- Zope - Zope lists

RE: [Zope] Problem to log out from CMF Site
by sean.upton＠uniontrib.com 20 Feb '03

20 Feb '03

Consider using Shane's tcpwatch program: http://hathaway.freezope.org/Software/TCPWatch -----Original Message----- From: Mico Siahaan [mailto:mico@cbn.net.id] Sent: Thursday, February 20, 2003 10:17 AM To: Zope Mailing List Subject: Re: [Zope] Problem to log out from CMF Site On Wed, 2003-02-19 at 13:32, Dieter Maurer wrote: > Mico Siahaan wrote at 2003-2-19 04:31 -0500: > > .... > > Btw, here I the complete error message. Can you figure out something? I > > still have this problem when I tried to logged out from my CMF site. > > > > -- > > Exception traceback > > ... > > Exception Value > > Invalid authentication token > > > > Traceback (innermost last): > > > > Module ZPublisher.Publish, line 89, in publish > > Module ZPublisher.BaseRequest, line 409, in traverse > > Module AccessControl.User, line 627, in validate > > Module AccessControl.User, line 567, in identifyBad Request: Invalid authentication token > > The code there looks like: > > if auth and auth.lower().startswith('basic '): > try: name, password=tuple(decodestring( > auth.split(' ')[-1]).split(':', 1)) > except: > raise 'Bad Request', 'Invalid authentication token' > return name, password > > Thus, the browser sends "basic" authentication information > with an invalid format. > Check your browser. > > BTW, you will not be able to log out of the CMF when you > use basic authentication as only the browser can reset > the corresponding login info. > > > Dieter How can I check whether my browser sends an invalid format ir not? I'm using Galeon 1.03 on Linux. Can you give me more explanations about: 'basic authentication as only the browser can reset login info'. What does this phrase mean? :) Thanks. -- mico(a)cbn.net.id --- Ph. 62-22-2505549 ICQ #12521756 _______________________________________________ Zope maillist - Zope(a)zope.org http://mail.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://mail.zope.org/mailman/listinfo/zope-announce http://mail.zope.org/mailman/listinfo/zope-dev )

1 0

Zope on AIX
by wolfgangtex＠netscape.net 20 Feb '03

20 Feb '03

Hi, I run into the same problem that has been reported last year: Author:Jan Idzikowski Date: 04/24/2002 10:50 AM View: [Zope] Problems with AIX4 There never was an answer from anybody. I installed Python 2.1.3 and Zope-2.6.1 on AIX4.3.3 and I run into exactly the same scenario as Jan. ZServer starts up OK and I can login and bring up the control panel. I can also add folders. When I try to access /Examples or when I try to add the ZopeTutorial, Zope core dumps. When I run with the dbx debugger, I see that the runtime stack is busted. Usually with AIX there tend to be problem with shared libs. That doesn't seem to be the case here as I can successfully run all unit tests "testrunner.py". Is there anybody out there who was able to circumvent this problem? What would people suggest is a good way to debug this? Thanks! Wolfgang __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/

1 0

Re: [Zope] Mailhost strangeness
by Lennart Regebro 20 Feb '03

20 Feb '03

Kevin Carlson wrote: > At seeming random times, a Mailhost object becomes corrupted and does not allow the sending of mail. I get an error that states "integer expected" -- see full traceback below. Enter the MailHost and press 'Change' to re-save the settings. Or upgrade to 2.6.1. In fact, do both. :) > According to the source code it looks like the port number is becoming corrupted. To solve the problem, all I have to do is open the Mailhost object and save it. Strange. Are you sure it gets to be a string again? That should only happen if you upgrade from 2.5.x or import an 2.5.x exported mailhost. For some reason, the port number was changed from an int to a string in 2.5.1, and this got reverted in 2.6.0 without anybody noticing.:) In 2.6.1 it should be an integer, but will not fail if it is a string.

1 0

Roles and LDAP
by Antonio Beamud Montero 20 Feb '03

20 Feb '03

Hi all: Anybody knows how to store roles in a LDAP server? i.e. I want to specify in a record in a LDAP server all the methods a Role can use... I want to store all user/roles information in a LDAP database... I this posible? Thanks

2 1

Why initializeBasesPhase1 and 2
by D2 20 Feb '03

20 Feb '03

I noticed that in some products' __init__.py module there's a call to initializeBasesPhase1 and 2 to register a base class as a Zclass. That's true in CMFCore, CMFDefault, CMFPlone for example and not in DCWorkflow and Localizer. in newer cases, createZClassForBase is used instead. So, why is it necessary to register a Zclass for some products and not for others ? TIA -- Andre PZP Enthusiast

