- Zope - Zope lists

RE: [Zope] GenericUserFolder authenticates but Zope rejects
by Chris McDonough 01 Dec '99

01 Dec '99

Does the document that you're trying to point jorge to have standard_html_header and standard_html_footer? If so, try taking them out and authenticating again.... Chris McDonough mailto:chrism@digicool.com Digital Creations http://www.digicool.com Publishers of Zope http://www.zope.org > -----Original Message----- > From: Andres Corrada [mailto:andres@corrada.com] > Sent: Wednesday, December 01, 1999 9:05 AM > To: zope(a)zope.org > Subject: [Zope] GenericUserFolder authenticates but Zope rejects > > > Hi, > > I've set-up GUF on a sub-folder of a site. This is the > initial stage of > installation so I'm just testing that I can log in as > jorge:secret. GUF > authenticates jorge but I get a rejection by Zope saying I did not > provide the correct username and password. Anonymous has no rights on > the subfolder. So I allow Anonymous to have view rights: Zope rejects > again saying I'm not authorized to access "title_or_id". What > permissions have to be set? Any documentation on this? > > ------------------------------------------------------ > Andres Corrada-Emmanuel Email: andres(a)corrada.com > Owner http://www.corrada.com/mamey > Mamey Phone: (413) 587-9595 > ------------------------------------------------------ > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > No cross posts or HTML encoding! > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev ) >

2 1

Re: [Zope] GenericUserFolder authenticates but Zope rejects
by Andres Corrada 01 Dec '99

01 Dec '99

Hi, David thank you for the tip. But that doesn't work either. If I only set "Access Contents Information" I get rejected by Zope although GUF authenticated me. If I set "View" and "Access..." permissions I can access the index_html in the folder without any authentication. These tests were all done after shutting down Zope and my browser. ------------------------------------------------------ Andres Corrada-Emmanuel Email: andres(a)corrada.com Owner http://www.corrada.com/mamey Mamey Phone: (413) 587-9595 ------------------------------------------------------

1 0

Problem with new Sybase DA
by Gerard Rowe 01 Dec '99

01 Dec '99

Hello everyone, I just got the new DA for Sybase 11.9.2 and installed it without any errors (I even imported the module into python successfully). Now when I try to run ./start, I hear some activity from the hard drive but the prompt returns and nothing is started. Anytime I delete the file sy_occ.so from the product directory, Zope starts just fine. This is what I have: SuSE Linux 6.2 Python 1.5.2 Zope 2.01 Sybase DAv2 Any help will be greatly appreciated.

4 14

Questions...
by Winston Dhanraj 01 Dec '99

01 Dec '99

hi, i'm a newbee to Zope . i'd like to know what purposes can a Z Class serve ? i've also been working on maintaining state ie session for a visitor. how do i go about doing something like, displaying to a visitor the number of times he has visited a particular page. please help.... bye, winston

4 4

Subject: RE: [Zope] Connecting to Ms Access w/ Zope?
by Andy Pahne 01 Dec '99

01 Dec '99

Michael Maier wrote: > How do I connect to an MS Access DB using Zope? I understand the difficuties very well. I have a database system-dsn connection with my MS Access database established, but I can't add any other database-connection anywhere. There's only this Gadfly example stuff. Chris McDonough wrote: > Install the ZODBC database adapter > (http://www.zope.org/Products/DA/ZODBCDA) and > follow the directions which come with it... Nitin Borwankar wrote: > It is also necessary to create the DSN as a "System DSN" > rather than a "User DSN". > Only the System DSN's are visible to Zope in the ZODBCDA. That's what I did, but nothing happened. What shold I do now? By the way, I had problems extracting the .gz -archive with Winzip 7.0. I used gunzip (on my Linux-box) to unzip it and the copied the whole stuff into ...zope\lib\python. Anybody had the same problems? Andy Pahne

