- Zope - Zope lists

RE: [Zope] Performance requirements and ZEO
by BZ 31 Jul '03

31 Jul '03

Bart, The machine you have listed below would EASILY handle 1,000,000 hits a day. If you are worried about it, try some benchmarks using Apache Bench (ab). Here are some VERY old ones I did.. http://www.zope.org/Members/BwanaZulia/benchmarks.html Basically, your machine should easily be able to handle 50-100 requests per second and there are a ton of things you can do to offload the work from Zope if you are looking for raw speed... - Have images/files served up by Apache (lets Zope do what it does best) - Use Zope internal RAM Cache on things that are highly dynamic - Use a proxy server (like Squid) for offsite caching Good luck. Cheers, Jake > BZ, > > Thanks a bunch for the speedy reply. The machine I was looking at has a > RAID5 controller with 3 Ultra320 SCSI 10,000 RPM 36GB drives, 2 GB RAM, > and > 2 processors. From what I've read, I'm starting to think maybe I should > be > getting a fast single-processor machine with more memory, instead of > spending that money on two or three machines. > > Thank you for your help. > > -bart > >> -----Original Message----- >> From: BZ [mailto:bz@bwanazulia.com] >> Sent: Thursday, July 31, 2003 5:24 PM >> To: bart hubbard >> Cc: zope(a)zope.org >> Subject: Re: [Zope] Performance requirements and ZEO >> >> >> Bart.... >> >> I run 2/3 major sites that brings my zope up to about 100,000 >> hits a day and I can tell you you are going to have a lot of capacity. >> >> My set up: >> - 1.67 AMD >> - 1.5 GB DDR Ram >> - 2 x 36 GB SCSI in Raid >> - Tape backup, etc... >> >> I store everything in the ZODB (images, js, css) which totals >> 59,702 objects. The zope process is fine, it peaks up and >> down but there are also other sites (minor) running on Apache >> and mail server running on the machine (also logs, tools, etc >> etc..). I would say the machine runs at about 3-4% of >> capacity. I could easily bring this box up to 1,000,000 hits >> a day without worrying about expanding. >> >> Here is some suggestions: >> - Get lots of RAM. Zope (python) loves RAM (and RAM cache helps) >> - Up your zope threads (I run at 10) and cache size (10,000) >> - Get SCSI & RAID (7,200 - 10,000 RPM). Since Zope reads its >> ZODB from the drive you want this to be fast and reliable. >> >> I think you could easily start with one box and migrate up. >> If you are planning on a dual, look into Python and SMP. I >> remember reading it was not great, so what you could do is >> run two instances (your ZEOs) one on each processor. >> >> Cheers, >> BZ >> >> >> >> >> >> >> > I'm working on a project to build a public website using >> Zope, and am >> > in a position where I need to spec and order the hardware before >> > beginning the work on the site. We're going to plan for 500,000 >> > hits/day as a benchmark. I'm leaning towards a ZEO >> configuration, with >> > a dedicated ZEO Storage Server >> > and 2 ZEO Client machines, with a load-balancer up front. >> This way, the >> > worst case is the performance isn't up to par, and I can >> just toss another >> > machine at it as a ZEO Client. >> > >> > Here's the question: is there any benefit to having dual-processor >> > machines on any of these? I think we can afford 3 of them, if >> > necessary, but is it even needed? I was planning on going with >> > Dual-Xeon 2.8 GHz boxes running Linux. I'd rather not run >> more than >> > one instance of Zope on the clients, btw. >> > >> > Also, I'm having trouble finding info on getting SSL >> working in a ZEO >> > setup. Are there any docs out there I should read? >> > >> > much thanks, >> > bart >> > >> > >> > _______________________________________________ >> > Zope maillist - Zope(a)zope.org >> > http://mail.zope.org/mailman/listinfo/zope >> > ** No cross posts or HTML encoding! ** >> > (Related lists - >> http://mail.zope.org/mailman/listinfo/zope-> announce >> > >> http://mail.zope.org/mailman/listinfo/zope-dev ) >> > >> >> > > >