1 1

Mailhost strangeness
by Kevin Carlson 20 Feb '03

20 Feb '03

At seeming random times, a Mailhost object becomes corrupted and does not allow the sending of mail. I get an error that states "integer expected" -- see full traceback below. According to the source code it looks like the port number is becoming corrupted. To solve the problem, all I have to do is open the Mailhost object and save it. Strange. I am using Zope 2.6.0 with Python 2.1.3 and was wondering if anyone else has seen this behavior or has any ideas as to what could cause this. Thanks, Kevin <Partial Traceback> * ....Module Script (Python), line 131, in sendDocNotifications *<PythonScript at /NPR/CEW/sendDocNotifications>* *Line 131* * Module Products.MailHost.MailHost, line 125, in send * Module Products.MailHost.MailHost, line 144, in _send * Module smtplib, line 187, in __init__ * Module smtplib, line 222, in connect TypeError: an integer is required </Partial Traceback>

1 0

Creating a group of users
by Asad Habib 20 Feb '03

20 Feb '03

Hello. Does anyone know if it is possible to create a groups of users in Zope and then assign a role to the group that would then be inherited by its members? Any help would be appreciated. Thanks.

2 3

RE: [Zope] FW: HELP !!!
by Chris McDonough 20 Feb '03

20 Feb '03

Not without someone to volunteer to compile a largefile version of Python for you. I'd ask around on comp.lang.python. - C On Thu, 2003-02-20 at 09:36, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > I am so sorry to bother you with that but unfortunately it's windows system > and I installed the standalone version of Plone with zope. > > Can I do it anyway ??? > > thx > > -----Original Message----- > From: Chris McDonough [mailto:chrism@zope.com] > Sent: Donnerstag, 20. Februar 2003 15:25 > To: TANNERT,CARSTEN " "(HP-Germany,ex1) > Cc: zope(a)zope.org > Subject: RE: [Zope] FW: HELP !!! > > Depends on your operating system, but if it's UNIXlike, typically it's: > > download Python from > http://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz > untar and ungz it > cd to the directory that results > > run: > CFLAGS='-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' OPT="-g -O2 > $CFLAGS" ./configure --prefix=/some/directory/Python > make > make install > > Then change the Zope "start" script's "hash bang" line to point to > /some/directory/Python/bin/python. > > HTH, > > - C > > > On Thu, 2003-02-20 at 09:06, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > > First of all thanks for your help, but I have another question. > > How and where can I compile the Python. > > Sorry for the question but I am not experienced with this. > > > > Thanks for your help !!! > > > > -----Original Message----- > > From: Chris McDonough [mailto:chrism@zope.com] > > Sent: Donnerstag, 20. Februar 2003 14:52 > > To: TANNERT,CARSTEN " "(HP-Germany,ex1) > > Cc: zope(a)zope.org > > Subject: Re: [Zope] FW: HELP !!! > > > > You need to compile the Python which Zope uses to use "large files". > > http://www.python.org/doc/lib/posix-large-files.html. > > > > On Thu, 2003-02-20 at 06:56, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > > > Here is the traceback of the error_log. Thx for the try to help me !!! > > > > > > > > > > > > Traceback (innermost last): > > > > > > * Module ZPublisher.Publish, line 98, in publish > > > * Module ZPublisher.mapply, line 88, in mapply > > > * Module ZPublisher.Publish, line 39, in call_object > > > * Module Shared.DC.Scripts.Bindings, line 252, in __call__ > > > * Module Shared.DC.Scripts.Bindings, line 283, in _bindAndExec > > > * Module App.special_dtml, line 174, in _exec > > > * Module App.Undo, line 92, in undoable_transactions > > > * Module ZODB.UndoLogCompatible, line 29, in undoInfo > > > * Module ZODB.FileStorage, line 1096, in undoLog > > > > > > OverflowError: long int too large to convert > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > From: TANNERT,CARSTEN (HP-Germany,ex1) > > > Sent: Donnerstag, 20. Februar 2003 12:36 > > > To: zope(a)zope.org > > > Subject: HELP !!! > > > > > > > > > > > > We have a lot of sites and content in a Plone web. > > > > > > Now suddenly I cannot delete or rename objects in Plone and also not in > > > Zope. > > > > > > > > > > > > I always get the following message: > > > > > > > > > > > > > > > Site Error > > > > > > > > > An error was encountered while publishing this resource. > > > > > > Error Type: OverflowError > > > Error Value: long int too large to convert > > > > > > > > > > > > PLEASE can anybody help me, it's really urgent !!! > > > > > > > > > > > > THX > > > > > >

