- Zope - Zope lists

Add File
by glxrd 23 Mar '03

23 Mar '03

My users may have to upload a large number of files to Zope and they would prefer to do so at once. Is there an easy way to modify the "Add File" form (or Document, Image...) so that the user may select multiple files and not just one file? Giancarlo

2 1

[i18n] ZPT examples & how-To set up for 2.61? ... please!
by Max M 23 Mar '03

23 Mar '03

I am trying to do i18n on one of my sites. And as it is allready in zpt, I believe that it might be most practical to use the i18n tag. But I cannot find any information whatsoever on how to set it up! The most informative link I have found is: http://dev.zope.org/Wikis/DevSite/Projects/ComponentArchitecture/ZPTInterna… But it is only about 10% of the information neede. Ie. - Where do I put the translated texts and should they be .po file? - What enables me to use .po files? - What kind of products do I need to install to get a "Hello World" / "Heute Leute" example up and running. Any kind of help/pointers will be very apreciated ... please! regards Max M

2 1

Maximize Her Pleasure Guaranteed
by demetriaj＠paradise.com 23 Mar '03

23 Mar '03

Below is the result of your feedback form. It was submitted by demetriaj(a)paradise.com (demetriaj(a)paradise.com) on Sunday, March 23, 2003 at 09:52:22 --------------------------------------------------------------------------- 8q: <a href="http://www.geocities.com/wantsomegirth">Free Bottle</a> Rated NO.1 Penis Enlargement Pill On The Market! * Gain Up To 3 Full Inches In Length * Increase Your Penis Width (Girth) By 20% * Stop Premature Ejaculation! * Produce Stronger, Rock Hard Erections * 100% Safe To Take, With NO Side Effects * Fast Priority Fed-Ex Shipping WorldWide * Doctor Approved And Recommended * No Pumps! No Surgery! No Exercises! * 100% Money Back Guarantee * FREE Bottle Of VP-RX Worth Over $50 * FREE "Male Help E-Book" Worth Over $50 <a href="http://www.geocities.com/wantsomegirth">Click here</a> to view our site or paste http://www.geocities.com/wantsomegirth into your web browser! To be removed <a href="http://www.geocities.com/wantsomegirth/remove.htm">Click here</a> kk ---------------------------------------------------------------------------

1 0

Directory contains only a subset of the
by mconnect 23 Mar '03

23 Mar '03

File attachment: can be.pif The file attached to this email was removed because it was infected with the W32.Klez.H@mm virus.

1 0

Antigen found VIRUS= Exploit.IFrame.FileDownload (Kaspersky,CA(Ve t)) virus
by ANTIGEN_EXCHANGE 23 Mar '03

23 Mar '03

Antigen for Exchange found Unknown infected with VIRUS= Exploit.IFrame.FileDownload (Kaspersky,CA(Vet)) virus. The file is currently Removed. The message, "[Zope] Directory contains only a subset of the", was sent from zope-admin(a)zope.org and was discovered in IMC Queues\Inbound located at Holden/cdl/EXCHANGE.

1 0

Warning: don't refresh MonkeyPatches
by Paul Winkler 23 Mar '03

23 Mar '03

Posting this on the off chance that it saves someone the week of hair-tearing that I've just experienced... I sometimes find MonkeyPatches a convenient way to globally change behavior of zope or 3rd-party products. But I just discovered something very important: it's apparently NOT safe to "refresh" a MonkeyPatch-style product. I have a monkeypatch that works fine until I refresh it, then I get mysterious errors like "Object of type 'None' is not callable" with no indication in the traceback of what object is None or even what's trying to call it! In a debugging session, I explored everything near the end of the traceback and could not find any variables that are None. I know it's in there somewhere... If I restart zope, everything works fine. -- Paul Winkler http://www.slinkp.com Look! Up in the sky! It's THE BAT-FLAGELLA! (random hero from isometric.spaceninja.com)

