- Zope - Zope lists

Importing -> Disk full
by Lars H. Korte 23 Oct '02

23 Oct '02

Hi, I'm trying to import a *.zexp File into Zope 2.6 which lies in /opt on a RedHat 7.2. During the import process the filesystem mounted on / gets full !!! Why that? What does Zope do on /, when it's supposed to hold it's data in /opt ? How can I change this? I cannot change the capacity for / !!! Any Ideas? regards Lars

4 6

RE: [Zope] Exsternal method quote
by Passin, Tom 23 Oct '02

23 Oct '02

[ Projekt01, Roger Ineichen] What can I do if I whould return html code frome a external > method? It always quote the return string > Mostly, you should not return html from an external method. Return a string, list, or dictionary and create the html from that using dtml or zpt. That is what they are good at. There can be one exception, and that is if you use the external method to run an stylesheet to transform some xml into html. I do that, and I have never needed anything else but dtml-var. Of course, I still use an older version of Zope, but I do not think that has changed. Cheers, Tom P

1 0

newbie question CMF/Plone
by Fabien Nkundabagenzi 23 Oct '02

23 Oct '02

Hi, Can anybody tell me how to edit a portal_type (like File) to be able to add new properties (metadata) (for example: "geofocus") to the file using CMF/Plone ? Simply adding additional metadata doesn't seem to work. I tried modifying the File.py and the DublinCore.py scripts to include additional entries, and the file_edit_form as well. But when a try to add a File type, it returns the message : Dating not found in 'request/geofocus | here/Geofocus' What else should I do ? Thanks, Fabien.

1 0

Re: [Zope] Idea of Caching DTML Methods in Zope
by Oliver Bleutgen 23 Oct '02

23 Oct '02

Jaroslav Lukesh wrote: > Hi all, > > I have idea about another caching method in Zope. I am very sorry if it > exist, but I dont know that. > > If I have for example very expensive or manytimes called method, I cannot > cache it via RAM cache manager, because it gives the same output regardless > place from where are calling. > > For example, two methods: > > siteroot > <dtml-var BASE1>/ > > localroot > <dtml-in "PARENTS[3:]">../</dtml-in> > > (3 because I use virtual servers as zoperoot/www/domain ) > > So siteroot can be cached via RAM cache manager without no problems, > because constructing URLs are > > <dtml-var siteroot>images/imege.gif > output will > http://www.domain.com/images/imege.gif > > But localroot could not be cached, because i receive bad locations: > > <dtml-var localroot>images/imege.gif > output will > ../../images/imege.gif > > If localroot are cached, then output of that will be same regardless of > calling directory, it is computed from first access. > > So it is possible to do "dynamic" caching? What I mean, is store all > localroot objects in context of calling direcotry (or another object). > > I have few hundreds of calling localroot per page and I will be hapy if it > will have some solution for that. I dont want migrate to siteroot because > it makes absolute URLs, not relative. > > I know, I could use squid and Accelerated cache manager as reverse cache > for caching whole pages, but it is not wanted solution (because you cannot > see immediatelly changes to pages). > > Many thanks for tips or implementation ;-) Why not do <dtml-let my_localroot="PARENTS[3:]"> [use my_localroot 100 times] </dtml-let. But I suspect this is just because you gave a simplified example. See, the problem with your idea is more or less exactliy the same a with the squid solution: you will not see changes on a page immediatly, as the cached method can't really know if the context has changed (in case of your local_root thingy, what happens if you have changed the id of a folder higher up? Actually, because Accelerated Cache Manage can purge pages on the proxy, I think the solution you can get with squid is exactly the same as with your proposed solution - just some magnitudes faster. cheers, oliver

1 0

DTML Calendar tag problem
by Vitor Varalonga 23 Oct '02

23 Oct '02

Hi! I've just installed version 1.0.13 of the DTML Calendar tag on my Zope server. I was trying to build an example page, using this tag, and I noticed the HTML returned is not correctly constructed (a closing table tag is missing or misplaced) and everything looks messed up. Is anyone aware of this bug? kind regards, Vitor Varalonga

