- Zope - Zope lists

RE: [Zope] Content Management
by Don Brooksby 12 Feb '03

12 Feb '03

Thank you all for the help and info. I now have the errors coming up properly, thanks Paul. So now I can see what is going on. I was able to trace the root of the problem and it came up to where I was referencing a value that was not passing right. I have changed the reference and BAM! it works. Dario, I am taking your suggestion on Python - I'm hitting the books and info available to trap errors etc through Python. Much thanks, all mighty Zope Mentors. --Don Brooksby -----Original Message----- From: Dario Lopez-Kästen ----- Original Message ----- From: "Paul Winkler" > On Wed, Feb 12, 2003 at 01:14:53PM -0700, Don Brooksby wrote: > > Because in my reading of other emails that are posting to Zope, as > > much info as possible is what is requested, so here are 2 dtml > > methods where I am seeing the failures - no error pages are > > displayed, it just tells me it was not successful writing. > > That's because you caught the errors in > <dtml-try>...<dtml-except>...</dtml-try>. > > Test it again with ONLY the <dtml-call> that > actually updates the table; in particular get > rid of the tags I mentioned. > > That way you'll get a traceback with more information. > Come back and post the traceback and maybe somebody > can help you. Also, Don, you really don't want to use DTML for that kind of stuff. Better to direct the posting of the form to a pythons script ("Script (Python)" as they are called in the ZMI) and then generate error messages form there and then either redirecting to or calling a DTML-method to report errors/success. Doing all that in DTML is way to hard to be worth the effort - been there, done that - and you'll be able to write code that traps errors in a much nicer way than you can do in DTML - and as a bonus you will find that yopur code will easier to write and debug. My 2 <insert lowly currency here> worth. /dario - -------------------------------------------------------------------- Dario Lopez-Kästen, IT Systems & Services Chalmers University of Tech. _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )

1 0

mailhost localzone error
by AM 12 Feb '03

12 Feb '03

When I try to use the following: <dtml-sendmail mailhost="mail_host"> To: list_subscriber(a)neurobs.com From: list_subscriber(a)neurobs.com Subject: test Dear test, You order number dadada is ready. Please pick it up at your soonest convenience. </dtml-sendmail> for my MailHost object mail_host I get the following: Traceback (innermost last): * Module ZPublisher.Publish, line 98, in publish * Module ZPublisher.mapply, line 88, in mapply * Module ZPublisher.Publish, line 39, in call_object * Module OFS.DTMLMethod, line 126, in __call__ * Module DocumentTemplate.DT_String, line 474, in __call__ * Module Products.MailHost.SendMailTag, line 115, in render * Module Products.MailHost.MailHost, line 123, in send * Module Products.MailHost.MailHost, line 208, in _mungeHeaders * Module DateTime.DateTime, line 1441, in rfc822 NameError: global name 'localzone' is not defined Any ideas as what has gone wrong with my mailhost. TIA AM -- ================================================================== Aseem Mohanty Neurobehavioral Systems Inc, 828 San Pablo Ave, Albany, CA 94706 (R) 510 7696011 (M) 510 3014871 (O) 510 5279231 ================================================================== "I saw `cout' being shifted "Hello world" times to the left and stopped right there!!" -- Steve Gonedes ==================================================================

3 5

Writing a product
by Stavros Tsolakos 12 Feb '03

12 Feb '03

Hi list. I want to find some step by step reference about how to write a new product. I have found some how-tos, but I still feel completely lost. Everywhere I look, I see Zope specific function calls. Does any document exist containing product-API specific stuff that could aid a Zope little-above-newbie level developer? Thanks for your time and I apologize about my newbieness Regards Stavros.

