- Zope - Zope lists

test performance statistics
by Aruna P 18 Sep '02

18 Sep '02

Hi, I am testing a website running on zope(apache and one tesing instance on squid) I was able to generate a few graphs showing http responses vs time etc...i would like to have some more information on how I can analyse and/or use this information in understanding and fine tuning my server performance.Can some body help me or suggest any good sites for this. Thx --------------------------------- Do you Yahoo!? Yahoo! News - Today's headlines

1 0

Parameters for external methods and page templates
by Andreas Tille 18 Sep '02

18 Sep '02

Hello, I'm quiet happy with the example of using External Methods with PIL which can be found at http://www.zopelabs.com/cookbook/1010702887 I can perfectly call this method using <img src="tumb?width=42&height=42"> and get an thumbnail in the size I want it to be. Remark: I had to use a default image name (see below) because I did not found out the correct syntax for specifying an image name. On the other hand I would like to use this external method with pages templates and I failed while having no clue to specify the parameters.s The problem is the first parameter def MakeThumbHi2(self, image="bland.gif", width, height): ^^^^ self. I really have no idea how to put this into the correct syntax from page templates. When reading the Zope Book I noticed that the examples are exclusively realized using Python Scripts and these are glued in a DTML document. Is this the only way to go here to avoid the problem of specifying the "self" argument and arguments of type string? Kind regards Andreas.

3 8

RE: [Zope] Zope couldn't be seen from outside!
by sean.upton＠uniontrib.com 18 Sep '02

18 Sep '02

It could also be noted that there are a myriad of possibilities if this doesn't work. It would be that all incoming ports are blocked by a firewall to your IP, including port 80. It might even be worse, and be NAT'd (network address translation, private IP addr on your box with on-the fly packet proxying, essentially rendering you invisible to the outside world). You best bet is to really, really know your network, or know someone that does. Sean -----Original Message----- From: tell truth [mailto:telltruth99@hotmail.com] Sent: Tuesday, September 17, 2002 7:40 PM To: sean.upton(a)uniontrib.com Subject: RE: [Zope] Zope couldn't be seen from outside! It must be an important tip, isn't it? :) I'll chang the port to 80 and try again. thanks to sean artman >From: sean.upton(a)uniontrib.com >To: telltruth99(a)hotmail.com, zope(a)zope.org >Subject: RE: [Zope] Zope couldn't be seen from outside! >Date: Mon, 16 Sep 2002 19:36:11 -0700 > >Have you considered the possibility of a firewall/router blocking port 8080 >somewhere between point A and point B? > >Sean > >-----Original Message----- >From: tell truth [mailto:telltruth99@hotmail.com] >Sent: Monday, September 16, 2002 7:29 PM >To: zope(a)zope.org >Subject: [Zope] Zope couldn't be seen from outside! > > >Hi! >I'm new to Zope. I've been working on it for 5 days and set up a web site >on it. It works well on my machine(I have a static IP but not a domain name >yet). I visit my web site by typing "http://123.456.789.000:8080/artman", >it works, how excite! >But today, I visit it from another machine through the internet, it seems >something wrong with it. My homepage couldn't be found! >why? do you have any idea for it? would you help me? >The configuration in Z2.py is default, my platform is windows 98 se. >Thanks. > > >artman > > > > >_________________________________________________________________ >与联机的朋友进行交流，请使用 MSN Messenger: >http://messenger.microsoft.com/cn > > >_______________________________________________ >Zope maillist - Zope(a)zope.org >http://lists.zope.org/mailman/listinfo/zope >** No cross posts or HTML encoding! ** >(Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev ) _________________________________________________________________ 享用世界上最大的电子邮件系统― MSN Hotmail。http://www.hotmail.com/cn

1 0

Folderish Product Problems
by Chris A. Bruce 17 Sep '02

17 Sep '02

I am trying to create a Folderish Product that can be accessed via ftp/webdav. I have tried subclassing both (one at a time) ObjectManager and Collection, but when I open the folder in ZMI or ftp, it appears again, nested within itself-it will nest forever. Not sure why? Can someone please offer any advice on why it is doing that? I assume that I am missing a method that needs to be implemented? Thanks, Chris

1 0

RE: [Zope] I can't seem to get site-packages to work under Win32
by Friedlander Paul 17 Sep '02

