- Zope - Zope lists

RE: [Zope] Listening on specific interfaces
by Pearson, Brian Edward (GEA, 056278) 01 Mar '00

01 Mar '00

> I want to be able to have Zope listen to a specific network interface, i.e. > - a virtual IP address that has been created on the server. This will allow > me to have multiple Zope sites running on the same machine. How can this be > accomplished? Any/all suggestions are greatly appreciated. >> You could run Zopes behind an Apache server and connect via ProxyPass or >> FastCGI. This would even allow virtual servers on one IP address. Frank, I agree, however I probably should have been more specific. I would like to be able to do this using ZServer rather than using Apache or in my case Netscape Enterprise Server. Do you know if ZServer supports this? Thanks again, -Brian > -----Original Message----- > From: Frank Tegtmeyer [SMTP:fte@d.de.mqi.net] > Sent: Wednesday, March 01, 2000 12:08 PM > To: zope(a)zope.org > Subject: Re: [Zope] Listening on specific interfaces > > > I want to be able to have Zope listen to a specific network interface, > i.e. > > - a virtual IP address that has been created on the server. This will > allow > > me to have multiple Zope sites running on the same machine. How can > this be > > accomplished? Any/all suggestions are greatly appreciated. > > You could run Zopes behind an Apache server and connect via ProxyPass or > FastCGI. This would even allow virtual servers on one IP address. > > Regards, Frank > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Re: [Zope] ZODB & large files
by Tres Seaver 01 Mar '00

01 Mar '00

ethan mindlace fremen <mindlace(a)imeme.net> wrote: > > Zopistas, > > I'm setting up zope on a linux box with support for large files. > (>2gb). I need to make sure that the ZODB will continue to work > properly past this point. Is the filesystem stuff the ZODB does handled > by python or ZODB? > > If the answer is ZODB, where can I look for fs calls to make sure > they're 64 bit? The ZODB uses a "pluggable" Storage-derived object to do the actual reads/writes (this is where Ty Sarna's BSDDB Storage gets plugged in). The "standard" Storage is the FileStorage, defined in $ZOPE_HOME/lib/python/ZODB/FileStorage.py. -- ========================================================= Tres Seaver tseaver(a)palladion.com 713-523-6582 Palladion Software http://www.palladion.com

1 0

bobobase_modification_time syntax
by Timothy Wilson 01 Mar '00

01 Mar '00

Hi everyone, I've grepped through the source and consulted the ZQR, but I still haven't figured out how to use bobobase_modification_time. I've got a directory with a file object, and I'd like index_html to display when that file object was last modified. I've tried all manner of syntax combinations, but I can't get it to refer to the modification time of a given object and not just the modification time of index_html. Suggestions? -Tim -- Tim Wilson | Visit Sibley online: | Check out: Henry Sibley HS | http://www.isd197.k12.mn.us/ | http://www.zope.org/ W. St. Paul, MN | | http://slashdot.org/ wilson(a)visi.com | <dtml-var pithy_quote> | http://linux.com/

1 0

Re: [Zope] I got it!
by Tres Seaver 01 Mar '00

01 Mar '00

glyph(a)twistedmatrix.com wrote: > > On 29 Feb, I wrote: > > > Okay. Perhaps someone else on the list can answer this one then: I > > have a standard Debian install of Zope. ZServer works fine. Apache > > works fine. Zope shows up fine in apache. Except... I can't log in. > > At all. With any username. What do I have to do to get Apache to > > recognize Zope's authentication? > > Just to follow up to myself so you know: I have seen snippets about > RewriteRules all over the place for using Apache with Zope... > > I have tried everything i've found, and nothing has worked so far. > (The RewriteRules appear to do nothing at all...) If you want to stick with Basic HTTP Authentication, the key is to persuade Apache to pass that info through. On my setup, this involves adding the following to the "RewriteRule" line: [e=HTTP_CGI_AUTHORIZATION:%1,t=application/x-httpd-cgi,l] Also, the "RewriteCond %{HTTP:Authorization} ^(.*)" line has to be repeated before *each* rule to which you want it to apply. -- ========================================================= Tres Seaver tseaver(a)palladion.com 713-523-6582 Palladion Software http://www.palladion.com

1 0

Dates
by Joshua Brauer 01 Mar '00

01 Mar '00

I've got a calendar setup that displays three calendars, last month, this month and next month.... currently I use this call: <dtml-call "REQUEST.set('date-nextMonth', '2000-4-1')"> I've never had success at automatically setting the date as one month from now... Anybody know how to do this? Josh ------------------------------------------------- Joshua Brauer Computer Support Scientist Department of Biochemistry and Molecular Biology Colorado State University Fort Collins, CO 80523 (970) 491-1080 ------------------------------------------------- Fax or Voice mail toll free 888-392-4832, ext. 291-345-5142 ------------------------------------------------- Direct Fax (419) 793-4120 -------------------------------------------------