7 6

RE: [Zope] (no subject)
by sean.upton＠uniontrib.com 12 Feb '03

12 Feb '03

I assume that this should be in the services control panel, but this is just a wild guess. If this is the case, just right-click and select stop, like any other NT service. Sean -----Original Message----- From: Santoshi Reddy [mailto:sreddy@cise.ufl.edu] Sent: Wednesday, February 12, 2003 1:39 PM To: Michael Lewis Cc: zope(a)zope.org; rima(a)ufl.edu Subject: Re: [Zope] (no subject) on windows i meant if its installed as a service. S. On 12 Feb 2003, Michael Lewis wrote: > On Wed, 2003-02-12 at 12:41, Santoshi Reddy wrote: > > How do u shut down the Zope server. > > > > S. > ./stop > _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )

1 0

newbie q: how to block IP
by Sungmook Kim 12 Feb '03

12 Feb '03

hi! i have this guestbook similar to what is shown in the zope book. i'd like to know if there are possibilities to write a script or a code which blocks unwanted ip addresses. thanks __________________________________________________________________ Gesendet von Yahoo! Mail - http://mail.yahoo.de Bis zu 100 MB Speicher bei http://premiummail.yahoo.de

6 7

Z2.log and authenticated users
by Josef Meile 12 Feb '03

12 Feb '03

Hi, is it possible to force zope to write the authenticated users in the Z2.log? The only two users that I see in this file are "Anonymous" and "admin". The later only appears if it logs through the manage interface. The reason of doing this is that I would like to process my log file with a log analyzer like webalizer in order to see which user has more accesses. Thanks in advanced, Josef.

3 2

CMFBackTalk
by Asad Quraishi 12 Feb '03

12 Feb '03

In the Plone documentation it is stated that the CMFBackTalk product is used to build the documentation. I would like to use this product in my Plone site to enable the creation of on-line manuals. Does anyone know where I can get this product from? From the Plone docs under Appendix D: "The Plone book uses CMFBackTalk, based on Backtalk, orignally developed by Chris McDonough. CMFBackTalk is developed by Kapil Thangavelu with some minor hinderances from Andy McKay." Thanks in advance.

1 0

Content Management
by Don Brooksby 12 Feb '03

12 Feb '03

Greetings Zope Mentors... I am of a grave realization that perhaps I am once again banging my head on a brick wall. I am the one, some may remember, that is using PostgreSQL for data collection and writing dtml forms for administration of articles that can be pulled from one data source for multiple locations in my website. My last problem was in reference of pulling a checkbox value into a dtml page. Now, with all of that working, my problem is writing back to the table with the updated information on an article. Below is my list of trial and errors: * I have verified that up to the dtml method of collecting the proper information. * I have tried, in my dtml method of posting to the database, all different ways of collecting the data to be written. (this is where my data fails to post to the tables) Because in my reading of other emails that are posting to Zope, as much info as possible is what is requested, so here are 2 dtml methods where I am seeing the failures - no error pages are displayed, it just tells me it was not successful writing. 1st method, where all changed information to the article is gathered. Data checks are preformed before the following code - seeing if the checkbox is set to 1 or 0... <<DTML Method -updateArticle_html>>  <dtml-try> <dtml-call "article1_updateRecord( a1_Title=_['newtitle'], a1_Author=_['newauthor'], a1_Body=_['newbody'], a1_Pix1=_['newpix1'], a1_Pix2=_['newpix2'], a1_Date=_['newdate'], ai1=_['newmain'], ai2=_['newstate'], ai3=_['newmesc'], ai4=_['newcorp'], ai5=_['newgsa'], ai6=_['newreseller'], ai8=_['newnetapp'], ai9=_['newmobile'], ai10=_['neweducation'], a1_Publish=_['newpublish'], a1_IDNum=_['newarticle'])"> <dtml-call "REQUEST.set('status', 'ok')"> <dtml-except> <dtml-call "REQUEST.set('status', 'failed')"> </dtml-try> <dtml-if "_['status']=='ok'"> <h1>Record was sucessfully Updated.</h1> <form action="index_html"> <input type="submit" value="OK"> </form> <dtml-else> <h1>Updating the new record failed.<br>No record was changed.</h1> <table> <tr> <td> <form action="update_article_html"> <input type="submit" value="Try Again"> </form> </td> <td> <form action="index_html"> <input type="submit" value="OK"> </form> </td> </tr> </table> </dtml-if> -------------------------- The *dtml-call "article1_updateRecord* calls the following ZSql method: <<Arguments:>> A1_Title A1_Author A1_Body A1_Pix1 A1_Pix2 A1_Date Ai1 Ai2 Ai3 Ai4 Ai5 Ai6 Ai8 Ai9 Ai10 A1_Publish A1_IDNum <<SQL statement:>> UPDATE A1 SET A1_Title=<dtml-sqlvar a1_Title type="string">, A1_Author=<dtml-sqlvar a1_Author type="string">, A1_Body=<dtml-sqlvar a1_Body type="string">, A1_Pix1=<dtml-sqlvar a1_Pix1 type="string">, A1_Pix2=<dtml-sqlvar a1_Pix2 type="string">, A1_Date=<dtml-sqlvar a1_Date type="string">, Ai1=<dtml-sqlvar ai1 type="string">, Ai2=<dtml-sqlvar ai2 type="string">, Ai3=<dtml-sqlvar ai3 type="string">, Ai4=<dtml-sqlvar ai4 type="string">, Ai5=<dtml-sqlvar ai5 type="string">, Ai6=<dtml-sqlvar ai6 type="string">, Ai8=<dtml-sqlvar ai8 type="string">, Ai9=<dtml-sqlvar ai9 type="string">, Ai10=<dtml-sqlvar ai10 type="string">, A1_Publish=<dtml-sqlvar a1_Publish type="string"> WHERE A1_IDNum=<dtml-sqlvar a1_IDNum type="string"> ------------------------- ** all items in the table are set to "string" - so I am writing Strings to the db. I have tested this method with '<dtml...>' and all other ways that are suggested by all the different documentation I have read about zope. This is the only way I have been able to write data to the db table when adding, so slight modification for Updates seem rational. *sigh* where am I getting this wrong? Does anyone have ideas? Don Brooksby