17 Sep '02

You are right, the debug screen show "sys.path". However, I have tried several times putting the packages into the directory "C:\PROGRA~1\WebSite\bin\lib\site-packages". They all have "__init__.py" and they still can't be found. The only thing that worked was putting them in "C:\PROGRA~1\WebSite\bin\lib". I agree that this shouldn't be. Every other Python installation I have dealt with used the site-packages directory. What I don't know is why or how to change the behavior. And I still can't get the system to find the _image.pyd file. -----Original Message----- From: Dieter Maurer [mailto:dieter@handshake.de] Sent: Tuesday, September 17, 2002 2:43 PM To: Friedlander Paul Cc: 'zope(a)zope.org' Subject: RE: [Zope] I can't seem to get site-packages to work under Win32 Friedlander Paul writes: > The debug screen shows "C:\PROGRA~1\WebSite\bin\lib\site-packages" under > syspath and Look's like you have been a bit careless: If "syspath" is "sys.path", then if you put the packages you want to have in "site-packages" into "C:\PROGRA~1\WebSite\bin\lib\site-packages", then they will be found. Check that each package contains an "__init__.py". Some archivers delete empty file on unpacking. This causes Python not to recognize a package. Dieter

1 0

Re: [Zope] Diacriticals in ZMI
by Jaroslav Lukesh 17 Sep '02

17 Sep '02

| Odesílatel: Charlie Reiman <creiman(a)kefta.com> | My problem is the ZMI doesn't seem to be setting an encoding. Mozilla 1.1 | notices this and displays all 8 bit characters as '?'. So 'Re'sume`' now | shows up as 'R?sum?'. This is my question before few days: Regards JL. ---------- | Odesílatel: Dieter Maurer <dieter(a)handshake.de> | Jaroslav Lukesh writes: | > I have problem with codepage. I have set "Lang" property in z2.py, it works | > OK with codepage sensitive methodl like StructuredText. But I need to set | > codepage in manage_edit and other pages (all :-) that string in head | > section: | You can add it in 2 places: | | * your "standard_html_header" (or "standard_template") to take care | of your own pages | | * "<zopedir>/lib/python/Application/dtml/manage_tabs.dtml" to | take care of most management pages. | | Unfortunalely, there are some pages not covered by these too places, | mostly forms to add objects. For some unknown reason, the do not | use a standard header but come as pure HTML files. | | | Dieter |

1 0

How to get document's owner and last edited by with ZCatalog?
by Jaroslav Lukesh 17 Sep '02

17 Sep '02

Hi all, I am very sorry for that easy question. <dtml-if owner_info><dtml-with owner_info mapping>owned by &dtml-id; (&dtml-path;).</dtml-with ><dtml-else>unowned.</dtml-if> I was try with ZCatalog searching and it ignores all real ownerships and print it as my own. I was try to play with "zaprdek.owner_info()['id']" but it gives me error with ZCatalog question like that: <dtml-in "zaprdek(bobobase_modification_time=_.DateTime() - 30, bobobase_modification_time_usage='range:max')" sort=bobobase_modification_time reverse> <dtml-var bobobase_modification_time fmt="%d-%m-%y %H:%M"> <a href="&dtml-getURL;/manage"> <dtml-var "zaprdek.getpath(data_record_id_)"></a> <dtml-if owner_info><dtml-with owner_info mapping> <dtml-id> (<dtml-path>).</dtml-with><dtml-else> unowned.</dtml-if> <br> </dtml-in> Many thanks for your help. Sincerelly, J. Lukesh

1 0

Cookie authentication
by Ulrich Wisser 17 Sep '02

17 Sep '02

Hello, I tried now CookieCrumbler and exUserFolder with cookie authentication. Basic authentication works fine, but whenever I select Cookie authentication I do get indefinte redirects. I use Zope 2.5.1 behind Apache with VirtualHostMonster. Any ideas? Thanks Ulrich

4 3

Unauthorized error
by Chris Africa 17 Sep '02

17 Sep '02

Well, my student programmer is gone and now suddenly my financials site is not working. It spontaneously asks me to log in, and then gives me an error when I try to view the page. Here's the traceback in the HTML source:  It looks like an unauthorized error, but I'm the site manager and I haven't restricted access to any pages for myself. This happens randomly throughout my site, including when I just try to go back to the main manage page and have just logged in. In other words, it seems to be forgetting that I'm the manager who has already logged in. I don't know where to start fixing this problem. Can someone give me an idea? Thanks! -- Chris Africa University of Michigan College of Engineering Department of Mechanical Engineering Webmaster/Coordinator, Information Services 734.764.8482

3 6

Re: Page Templates in products
by Paul Tiemann 17 Sep '02

17 Sep '02

Regarding the HTMLFile class, allowing you to store product dtml files on the local filesystem: >So my question is, is there a way to do a similar thing with the source >of the file being a page template rather than DTML? Sure thing, just like this: from Products.PageTemplates.PageTemplateFile import PageTemplateFile myZPT = PageTemplateFile("path/to/file", globals()) Which will take file.zpt from the filesystem just like HTMLFile() does for .dtml files... ;) Paul

1 0