1 0

strange blockings
by Tino Wildenhain 01 Mar '00

01 Mar '00

Hello there, we got a site up and running (its actually a shop solution based on zope). Platform is NT, zope version is 2.1.4. Most of the time, the site is running very fast. But some times it hangs. It does not use much processor-time at this moment (arount 14%) but it does not process any requests for some seconds. Its very annoying. Does anyone know how to avoid such behavior? tia Tino Wildenhain

2 2

ODBC + Zope + UNIX
by Andrew Kenneth Milton 01 Mar '00

01 Mar '00

What is required to get ODBC under UNIX functioning using e.g. the iODBC drivers? Is it just a matter of pulling down the winODBC driver and making it work, or is there some devil magic required (i.e. do I have to commit weeks, rather than days to it). I do have a black robe, plenty of chickens, and a goat. -- Totally Holistic Enterprises Internet| P:+61 7 3870 0066 | Andrew Milton The Internet (Aust) Pty Ltd | F:+61 7 3870 4477 | ACN: 082 081 472 | M:+61 416 022 411 | Carpe Daemon PO Box 837 Indooroopilly QLD 4068 |akm(a)theinternet.com.au|

2 1

Re: [Zope] Squishdot issue?
by Chris Withers 01 Mar '00

01 Mar '00

Doh! Forgot to cc this to the list, in case anyone else has the same problem... -------- Original Message -------- From: Chris Withers <chrisw(a)nipltd.com> Subject: Re: [Zope] Squishdot issue? To: "Pearson, Brian Edward (GEA, 056278)" <BRIAN.PEARSON(a)APPL.GE.COM> Brian, I think it's a permissions thing with tinytable. There's a permission called something like 'access tinytable contents' which you need to give to the anonymous user in the squishdot folder. Well, that's how I cracked it, anyway... cheers, Chris "Pearson, Brian Edward (GEA, 056278)" wrote: > > All - I just started working with Zope a couple of months ago. Recently, at > Zope version 2.1.2 I added the TinyTable and Squishdot products to my > installation. I was able to create a Squishdot object and customize. No > problems.... > > However, I am now running a fresh installation of Zope version 2.1.4 (same > Squishdot version 0.3.2) and have once again created a Squishdot object > inside a Folder object. Well, when trying to access the Squishdot object > from a browser, I am prompted with a sign-in box. I have not created an > ACLUSERS object so by default anyone should be able to view the object > without needing to authenticate. > > This is probably something stupid and easy to fix, but I cannot find the > solution. Does anyone have a suggestion? Your help would be greatly > appreciated. > > Thanks, > -Brian > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Best way to run Zope for hosting apps by multiple developers?
by Nicholas Dobbing 01 Mar '00

01 Mar '00

Hi, The University of Guelph is looking at making Zope hosting available to our departments and organisations. Because we want to be able to use MS Access databases, we propose to run Zope on NT (so that we can use Z ODBC). In essence, we're looking at using Zope within an ISP hosting model, where we will provide the infrastructure and our clients will do their own development. I'm trying understand how to design a Zope system to achieve two things: 1, make it less likely that a poorly written app will compromise the service for other developers, and 2, establish a test environment where applications can be debugged, and then moved to a production server. I have two questions: 1. I've read the FAQ for ISP's, and I've seen references in the documentation to ways of configuring a system so that Zope so that each client gets their own instance of Zope. This would presumably help to insulate one Zope app from another. However, I can't find any details about how that's done... can anyone point me to more info? 2. Given developers with administrative control of their own folders on two Zope servers (test and production), how can I make it possible for them to take a test application (consisting of a set of Zope objects, let's say within one Zope folder object), and move it to a production Zope server. I can do this by exporting from one Zope server and importing into another, but this involves giving the developers access to the file system (they must place their exported object in the "import" directory on the target Zope server), and all developers will be dropping their objects in the same place. It's not elegant, and I can foresee various management problems and security risks arising from it. Are there other ways to migrate a Zope application from one Zope server to another? Thanks in advance for any pointers, Nick Dobbing. ndobbing(a)uoguelph.ca | (519) 824-4120 x6044 Computing & Communications Services www.uoguelph.ca/ccs/ University of Guelph

2 1

Help: Sending Batch Email
by bens＠workmail.com 01 Mar '00

01 Mar '00

Has anyone done any mass emailing from Zope? I have an external method that tries to loop over a bunch of Member Objects and send an email to each. Unfortunately it is not working. What it does is sometimes send an email to the first member most of the time it sends no email at all. Here is my External Method. Any help would be greatly appreciated. def doSpam(self): """ sends mail to all Members """ if self.MailHost: for id, object in self.members.objectItems('member'): mail=self.SPAMLetter(self, None, username=object.username, password=object.password, email_address=object.email_address) mhost=self.MailHost mhost.send(mail) return "Mail Sent"

1 0