled with VS 6.0, so if you want to run Z3 with your normal installer, it must be compiled with that. Without VS 6.0 installed, that is a bit of a jam for us lowly Windows developers. There are a few ways to get around it though, even without a compiler ... regards Max M

1 0

binding to 'context' from a Python product
by Jim Anderson 03 May '04

03 May '04

I've reading Zope documentation and python/lib modules and have not found a way to bind to the current folder context when I run my python product in Zope 2.7. I'm creating the product with a member function, ex(). So for example, if my product is 'sample' and the member function is 'ex', I try executing 'sample.ex()'. Inside ex(), I have the following code: def ex(self): request = context.REQUEST The product loads ok, but when ex() is called, I get an error message: Error Type: NameError Error Value: global name 'context' is not defined Thanks in advance for any tips.

2 1