1 0

iptables locks out zope ftp
by Roel Van den Bergh 23 Oct '02

23 Oct '02

been on to this for a while but haven't found the solution yet Searching the net I found similar cases but with no answer :-( using iptables we can ftp to the server and access zope ftp through port 8021 but when the ftp program tries to open another port the ftp session is timed-out/blocked. When we disable the firewall we can ftp right into zope And yes we use passive mode Running zope 2.5.1 build from source, pyhon 2.1.3 build from source rpm, redhat 7.3 on dell powerapp 120 What's wrong? TIA, Roel. here is the script I'm using now: #!/bin/sh # Local Settings SYSCTL="/sbin/sysctl -w" IPT="/sbin/iptables" IPTS="/sbin/iptables-save" IPTR="/sbin/iptables-restore" # Internet Interface INET_IFACE="eth0" INET_ADDRESS="x.x.x.x" # Localhost Interface LO_IFACE="lo" LO_IP="127.0.0.1" # Save and Restore arguments handled here if [ "$1" = "save" ] then echo -n "Saving firewall to /etc/sysconfig/iptables ... " $IPTS > /etc/sysconfig/iptables echo "done" exit 0 elif [ "$1" = "restore" ] then echo -n "Restoring firewall from /etc/sysconfig/iptables ... " $IPTR < /etc/sysconfig/iptables echo "done" exit 0 fi # Load Modules /sbin/modprobe ip_tables /sbin/modprobe ip_conntrack /sbin/modprobe ip_nat_ftp /sbin/modprobe ip_conntrack_ftp /sbin/modprobe ip_conntrack_irc if [ "$SYSCTL" = "" ] then echo "1" > /proc/sys/net/ipv4/conf/all/rp_filter else $SYSCTL net.ipv4.conf.all.rp_filter="1" fi # Reset Default Policies $IPT -P INPUT ACCEPT $IPT -P FORWARD ACCEPT $IPT -P OUTPUT ACCEPT $IPT -t nat -P PREROUTING ACCEPT $IPT -t nat -P POSTROUTING ACCEPT $IPT -t nat -P OUTPUT ACCEPT $IPT -t mangle -P PREROUTING ACCEPT $IPT -t mangle -P OUTPUT ACCEPT # Flush all rules $IPT -F $IPT -t nat -F $IPT -t mangle -F # Erase all non-default chains $IPT -X $IPT -t nat -X $IPT -t mangle -X if [ "$1" = "stop" ] then echo "Firewall completely flushed! Now running with no firewall." exit 0 fi # Set Policies $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP # Create a chain to filter INVALID packets $IPT -N bad_packets # Create another chain to filter bad tcp packets $IPT -N bad_tcp_packets # Create separate chains for icmp, tcp (incoming and outgoing), # and incoming udp packets. $IPT -N icmp_packets # Used for UDP packets inbound from the Internet $IPT -N udp_inbound # Used to block outbound UDP services from internal network # Default to allow all $IPT -N udp_outbound # Used to allow inbound services if desired # Default fail except for established sessions $IPT -N tcp_inbound # Used to block outbound services from internal network # Default to allow all $IPT -N tcp_outbound # Drop INVALID packets immediately $IPT -A bad_packets -p ALL -m state --state INVALID -j LOG \ --log-prefix "Invalid packet:" $IPT -A bad_packets -p ALL -m state --state INVALID -j DROP # Then check the tcp packets for additional problems $IPT -A bad_packets -p tcp -j bad_tcp_packets # All good, so return $IPT -A bad_packets -p ALL -j RETURN # bad_tcp_packets chain $IPT -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j LOG \ --log-prefix "New not syn:" $IPT -A bad_tcp_packets -p tcp ! --syn -m state --state NEW -j DROP # All good, so return $IPT -A bad_tcp_packets -p tcp -j RETURN # icmp_packets chain # Time Exceeded $IPT -A icmp_packets -p ICMP -s 0/0 --icmp-type 11 -j ACCEPT # Not matched, so return so it will be logged $IPT -A icmp_packets -p ICMP -j RETURN # TCP & UDP # udp_inbound chain $IPT -A udp_inbound -p UDP -s 0/0 --destination-port 137 -j DROP $IPT -A udp_inbound -p UDP -s 0/0 --destination-port 138 -j DROP # Not matched, so return for logging $IPT -A udp_inbound -p UDP -j RETURN # udp_outbound chain $IPT -A udp_outbound -p UDP -s 0/0 -j ACCEPT # tcp_inbound chain $IPT -A tcp_inbound -p TCP -d 224.0.0.1 -j DROP # Web Server # HTTP $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 80 -j ACCEPT # HTTPS (Secure Web Server) $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 443 -j ACCEPT # FTP Server (Control) $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 21 -j ACCEPT $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 8021 -j ACCEPT # added by PI # FTP Client (Data Port for non-PASV transfers) $IPT -A tcp_inbound -p TCP -s 0/0 --source-port 20 -j ACCEPT $IPT -A tcp_inbound -p TCP -s 0/0 --source-port 8020 -j ACCEPT# added by PI $IPT -A INPUT -p TCP ! --syn --source-port 8021 --destination-port 1024:65535 -j ACCEPT# added by PI # Email Server (SMTP) $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 25 -j ACCEPT # Email Server (POP3) $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 110 -j ACCEPT # Email Server (IMAP4) $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 143 -j ACCEPT # sshd $IPT -A tcp_inbound -p TCP -s 0/0 --destination-port 22 -j ACCEPT # Not matched, so return so it will be logged $IPT -A tcp_inbound -p TCP -j RETURN # tcp_outbound chain $IPT -A tcp_outbound -p TCP -s 0/0 -j ACCEPT # Allow all on localhost interface $IPT -A INPUT -p ALL -i $LO_IFACE -j ACCEPT # Drop bad packets $IPT -A INPUT -p ALL -j bad_packets # Inbound Internet Packet Rules # Accept Established Connections $IPT -A INPUT -p ALL -i $INET_IFACE -m state --state ESTABLISHED,RELATED \ -j ACCEPT # Route the rest to the appropriate user chain $IPT -A INPUT -p TCP -i $INET_IFACE -j tcp_inbound $IPT -A INPUT -p UDP -i $INET_IFACE -j udp_inbound $IPT -A INPUT -p ICMP -i $INET_IFACE -j icmp_packets # Drop without logging broadcasts that get this far. $IPT -A INPUT -p ALL -d 255.255.255.255 -j DROP # Log packets that still don't match $IPT -A INPUT -m limit --limit 3/minute --limit-burst 3 -j LOG \ --log-prefix "INPUT packet died: " # FORWARD Chain # However, invalid icmp packets need to be dropped # to prevent a possible exploit. $IPT -A OUTPUT -m state -p icmp --state INVALID -j DROP # Localhost $IPT -A OUTPUT -p ALL -s $LO_IP -j ACCEPT $IPT -A OUTPUT -p ALL -o $LO_IFACE -j ACCEPT # To internet $IPT -A OUTPUT -p ALL -o $INET_IFACE -j ACCEPT # Log packets that still don't match $IPT -A OUTPUT -m limit --limit 3/minute --limit-burst 3 -j LOG \ --log-prefix "OUTPUT packet died: "

