- Zope - Zope lists

GenericUserSource and LoginManager
by CJ Kucera 26 Oct '01

26 Oct '01

Okay, so now I'm playing around with LoginManger, which is finally installed correctly (or so it seems), but when I go to add a new LoginManger, the list of User Sources is blank. Many pages I've found tell me that LoginManager comes with a default kind of Source called "GenericUserSource," and I looked in the LoginManager product directory under lib/python/Products and it LOOKS like GenericUserSource is there, but I can't actually find it inside Zope. The Control Panel says that both ZPatterns and LoginManager are installed correctly: ZPatterns (Installed product ZPatterns (ZPatterns-0-3-0)) LoginManager (Installed product LoginManager (LoginManager-0-8-6)) If someone could help me out here, I'd really appreciate it. Thanks, CJ WOW: Rapacious | A priest advised Voltaire on his death bed to apocalyptech.com/wow | renounce the devil. Replied Voltaire, "This pez(a)apocalyptech.com | is no time to make new enemies."

1 0

Patches for WebDAV and Windows XP
by Andreas Jung 26 Oct '01

26 Oct '01

Just for your information: The current Zope versions will not work with Windows XP through WebDAV. The CVS trunk and Zope-2_4-branch now contain patches to lib/python/OFS/ObjectManager.py and lib/python/OFS/PropertySheets.py to fix this problem. Andreas --------------------------------------------------------------------- - Andreas Jung Zope Corporation - - EMail: andreas(a)zope.com http://www.zope.com - - "Python Powered" http://www.python.org - - "Makers of Zope" http://www.zope.org - - "Endings are just Beginnings" - ---------------------------------------------------------------------

1 0

(no subject)
by Oliver Erlewein 26 Oct '01

26 Oct '01

Hi Tony The Values I had were: (Sun 2.8, Python2.1, 4 Processor) creating task 1 creating task 2 creating task 3 creating task 4 creating task 5 creating task 6 creating task 7 creating task 8 creating task 9 creating task 10 waiting for all tasks to complete task 1 will run for 6.7 sec task 2 will run for 4.3 sec task 3 will run for 7.3 sec task 4 will run for 9.3 sec task 5 will run for 1.1 sec task 6 will run for 4.5 sec task 7 will run for 4.1 sec task 8 will run for 3.9 sec task 9 will run for 6.3 sec task 10 will run for 5.8 sec task 5 done task 8 done task 7 done task 2 done task 6 done task 10 done task 9 done task 1 done task 3 done task 4 done all tasks done And for the Sun 2.7, Intel 1xProcessor: creating task 1 creating task 2 creating task 3 creating task 4 creating task 5 creating task 6 creating task 7 creating task 8 creating task 9 creating task 10 waiting for all tasks to complete task 1 will run for 0.1 sec task 2 will run for 5.0 sec task 3 will run for 4.4 sec task 4 will run for 1.3 sec task 5 will run for 4.0 sec task 6 will run for 3.8 sec task 7 will run for 4.0 sec task 8 will run for 5.6 sec task 9 will run for 2.2 sec task 10 will run for 1.2 sec task 1 done task 10 done task 4 done task 9 done task 6 done task 5 done task 7 done task 3 done task 2 done task 8 done all tasks done Does that help at all? What did I prove with that? Whats this ***Barrier*** thing? I'll test on my private Linux box on the weekend. Regards Oliver -- GMX - Die Kommunikationsplattform im Internet. http://www.gmx.net

1 0

disc files inner methods
by Clark OBrien 26 Oct '01

26 Oct '01

Guys, I would really like to see some direction as to whether to use disk files for inner methods. Zope is a great tool but until we have some good IDEs for it, it will not compete with better known technologies. I have spoken with the Karmira and Wing and they both told me the same thing- They are waiting to see how Zope stores the inner methods. Regards Clark

3 2

Chicken or Egg Syndrome
by Ben Ocean 26 Oct '01

26 Oct '01

Hi; I want to simply_and_elegantly achieve the following: 1. Ping the visitor's browser to determine screen resolution (easy: I know how to capture this). 2. Redirect them to a folder such as 800 or 1024 depending on the res (easy again). 3. Assign a variable within that folder via a dtml method that will be used to size elements such as image width and height (easy again). 4. Place all the documents that will need that variable in a lower folder, so that I don't have to copy all the dtml documents into folders 800 and 1024 (ah: not so easy! at least not for me). The problem appears to be that I need to cull a variable out of a Javascript that I can in turn utilize in a dtml method.So, how do I do this? TIA, BenO

3 2

Redirect to a specific page
by Konstantinos Margaritis 26 Oct '01

26 Oct '01

Hi, Is it possible to redirect to a specific page no matter what the user asks for? I mean the browser could request the url http://foo.bar.com/luser and I would redirect it to http://foo.bar.com/template?username=luser The problem is that when I request a URL that doesn't exist it reports a 'Not found' error. -- Konstantinos Margaritis Bullet S.A.

