- Zope - Zope lists

VirtualHostMonster question: URL in location bar
by Jean Jordaan 16 Sep '02

16 Sep '02

Hi all I followed the ZopeBook Virtual Hosting examples without any problem: http://www.zope.org/Documentation/Books/ZopeBook/2_6Edition/VirtualHosting.… but I'm still puzzled about one thing. The ZopeBook says: At this point, you're probably wondering just how in the world any of this helps you. You're certainly not going to ask people to use their browser to visit a URL like http://yourserver.com//VirtualHostBase/http/zope.com/vhm_test/VirtualHostRo… just so your Zope-generated URLs will be "right". So OK, Apache rewrites dev.myserver.com to 192.168.1.2/.../Virtual... and Zope generates the correct URL in the page source, BUT the URL in the browser Location bar is still the long, ugly, VHM URL. So now I'm still wondering "just how in the world any of this helps " me. How do I get the location bar to show the un-rewritten URL? Should I add a SiteRoot to my Zope folder? (I did try a SiteRoot there, but it's not kicking in, for some reason ..) -- Jean Jordaan Upfront Systems http://www.upfrontsystems.co.za

2 2

medusa question
by 3205 5361 1215 9784 16 Sep '02

16 Sep '02

Hello zope, i would like to implement IPython's shell in medusa. where should i look for? whats the loop for the medusa monitor's client which gives the python prompt? i didnt manage to find it ... only some select.select statement that is a bit mystical to me right now. :) thanks, k -- don't believe everything you think

1 0

RE: [Zope] ZClass question - array of arrays
by Chris Beaven 16 Sep '02

16 Sep '02

re-reading... ok I misread your entire post - hehe sorry! Maybe someone a bit more knowledgable can help :D -----Original Message----- From: Dianne Van Dulken [mailto:Dianne.VanDulken@team.ozemail.com.au] Sent: Monday, 16 September 2002 2:24 p.m. To: 'zope(a)zope.org' Subject: [Zope] ZClass question - array of arrays Hi, I'm having a little bit of a problem working out what ZClass property I should be setting. I want to record an array that can either contain strings or more arrays. eg: It can be ['a', 'b', 'c'] or ['a', ['b', 'c'], 'd'] or [['a','b'], ['c','d'], ['e','f']] The problem is that I can't work out what property type I should be setting this to be. I tried tokens, but tokens won't allow arrays to be saved, and both lines and strings assume that there will be a string (obviously), which means that I have to do a lot of splitting on [ and , before I can work with the data. The whole idea of the property is that if there is a scalar in position X, it shows the scalar, otherwise with an array, it shows a random value from that array. Is there an obvious type that I am missing? Thanks Dianne _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

RE: [Zope] ZClass question - array of arrays
by Chris Beaven 16 Sep '02

16 Sep '02

Check each item in the overall list like this: # in an external method if type(item)==type([]): print "it's a list" # in a Python Script if same_type(item,[]): print "it's a list" -----Original Message----- From: Dianne Van Dulken [mailto:Dianne.VanDulken@team.ozemail.com.au] Sent: Monday, 16 September 2002 2:24 p.m. To: 'zope(a)zope.org' Subject: [Zope] ZClass question - array of arrays Hi, I'm having a little bit of a problem working out what ZClass property I should be setting. I want to record an array that can either contain strings or more arrays. eg: It can be ['a', 'b', 'c'] or ['a', ['b', 'c'], 'd'] or [['a','b'], ['c','d'], ['e','f']] The problem is that I can't work out what property type I should be setting this to be. I tried tokens, but tokens won't allow arrays to be saved, and both lines and strings assume that there will be a string (obviously), which means that I have to do a lot of splitting on [ and , before I can work with the data. The whole idea of the property is that if there is a scalar in position X, it shows the scalar, otherwise with an array, it shows a random value from that array. Is there an obvious type that I am missing? Thanks Dianne _______________________________________________ Zope maillist - Zope(a)zope.org http://lists.zope.org/mailman/listinfo/zope ** No cross posts or HTML encoding! ** (Related lists - http://lists.zope.org/mailman/listinfo/zope-announce http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

Zope-2.5.1 + OpenBSD-2.8
by David Jackson 16 Sep '02

16 Sep '02

Howdy -- I am trying to install Zope-2.5.1, my OpenBSD-2.8, with Python-2.1.3, and it is failing? I did see an older post about using the a (thread) lib from OpenBSD-2.7 but I don't have 2.7? Is their another work around? TIA, David --

4 4

Using Xul
by Axel.Missbach＠t-online.de 15 Sep '02

15 Sep '02

I'am trying to use xul-files. Running it in the browser it works fine, calling an dtml-document with the contents of the xul-file it doesn't work right. The pagesource is ok. Is there a naming convention for the xul-files or something else? Axel