4 3

RE: [Zope] dtml-sendmail integer required?
by Jean-Francois.Doyon＠CCRS.NRCan.gc.ca 12 Feb '03

12 Feb '03

Known bug in 2.6.0, which is fixed in 2.6.1 ... Sorry don't have the tracker id for you ! J.F. -----Original Message----- From: Davis Marques [mailto:davis@mccalldesign.com] Sent: Wednesday, February 12, 2003 4:40 PM To: zope(a)zope.org Subject: [Zope] dtml-sendmail integer required? I just upgraded my Zope from 2.5.1 to 2.6.0 and started receiving this error message from some dtml-sendmail code: Error Type: TypeError Error Value: an integer is required No traceback is given. Here's my original DTML-METHOD <dtml-sendmail mailhost="Mailhost"> To:<dtml-var To> From:<dtml-var From> Date:<dtml-var "_.DateTime()"> Subject:<dtml-var Subject> <dtml-var Message> </dtml-sendmail> I toyed with it for a few hours and the only thing I could conclude was that it doesn't like the Date value (it wants an int, as you can see above), and if I remove the Date field (which isn't required anyway (or is it now?) ) I'm left with the following error message: Error Type: NameError Error Value: global name 'localzone' is not defined I've tried to find the DTML-Sendmail code in the python libraries to see if I could figure out what it wants, but haven't found it yet. Can anyone toss me a clue as to the possible cure/cause for this? D

1 0

dtml-sendmail integer required?
by Davis Marques 12 Feb '03

12 Feb '03

I just upgraded my Zope from 2.5.1 to 2.6.0 and started receiving this error message from some dtml-sendmail code: Error Type: TypeError Error Value: an integer is required No traceback is given. Here's my original DTML-METHOD <dtml-sendmail mailhost="Mailhost"> To:<dtml-var To> From:<dtml-var From> Date:<dtml-var "_.DateTime()"> Subject:<dtml-var Subject> <dtml-var Message> </dtml-sendmail> I toyed with it for a few hours and the only thing I could conclude was that it doesn't like the Date value (it wants an int, as you can see above), and if I remove the Date field (which isn't required anyway (or is it now?) ) I'm left with the following error message: Error Type: NameError Error Value: global name 'localzone' is not defined I've tried to find the DTML-Sendmail code in the python libraries to see if I could figure out what it wants, but haven't found it yet. Can anyone toss me a clue as to the possible cure/cause for this? D

1 0