1 0

editing docs via ftp (emacs)
by Rob Nikander 31 Jul '03

31 Jul '03

Hi all, I am new to Zope and would like to edit my DTML and Python using emacs. I have figured out how to FTP the document to the Zope server (this is documented in several places: you visit file /user@host#port/...), but what I can't figure out is how to create different "types" of files and objects. For example, if I create a "page template" or "dtml method" in the Zope web interface, and then edit and save the file in emacs (through FTP) it changes the file to a DTML Document. Basically everything I touch with Emacs/FTP becomes a DTML document. The "Zope Book" online talks about FTPing to the url of your template + "/source.html", but that has not worked -- I get FTP errors that the template file is not a directory. Any pointers? Thanks, Rob

2 1

Re: [Zope] button instead of textlink and checking selection
by Michael Bleijerveld 31 Jul '03

31 Jul '03

Hi Chris, In future I will post in text-format. Sorry for the inconvience. Thanks for the answers. My problems are solved. Cheerio, Michael ----- Original Message ----- From: "Chris Withers" <chrisw(a)nipltd.com> To: "Michael Bleijerveld" <michael(a)bleijerveld.nl> Cc: <zope(a)zope.org> Sent: Thursday, July 31, 2003 5:34 PM Subject: Re: [Zope] button instead of textlink and checking selection > Hi Michael, > > Please don't post in HTML, it's quite hard to read ;-) > > Michael Bleijerveld wrote: > > 1) Instead of using the textlink Next I want to use a button (form) ? > > How can I establish this ? > > <dtml-if next-sequence> > > <a href="<dtml-var URL><dtml-var > > sequence-query>query_start=<dtml-var next-sequence-start-number>"><br>Next<dtml-var > > next-sequence-size></a> > > </dtml-if next-sequence> > > <dtml-if next-sequence> > <form action="<dtml-var URL"> > <input type="submit" value="Next <dtml-var next-sequence-size>"> > <input type="hidden" name="query_start" value="<dtml-var > next-sequence-start-number>"> > </form> > </dtml-if> > > > 2) How can I check if REQUEST[''ids] is not empty when using <dtml-call > > "manage_delObjects(REQUEST['ids'])"> ? > > REQUEST.get('ids',[]) > > cheers, > > Chris > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://mail.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://mail.zope.org/mailman/listinfo/zope-announce > http://mail.zope.org/mailman/listinfo/zope-dev ) > >

2 1

strange unicode behaviour
by Giuseppe Bonelli 31 Jul '03

31 Jul '03

I have spent the last 30 minutes going crazy with this: in dtml: <html> <head> <meta http-equiv="content-type" content="text/html;charset=utf-8"> </head> <dtml-call "getText()")> </html> in python: def getText(): s=u'a string with some accented chars' s=s.encode('utf-8') return s the above works fine, but return s.lower() does not !!! (the accented chars are badly rendered in the browser). Can someone, please, explain this to me?? I am on zope 2.6.1 (installed from binaries under win), >From the python console everithing is OK, so there should be something with Zope. I have utf-8 as sys.defaultencoding and I do not load any locale when starting Zope. Thanks for any help, --peppo

8 12

Configuration of Apache and PCGI
by karthikeyan kk 31 Jul '03

31 Jul '03

Will someone help me to rectify the problem i) I had Zope.pcgi directed to cgi-bin/ ii) In Vhosts.conf, I made the following changes <VirtualHost 127.0.0.1> //I thought the localhost is ok ScriptAlias /cgi-bin/ /home/guest/kkeyan/Webguard/cgi-bin/ <Directory "/home/guest/kkeyan/Webguard/cgi-bin"> AllowOverride None Options ExecCGI Order deny,allow Allow from 127.0.0.1 </Directory> RewriteEngine on RewriteCond %{HTTP:Authorization} ^(.*) RewriteRule ^/(.*)/home/guest/kkeyan/Webguard/Zope/Zope.pcgi/$1 \ [e=HTTP_CGI_AUTHORIZATION:%1, t=application/x-httpd-cgi,l] //Assume the abv 2 in 1 <Location> SetHandler cgi-script </Location> </VirtualHost> iii) In the Zope.pcgi,I made the changes as mentioned in :http://zdp.zope.org/projects/zbook/book/VII/IntegraWebServers/IntegraUnix/IntegraApacheDrafts/953556353 iv) When I wrote the changes in Vhosts.conf it says RewriteRule: bad flag delimiters v) Apache version is 1.3.23Apache-AdvancedExtranetServer in Mandrake8.2 I may have explained the problem bit too long, but I cant help We are keen to use Zope for our product. Could I have the help pls Thanks in advance Karthikeyan ________________________________________________________________________ Want to chat instantly with your online friends? Get the FREE Yahoo! Messenger http://uk.messenger.yahoo.com/