1 0

Howto redefine a variable value
by Felipe Alvarez Harnecker 01 Dec '99

01 Dec '99

Inside a DTML document i want to do this $var = 'bar' if $var eq 'foo'; sorry about my perlish orientation. read the guide, nothing found. Thanks. -- ______________________________________________________ Felipe Alvarez Harnecker. QlSoftware. Tel. 09.874.60.17 e-mail: felipe.alvarez(a)qlsoft.cl Potenciado por Ql/Linux http://www.qlsoft.cl ______________________________________________________

2 2

Update on Roxen/Zope Integration
by Bill Anderson 01 Dec '99

01 Dec '99

Well, after fighting with it for a while, I now have a much improved HOWTO on how to integrate Roxen and Zope. The Big change is in the rewrite rules. They are much easier (IMO) to maintain. You can see it here: http://www.aope.org/Members/Bill/Documentation/RoxenZope Bill -- "They laughed at Columbus, they laughed at Fulton, they laughed at the Wright brothers. But they also laughed at Bozo the Clown." -- Carl Sagan

3 4

Zope/Roxen integration
by Tony McDonald 01 Dec '99

01 Dec '99

People wanting to play with Zope and Roxen will need to do something to the Roxen src code to get Zope CGIs to work correctly; it's detailed below (sorry, not enough time to write up a HowTo just yet!). After banging my head against a wall for a while I've munged together a fix. Get into cgi.pike in modules/scripting and do this (around line 495); sorry, I'm no good with 'diff'! case "location": code = "302 Redirection"; result += header+": "+value+"\r\n"; break; ++added++ case "content-length": break; ++added++ default: result += header+": "+value+"\r\n"; break; Yes, this is a hack and an awful one, but it works. Along with using the Redirect module (which is a pain!), I now have a Zope backend, Roxen frontend that uses real URLs (ie no Zope.cgi stuff in it). I really find it weird that noone else has noticed this behaviour in using CGI scripts and Roxen. You'll need to read up on the excellent Zope How-Tos that Magnus <http://www.zope.org/Members/magnus/Roxen> and Bill <http://www.zope.org/Members/Bill/Documentation/RoxenZope> have written before you'll be able to get a Zope-Roxen combination working though. hth tone. ------ Dr Tony McDonald, FMCC, Networked Learning Environments Project http://nle.ncl.ac.uk/ The Medical School, Newcastle University Tel: +44 191 222 5888 Fingerprint: 3450 876D FA41 B926 D3DD F8C3 F2D0 C3B9 8B38 18A2

1 0

RE: [Zope] ZCatalog: No Space Left on Device
by Michel Pelletier 01 Dec '99

01 Dec '99

> -----Original Message----- > From: Martijn Faassen [mailto:m.faassen@vet.uu.nl] > Sent: Tuesday, November 30, 1999 12:49 PM > To: zope(a)zope.org > Subject: [Zope] ZCatalog: No Space Left on Device > > > Hi there, > > Sometimes when I'm ZCatalogging (in Zope 2.0.1) a lot of objects it > aborts (after a long time) with 'no space left on device'. This while > there is still over a 100 megs of space on the drive. Anyone have any > clue what this means? ZCatalog uses subtransactions, which are temporary miniature 'commits' to the ZODB so that memory doesn't grow beyond physical limits when changing lots and lots of objects in one transaction. When a subtransaction is commited, it allows the ZODB to move those 'sub-commited' objects to a temporary file if memory gets tight. This temporary file is probably filling up your /tmp filesystem. The solution is to set your commit threshold much higher, ie, commit sub-transactions less frequently. -Michel

2 1

AAagghhh!!!
by Sam Gendler 01 Dec '99

01 Dec '99

If I do a <dtml-var DestinationURL>, It prints "http://desktop:8080" However, if I say <dtml-call "RESPONSE.redirect(DestinationURL)">, I wind up at http://desktop:8080/manage_addProduct/AMDAMethod/MethodClass_factory/%3cPyt…, which doesn't exist. Why?

3 3