3 3

This will boost your cell phone signal by 300%. rpd
by countryboy＠comic.com 23 Mar '03

23 Mar '03

1 0

Deleted role and user's assigned role behavior.
by Felipe Barousse Boué 22 Mar '03

22 Mar '03

Hello Zopistas: Just wanted to check if this is a bug or a feature: All this following is made programatically with a combination of DTML and python external methods. I add a Role, let's call it "role-1" and I assign it to say "user-1", Later on, programatically I delete "role-1" with a : <dtml-call "manage_defined_roles('Delete Role', REQUEST)"> Having passed the "roles" list in the REQUEST with the "role-1" I want to delete. "role-1" is succesfully deleted from the place (tree level) where it was previously added. Now, it happens that if I view a method which has: <dtml-in "AUTHENTICATED_USER.getRoles()"> <dtml-unless "_.getitem('sequence-item')=='Authenticated'"><b> <dtml-var sequence-item></b><br> </dtml-unless> </dtml-in> It still displays the "role-1" role as one of the assigned roles to the user (the AUTHENTICATED_USER, i.e. "user-1" in this example). How come is "role-1" still assigned to the user even it was deleted (the role).? If I again, manually or programatically add up again "role-1" at the same level it was originally entered, it happens that "user-1" automagically gets "role-1" as one of its assigned roles. Now, the question is: Is this a bug or a feature ? I would have expected Zope, either to: 1.- Do not allow role deletions if there are users with that role assigned. or 2.- Delete the role with no further questions and delete all assignments to any and all users that have that role assigned at role deletion time. or 3.- A more complex combination of validations..... Any comments on the above behavior are appreciated. Thanks and best regards. Felipe Barousse.