4 3

Document Conversion
by Derek Basch 15 Sep '02

15 Sep '02

Hello All, I just need some suggestions on where to get started with document conversion and generation. I a currently using ReportLab to output PDF documents. I would like to be able to output in other formats as well. ie....Word(stupid M$), plain text, etc.... Can anyone help me out here? Thanks, Derek Basch __________________________________________________ Do you Yahoo!? Yahoo! News - Today's headlines http://news.yahoo.com

1 0

RE: [Zope] New server recommendations
by sean.upton＠uniontrib.com 15 Sep '02

15 Sep '02

I too, really like the Appro boxes (I'm using a a variety of them, 1124S, 1124i, 1224X). Perhaps look at the Appro 1124i, 1U/DualAMD/cold-swap-ide). This box may be marketed under different names by different resellers; they are very reasonably priced for what you get. They have excellent cooling, and are well-built; they use a commodity Taiwanese Mainboard (Tyan Thunder K7) in a somewhat-proprietary-but-designed-around-that-board chassis. The nice thing about this setup is you can buy boxed Tyan mainboards as shelved-spares. The resellers of these boxes, though, are the ones who are going to provide support, so keep that in mind. Appro is essentially just a manufacturer (though you can buy direct from them). If you went the AMD route, I would strongly suggest against a DIY approach; cooling is a serious issue. Intel Xeon Prestonia boxes run very cool (we have Appro 1224X boxes, and the exhaust is not even warm). For an idea about cooling on AMD servers, Appro's 1124 AMD servers have excellent cooling, but the exhaust is decently warm; anything less than marvelous cooling would likely fry your dual AMD box. If you want to go the DIY approach, you can get all the components you would need for building a box, but I would suggest going the P4-Xeon route, and get a MB with good environment sensors drivers, and buy a case with the best cooling you can find. Bottom line: AthlonMP offers the best value proposition compared to Xeon, but make sure your cooling is done right if you go this route. We run Debian on all our boxes. With our newest setup, we plan to run multiple Zope ZEO client instances on each 2P/1U web-server box, tied to one CPU each - each bound to an IP with a dedicated 100MB 3com on-board Ethernet port that our front-end squid-cache proxy server(s) connects to. We connect on the back-end via switched Copper GB Ethernet to our 1U ZSS boxes (which have on-board Intel Pro 1000 GB port and a hardware raid card in their single PCI slot). If you are running Linux, you may want to investigate CPU affinity patches to the kernel to avoid the SMP penalty you might incur with a single Zope instance wandering across CPUs. Sean -----Original Message----- From: David Hart [mailto:dhart@atlantisblue.com.au] Sent: Sunday, September 15, 2002 12:50 AM To: zope(a)zope.org Subject: Re: [Zope] New server recommendations Hi Howard & All, I'm in a similar predicament, albeit not so urgent. I'm looking at APPRO (http://appro.com/) 1RU dual Athlon servers. (Available from Emagen (http://emagen.com.au/) for purchases in Australia). My Zope installations typically use external processes like MySQL, HTMLDOC, apache/ssl, sendmail, etc., so the second CPU is useful as overflow in crunch situations. -- David Hart Atlantis Blue Pty Ltd On Sun, 2002-09-15 at 17:22, Howard Hansen wrote: [snip] >From recent discussions, it appears that Zope doesn't benefit much from a dual processor system, but it does benefit from higher clock rates and more RAM. So should I invest in a faster single-proc system with a couple of gigs of RAM, or go with a slower dual-proc box?

1 0

Goddamn pcgi - problems with authentication... no ZSyncer or other fun tidbits
by Heimo Laukkanen 15 Sep '02

15 Sep '02

This is just a rant about how I tried to save some money and got a hosting from anon Zope hosting company - that offered cgi's and allowed me to run Zope behind apache. First of all I had terrible problems with the http basic auth, since it did not work at all. I mean not at all. I thougth I was so clever when I uploaded an old Data.fs that had cookie crumbler set so I could authenticate myself with cookies via form. Yeah. Well. Everything is sweet - expect that I can't do anything really fun. Like upload content to my site via webdav, since I have only that pcgi connection or ftp to the server - but not to the Zope itself. Then as a last thing I tried to use ZSyncer to upload content from my own machine to the hosted Zope but no. The same authentication problem bites me again. I feel like kicking myself. Saving money in hosting also ties my hands from doing advanced and fun things that I would have liked to do. Damn me. Damn Apache. Damn pcgi. ,-) If anyone has any ideas how to get over that pcgi-problem, that would be appreciated. Otherwise - remember that the Zope hosting costs a little bit more for a reason. -huima

1 0

Zope digest, Vol 1 #2347 - 21 msgs
by TGERMAINE＠UPei.CA 15 Sep '02

15 Sep '02

I am away on vacation until Sept 16. If your inquiry is urgent please resend your request to Chris Martin (cmartin(a)upei.ca) and he will look after it. Alternatively, you can call Chris at 566-0604 Tom Germaine Access Services Administrator

1 0