2 2

Zope 2.6.0 Importing 2.5 zexp export files
by Ralph vd Houdt 23 Oct '02

23 Oct '02

Hi All, When I try to import my exported 2.5 Products and ZClasses on a 2.6 installation it give me the error: ImportError: No module named iclass Can anyone give me advice on upgrading to 2.6 without these errors? Greetings Ralph vd Houdt

3 3

size of image in LocalFS
by AM 23 Oct '02

23 Oct '02

Hi, I have a set of images in a LocalFS. I provide links to those images on another page and when a user clicks on those links a small window pops up that displays the image. Is it possible in anyway to figure out the size of the image in advance so that I can size the pop up window to be the same?? TIA AM -- ================================================================== Aseem Mohanty Neurobehavioral Systems Inc, 828 San Pablo Ave, Albany, CA 94706 (R) 510 7696011 (M) 510 3014871 (O) 510 5279231 ================================================================== "I saw `cout' being shifted "Hello world" times to the left and stopped right there!!" -- Steve Gonedes ==================================================================

2 1

Job Board written in Zope available
by lozinski＠openstepnews.com 23 Oct '02

23 Oct '02

www.jobmart.com is a job board written in zope. If anyone is looking for such software, please let me know. Regards Chris 1-510-740-6486 lozinski(a)openstepnews.com lozinski(a)jobmart.com

1 0

Re: zope3.tar.gz
by zope 23 Oct '02

23 Oct '02

Thanks again for your help I downloaded Python 2.2.2 from www.python.org as my machine did not have Python 2.2 And i followed the step by step procedure you had suggested . When I tried to start zope with the command python2.2.2 z3.py it gave me the following error: Traceback(most recent call last): File "z3.py" line 72 in ? run() File "z3.py" in run XMLConfig(os.path.join(dir,'site.zcml'))() File " /Software/Zope3/lib/python/Zope/Configuration/xmlconfig.py",line 221, in __ init__ self.directives) File "/Software/Zope3/lib/python/Zope/Configuration/xmlconfig.py",line 276 , in xmlconfig parser=make_parser() File " /Software/Python-2.2.2/lib/xml/sax/__init__.py",line 93, in make-parser rave SAXReaderNot Available("No parsers found",None) xml.sax._exceptions.SAXReaderNotAvailable No Parsers found Is it because while doing the mak operation in Python I made an erro I used the command >> make makefile=MakeFile Or is there something else I am missing out? Please advice me on what to do next. Thanks for all your help and time you have taken for helping me. Best Regards John Kunchandy > after u download teh tarball to ur system.... > 1)untar it and 'cd' to Zope3 folder > 2)>>python2.2 stupid_build.py > 3)>>mv principals.zcml.in principals.zcml > 4)>>add your userid into principals.zcml ...u can refer > sample.principals.zcml > 5)>>change the HTTP port or browser port in zserver.zcml > 6)>>python2.2 z3.py (this starts zope) > > > thats it > > cheers > > rakesh > > > --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com) Version: 6.0.404 / Virus Database: 228 - Release Date: 10/15/2002

1 0