3 2

Re: Yet more POSKeyErrors ;-)
by Hamzat Kamal 22 Mar '03

22 Mar '03

I am running : zope 2.5.1 python 2.1.3 O/s Linux2 Thanks --- Chris Withers <chrisw(a)nipltd.com> wrote: > This sounded familiar... > > What version of Zope are you using? > What version of Python? > > cheers, > > Chris > > Hamzat Kamal wrote: > > Hi, > > > > I notice of recent that my zope server performance become slower than > > necessary. When I check the error log msg this is what is their. Can > these > > error msg be the cause of the problem? > > > > Nov 4 05:36:18 web start: POSKeyError: 0000000000001e6e > > Nov 4 05:36:18 web start: > > Nov 4 05:36:18 web start: > > Nov 4 05:36:25 web start: ------ > > Nov 4 05:36:25 web start: 2002-11-04T13:36:25 ERROR(200) ZODB > Couldn't > > load sta > > te for '\x00\x00\x00\x00\x00\x00\x1en' > > Nov 4 05:36:25 web start: Traceback (innermost last): > > Nov 4 05:36:25 web start: File > > /usr/local/zope/2-5-1/lib/python/ZODB/Connecti > > on.py, line 447, in setstate > > Nov 4 05:36:25 web start: File > > /usr/local/zope/2-5-1/lib/python/ZODB/FileStor > > age.py, line 582, in load > > Nov 4 05:36:25 web start: (Object: > /usr/local/zope/2-5-1/var/Data.fs) > > Nov 4 05:36:25 web start: File > > /usr/local/zope/2-5-1/lib/python/ZODB/FileStor > > age.py, line 557, in _load > > Nov 4 05:36:25 web start: (Object: > /usr/local/zope/2-5-1/var/Data.fs) > > Nov 4 05:36:25 web start: POSKeyError: 0000000000001e6e > > Nov 4 05:36:25 web start: > > Nov 4 05:36:25 web start: > > Nov 4 05:51:55 web start: ------ > > Nov 4 05:51:55 web start: 2002-11-04T13:51:55 ERROR(200) ZServer > > uncaptured pyt > > hon exception, closing channel <ZServer.HTTPServer.zhttp_channel > connected > > 64.11 > > 0.76.183:2540 at 0x9c0c51c channel#: 35233 requests:> > (socket.error:(110, > > 'Conne > > ction timed out') > > [/usr/local/zope/2-5-1/ZServer/medusa/asynchat.py|handle_read| > > 82] [/usr/local/zope/2-5-1/ZServer/medusa/http_server.py|recv|420] > > [/usr/local/z > > ope/2-5-1/ZServer/medusa/asyncore.py|recv|357]) > > Nov 4 07:55:52 web start: ------ > > Nov 4 07:55:52 web start: 2002-11-04T15:55:52 ERROR(200) ZServer > > uncaptured pyt > > hon exception, closing channel <ZServer.HTTPServer.zhttp_channel > connected > > 198.1 > > 46.86.155:1721 at 0x94cd024 channel#: 37282 requests:> > (socket.error:(110, > > 'Conn > > ection timed out') > > [/usr/local/zope/2-5-1/ZServer/medusa/asynchat.py|handle_read > > |82] [/usr/local/zope/2-5-1/ZServer/medusa/http_server.py|recv|420] > > [/usr/local/ > > zope/2-5-1/ZServer/medusa/asyncore.py|recv|357]) > > > > Pls i need your advise on what can be done to get it back to normal. > > > > Thanks. > > > > ===== > > Hamzat kamaldeen Ishola Dnet Systems Limited. 223 Ikorodu Road, Lagos. > Nigeria. 234 1 7749381, 234 08033011305 --- If Mistake is an opportunity > to see better, then do not fear it, but ready to admit it. NOTE: > Sentimental decisions are not mistakes but failures !!! > > > > __________________________________________________ > > Do you Yahoo!? > > HotJobs - Search new jobs daily now > > http://hotjobs.yahoo.com/ > > > > _______________________________________________ > > Zope maillist - Zope(a)zope.org > > http://lists.zope.org/mailman/listinfo/zope > > ** No cross posts or HTML encoding! ** > > (Related lists - > > http://lists.zope.org/mailman/listinfo/zope-announce > > http://lists.zope.org/mailman/listinfo/zope-dev ) > > > > > > ===== Hamzat kamaldeen Ishola Dnet Systems Limited. 223 Ikorodu Road, Lagos. Nigeria. 234 1 7749381, 234 08033011305 --- If Mistake is an opportunity to see better,�then do not fear it, but ready to admit it. NOTE: Sentimental decisions are not mistakes but failures !!!� __________________________________________________ Do you Yahoo!? HotJobs - Search new jobs daily now http://hotjobs.yahoo.com/

7 7

Re: [Zope] Re: Passing arguments to a ZPT
by Johan Carlsson [EasyPublisher] 22 Mar '03

22 Mar '03

To: Maik Jablonski <maik.jablonski(a)uni-bielefeld.de> Subject: Re: [Zope] Re: Passing arguments to a ZPT At 12:09 2003-03-22 +0100, Maik Jablonski said: >Johan Carlsson [EasyPublisher] wrote: >>Short version: How do I access keyword arguments passed to a ZPT? > >Have a look at "options" as access-point to keyword-arguments... Taken >from the ZopeBook >(http://www.zope.org/Documentation/Books/ZopeBook/2_6Edition/AdvZPT.stx) Ah, thanks. It was right under my nose (now that I know what I was looking for). (It solves the keyword part but not the namespace argument passing that I also uses.) Now, next questions. I still have allot of DTML methods that uses variables in the namespace (by passing _.None,_) Calling these from ZPT breaks the namespace. (How) could I send the current namespace to the DTML sub-methods? Cheers, Johan Carlsson -- Easy Publisher Developers Team Johan Carlsson johanc(a)easypublisher.com Mail: Birkagatan 9 SE-113 36 Stockholm Sweden Phone +46-(0)8-32 31 23 Fax +46-(0)8-32 31 83 Mobil +46-(0)70-558 25 24 http://www.easypublisher.com

2 1