1 0

RE: [Zope] FW: HELP !!!
by Chris McDonough 20 Feb '03

20 Feb '03

Depends on your operating system, but if it's UNIXlike, typically it's: download Python from http://www.python.org/ftp/python/2.1.3/Python-2.1.3.tgz untar and ungz it cd to the directory that results run: CFLAGS='-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64' OPT="-g -O2 $CFLAGS" ./configure --prefix=/some/directory/Python make make install Then change the Zope "start" script's "hash bang" line to point to /some/directory/Python/bin/python. HTH, - C On Thu, 2003-02-20 at 09:06, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > First of all thanks for your help, but I have another question. > How and where can I compile the Python. > Sorry for the question but I am not experienced with this. > > Thanks for your help !!! > > -----Original Message----- > From: Chris McDonough [mailto:chrism@zope.com] > Sent: Donnerstag, 20. Februar 2003 14:52 > To: TANNERT,CARSTEN " "(HP-Germany,ex1) > Cc: zope(a)zope.org > Subject: Re: [Zope] FW: HELP !!! > > You need to compile the Python which Zope uses to use "large files". > http://www.python.org/doc/lib/posix-large-files.html. > > On Thu, 2003-02-20 at 06:56, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > > Here is the traceback of the error_log. Thx for the try to help me !!! > > > > > > > > Traceback (innermost last): > > > > * Module ZPublisher.Publish, line 98, in publish > > * Module ZPublisher.mapply, line 88, in mapply > > * Module ZPublisher.Publish, line 39, in call_object > > * Module Shared.DC.Scripts.Bindings, line 252, in __call__ > > * Module Shared.DC.Scripts.Bindings, line 283, in _bindAndExec > > * Module App.special_dtml, line 174, in _exec > > * Module App.Undo, line 92, in undoable_transactions > > * Module ZODB.UndoLogCompatible, line 29, in undoInfo > > * Module ZODB.FileStorage, line 1096, in undoLog > > > > OverflowError: long int too large to convert > > > > > > > > > > > > > > > > -----Original Message----- > > From: TANNERT,CARSTEN (HP-Germany,ex1) > > Sent: Donnerstag, 20. Februar 2003 12:36 > > To: zope(a)zope.org > > Subject: HELP !!! > > > > > > > > We have a lot of sites and content in a Plone web. > > > > Now suddenly I cannot delete or rename objects in Plone and also not in > > Zope. > > > > > > > > I always get the following message: > > > > > > > > > > Site Error > > > > > > An error was encountered while publishing this resource. > > > > Error Type: OverflowError > > Error Value: long int too large to convert > > > > > > > > PLEASE can anybody help me, it's really urgent !!! > > > > > > > > THX > > >

2 1

FW: [Zope] FW: HELP !!!
by TANNERT,CARSTEN (HP-Germany,ex1) 20 Feb '03

20 Feb '03

-----Original Message----- From: TANNERT,CARSTEN (HP-Germany,ex1) Sent: Donnerstag, 20. Februar 2003 15:05 To: 'Chris McDonough' Subject: RE: [Zope] FW: HELP !!! First of all thanks for your help, but I have another question. How and where can I compile the Python. Sorry for the question but I am not experienced with this. Thanks for your help !!! -----Original Message----- From: Chris McDonough [mailto:chrism@zope.com] Sent: Donnerstag, 20. Februar 2003 14:52 To: TANNERT,CARSTEN " "(HP-Germany,ex1) Cc: zope(a)zope.org Subject: Re: [Zope] FW: HELP !!! You need to compile the Python which Zope uses to use "large files". http://www.python.org/doc/lib/posix-large-files.html. On Thu, 2003-02-20 at 06:56, TANNERT,CARSTEN (HP-Germany,ex1) wrote: > Here is the traceback of the error_log. Thx for the try to help me !!! > > > > Traceback (innermost last): > > * Module ZPublisher.Publish, line 98, in publish > * Module ZPublisher.mapply, line 88, in mapply > * Module ZPublisher.Publish, line 39, in call_object > * Module Shared.DC.Scripts.Bindings, line 252, in __call__ > * Module Shared.DC.Scripts.Bindings, line 283, in _bindAndExec > * Module App.special_dtml, line 174, in _exec > * Module App.Undo, line 92, in undoable_transactions > * Module ZODB.UndoLogCompatible, line 29, in undoInfo > * Module ZODB.FileStorage, line 1096, in undoLog > > OverflowError: long int too large to convert > > > > > > > > -----Original Message----- > From: TANNERT,CARSTEN (HP-Germany,ex1) > Sent: Donnerstag, 20. Februar 2003 12:36 > To: zope(a)zope.org > Subject: HELP !!! > > > > We have a lot of sites and content in a Plone web. > > Now suddenly I cannot delete or rename objects in Plone and also not in > Zope. > > > > I always get the following message: > > > > > Site Error > > > An error was encountered while publishing this resource. > > Error Type: OverflowError > Error Value: long int too large to convert > > > > PLEASE can anybody help me, it's really urgent !!! > > > > THX >

1 0