2 1

Raw request
by Armando Licurgo 91566573 31 Jul '03

31 Jul '03

How can i get the raw request launched by the browser (with the browser signature) in Zope ? ===== Armando Licurgo Licurgo & Ponce Consultoria f.: 0xx19 3231-6313 cel.: 91566573 __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com

2 1

How To Remove Members Folder In Plone - I/O Error
by Pavlica, Nick 31 Jul '03

31 Jul '03

All, I'm trying to remove the .personal / members folder from some of the users that were added to the site before the do not create home folder was enabled. When I try to do this from the ZMI I get the following error. How can I remove these folders without destroying the users and re-creating them ? ex) Error Type IOError Error Value [Errno 5] Input/output error Thanks for your help!!! -- Nick Pavlica EchoStar Communications CAS-Engineering (307)633-5237

2 1

modifying dtml-tree
by Paul Williams 31 Jul '03

31 Jul '03

Hi all, I am currently building an application for managing and tracking assets. As part of this I am using a dtml-tree based menu system. All of the functionality is within subfolders, ordered by area of activity. Eg: app / search / by dept by asset type by location modify / add asset add type ... All of the above listed are folders. when I use a dtml-tree, the expand + icons allow one to expand the menu, but clicking on the folder associated (ie search) takes you to the search folder. Since this contains nothing but folders I want it to behave like the + or - icons. I seem to remember reading somewhere that someone had done this, but a reacent search via google, the zope site, etc has turned up a blank. I found the original link by accident and I have forgotten what I was looking for at the time so I cannot replicate this search. Has anyone seen something similar, or would anyone have any pointers if I need to modify the TreeTag.py source file. I would quite like to do the latter, but it is rather daunting for a first hack :-) Any help or pointers appreciated Paul

2 1

ZCatalog for Zope 2.6.1
by Tom P. Allred 31 Jul '03

31 Jul '03

Hi, I've just started playing with ZCatalog in Zope 2.6.1 and have followed the tutorial in the online 2.6 edition of The Book successfully to the point of creating a keyword index that returns the correct number of data_record_id_s for my query keywords for various indexes on File objects I'm storing data in as Properties. I've also read a couple of online ZCatalog tutorials, most of which were based on DTML and earlier versions. It looks like ZCatalog will work fine for my small data requirements but I need to register in the catalog my (data) File objects when I create them and when their Properties are changed. I understand I can use ZClasses to create data objects that are CatalogAware and that Products can also be created with that attribute and then I could create my data objects from those. I'll look into those ideas (and suggested Products like Abracadabra, Archetypes and mxm Easy Product) but for now I'd settle for a way to invoke a ZCatalog Find/ReIndex programmatically via python in my user add and update programs. That way I could at least finish my prototyping without getting into the things mentioned above. Unfortunately I haven't found an example of how to do what I'd like. Can someone please provide one? Thanks, Tom P. Allred, MCSE, RHCE, CCNA Allred Data Consulting, Inc. 888-381-0611 www.AllredData.com Tom(a)AllredData.com

2 1

Re: [Zope] help with the fle3 install
by Chris Withers 31 Jul '03

31 Jul '03

Sansón wrote: > hello > someone know how i can installed fle3 with zope? What is fle3? Stop posting in HTML, sort your 'From:' header out, and post more detail in your messages... Chris

2 1