8 10

Problem with 2.4.2 installation: RegexObject fails using old Data.fs
by dudek＠cim.mcgill.ca 26 Oct '01

26 Oct '01

When I moved to zope 2.4.2 things looked OK. I copied all my old products in one-by-one OK too. Then I copied over my old Data.fs from my 2.3.2 installation. Whoops... This leads to quite a few errors of the form: 2001-10-26T14:30:08 ERROR(200) ZODB Couldn't load state for '\x00\x00\x00\x00\x00\x00l\x8b' Traceback (innermost last): File /usr/share/Zope-2.4.2-linux2-x86/lib/python/ZODB/Connection.py, line 544, in setstate SystemError: Failed to import class RegexObject from module re I know that this is the new regexp mechanism, but don't know which old product or item may be failing, or how to track down the problem. After the 2.4.2 install I tried the installation Data.fs without difficulties. Any hints are desperately and gratefully needed. Thanks, Greg

1 0

Problem with 2.4.2 installation: RegexObject fails using old Data.fs
by dudek＠cim.mcgill.ca 26 Oct '01

26 Oct '01

When I moved to zope 2.4.2 I copied over my old Data.fs This leads to quite a few errors of the form: 2001-10-26T14:30:08 ERROR(200) ZODB Couldn't load state for '\x00\x00\x00\x00\x00\x00l\x8b' Traceback (innermost last): File /usr/share/Zope-2.4.2-linux2-x86/lib/python/ZODB/Connection.py, line 544, in setstate SystemError: Failed to import class RegexObject from module re I know that this is the new regexp mechanism, but don't know which old product or item may be failing, or how to track down the problem. After the 2.4.2 install I tried the installation Data.fs without difficulties. Any hints are desperately and gratefully needed. Thanks, Greg

1 0

How to automagically wrap any dtml-doc with std_header/footer
by Dario Lopez-Kästen 26 Oct '01

26 Oct '01

Hello! How do I go about to create the following situation: I want every dtml-method/document that is called from a browser to be wrapped with standard_html_header or standard_html_footer, even if there are no <dtml-var standard_html_...> tags in them. Just to clarify my question - I have a document "foo": --- <h1>Foo rules!</h1> <dtml-stuff expr="goes here" ...> <p>blah!</p> --- that does not include std_header/footer and when called by http://bar/foo it should be returned to the browser as if it had looked like this: --- <dtml-var standard_html_header> <h1>Foo rules!</h1> <dtml-stuff expr="goes here" ...> <p>blah!</p> </dtml-var standard_html_footer> --- ZPT/TAL or CMF answers need not apply, as they are (in our opinion, anyway) too un-mature at this point to be usable for our particular project. Any help appreciated. Sincerely, /dario - -------------------------------------------------------------------- Dario Lopez-Kästen Systems Developer Chalmers Univ. of Technology dario(a)ita.chalmers.se ICQ will yield no hits IT Systems & Services

5 7

RE: [Zope] Zope Eats Memory
by sean.upton＠uniontrib.com 26 Oct '01

26 Oct '01

I would think you could do this with <dtml-let> wrapped around your DTML-call, not that this is entirely graceful? Sean -----Original Message----- From: Tommy Johnson [mailto:tommy@7x.com] Sent: Thursday, October 25, 2001 1:14 PM To: Zope List Subject: RE: [Zope] Zope Eats Memory > you can call a dtml-method like a function with parameters > > dtml-method 1 called callTest: > <dtml-var standard_html_header> > <dtml-var param1><br> > <dtml-var param2><br> > <dtml-var standard_html_footer> > > you call this method like so: > <dtml-var "callTest(None,_,param1=21, param2='was called from far')"> > > Robert Yes, I do that alot too. Thought it was preety cool when I first found out. Now, it's a lifesaver. But, I still need to set REQUEST variables, because they represent the parameters I'm passing. Your example: <dtml-var "callTest(None,_,param1=21, param2='was called from far')"> Mine: <dtml-var "REQUEST.set('departmentID', '17')"> <dtml-var "REQUEST.set('categoryID', '2')"> <dtml-var "REQUEST.set('productID', '21')"> <dtml-var "callTest(None,_,param1=departmentID, param2=categoryID, param3=productID)"> Usually, I'll need to set those variables before calling the method. That way not only is the method dynamic, but the actual call to the method is dynamic as well. Tommy Innovation: The Best Way To Predict The Future ... Is To Create It. _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

3 2