- Zope - Zope lists

Variable substitution of <dtml-in> Attributes
by Adam Warner 07 Nov '01

07 Nov '01

Hi all, This doesn't appear to be possible but I'm just confirming. I have this line of code: <dtml-in expr="PARENTS[0].objectValues('Folder')" sort=id> I'd like to be able to substitute the Attributes as a string. For example a dtml method called sort_order may contain the string: reverse sort=id Then I would substitute that in at runtime. It might look something like this: <dtml-in expr="PARENTS[0].objectValues('Folder')" &dtml-sort_order;> However this and similar attempts gives me a Document Template Parse Error. Thanks, Adam

5 6

Zope not restarting itself after crash
by Ron Bickers 07 Nov '01

07 Nov '01

Besides the problem that Zope crashes every once in a while (it could be days it could be many weeks) for no apparent reason, it won't restart itself. I get the following in the stupid log. It just keeps trying as fast as it can until I kill it. 2001-11-05T20:18:55 ERROR(200) zdaemon zdaemon: Mon Nov 5 15:18:55 2001: Aiieee! 32529 exited with error code: 256 ------ 2001-11-05T20:18:55 INFO(0) zdaemon zdaemon: Mon Nov 5 15:18:55 2001: Houston, we have forked ------ 2001-11-05T20:18:55 INFO(0) zdaemon zdaemon: Mon Nov 5 15:18:55 2001: Hi, I just forked off a kid: 32533 ------ 2001-11-05T20:18:55 INFO(0) zdaemon zdaemon: Mon Nov 5 15:18:55 2001: Houston, we have forked ------ 2001-11-05T20:18:55 ERROR(200) zdaemon zdaemon: Mon Nov 5 15:18:55 2001: Aiieee! 32533 exited with error code: 256 When I start Zope (2.4.2), I get warning messages about the use of deprecated modules, so I figured I'd give the following a shot. For some reason, if I change z2.py as follows, it doesn't have problems restarting itself. Coincidence or is there a good explanation? - zdaemon.run(sys.argv, os.path.join(CLIENT_HOME, Zpid)) + zdaemon.run(['-W', 'ignore'] + sys.argv, os.path.join(CLIENT_HOME, Zpid)) _______________________ Ron Bickers Logic Etc, Inc.

3 3

PersistentMapping not persistent?
by alex＠quad.com.ar 07 Nov '01

07 Nov '01

hey there, I've been trying to get around a problem in my zope 2.4.2 persistentMapping. I've built the zodb auth source of exIserFolder.. it basically uses a PersistentMapping to store all the user accounts, passwords and roles. Everything works fine, but then I noticed passwords getting reset when zope restarts (or just on a long non-activity period) I create a user, set his password and roles.. everything goes ok.. I change his password to something different.. and it works.. but then I restart zope, and his password gets resetted to the old one. now if I use a self.data={} instead of self.data=PersistentMapping() and then add a self._p_changed=1 on every method that updates the self.data everything works as expected, so here goes the question: is PersistentMapping fscked up on 2.4.2 or does it still need something similar to self._p_changed=1 to commit all the transactions back into zodb ? any hints, I could fix this by NOT using PersistentMapping, but since that's what User.py uses, I thought it was going to be a good way to do it.... please.. help :P Alex

3 4

IMAP/SMTP web interfaces for Zope
by Dragos Lipan 07 Nov '01

07 Nov '01

I intend to desing an web interface for my server IMAP/SMTP services. I use qmail-1.03, Courier IMAP on RH 7.2. Also Zope 2.4.2. Found two recommended products (even more than email interfaces, but real PIMs), a. worldpilot-release-1.1.0alpha4 b. zopegum-1.2.0-beta2 released also (in another product) as zopegud-1.0.0-preview5. Trying to install lastest version of those products, I failed, Zope don't see them in the list of intsalled products. (exception, from the whole bundle of ZopeGUD, ThreadSafeCounter was the only avaible and working). worldpilot, an older version, worldpilot.1.0.4 seems to work with zope-2.4.2, but after logging into IMAP server, sends me back to login screen (altought IMAP server reports me as logged in). I read about a patch for worldpilot1.0.4 to work with Courier IMAP, but coudn't find any help on their forum. I tried out IMAPAdapter, but either, cannot be intalled as Zope 2.4.2 product :(( Can any body help? even recommend me another product. Thanks, Dragos Lipan Piatra Craiului National Park str. Raului 27, 2223 Zarnesti, Brasov, Romania dlipan(a)pcrai.ro tel. 40-93-330477 =8-)

5 4

RE: [Zope] Problems Accessing site after reinstall
by Steven Grimes 07 Nov '01

07 Nov '01

I'm using IIS to resolve SSL and in Zope I'm using the standard acl_users. Thanks, Steven Grimes Database Engineer sgrimes(a)atinucleus.com <mailto:sgrimes@atinucleus.com> Accelerated Technology, Inc. 720 Oak Circle Drive East Mobile, AL 36609 TEL*: 251-661-5770 FAX*: 251-661-5788 www.acceleratedtechnology.com <http://www.acceleratedtechnology.com> *Please note new area code "251" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Over Ten Years of Providing Embedded Solutions ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -----Original Message----- From: Brenton Bills [mailto:bbills@bigpond.net.au] Sent: Tuesday, November 06, 2001 10:59 PM To: sgrimes(a)atinucleus.com Subject: Re: [Zope] Problems Accessing site after reinstall > I'm in the process of upgrading one of my zope servers and after I get > everything reinstalled and try to log on the only user that I can log on as > is the super user account. I made sure to install the same version and all > the same products and then I copied my data.fs into the \var directory and I > tried to access the site. I can not use any of the users I had with the old > system. > What kind of Authentication system are you using? The zope standard inbuilt one? Thanks, Brenton Bills.

2 2

Zope hiccuping
by Chris Kratz 07 Nov '01

07 Nov '01

We have been noticing that periodically, we get an error from IE that says "Cannot find server or DNS error". It is not easily reproducable (except by just clicking links on the server) and a F5 refresh in the browser [almost] always loads the page correctly. I turned on logging today with the -M startup option and observed the following entries when it happened: B 145697132 2001-11-07T17:15:38 GET /OutcomeTracker/Dev_News I 145697132 2001-11-07T17:15:38 0 A 145697132 2001-11-07T17:15:39 200 32155 E 145697132 2001-11-07T17:15:39 B 145934020 2001-11-07T17:15:40 GET /OutcomeTracker/PeopleOrganizations/index_html I 145934020 2001-11-07T17:15:40 0 B 135053764 2001-11-07T17:15:56 POST /OutcomeTracker/Activities/index_html I 135053764 2001-11-07T17:15:56 2831 B 146464388 2001-11-07T17:15:57 GET /OutcomeTracker/PeopleOrganizations/index_html I 146464388 2001-11-07T17:15:57 0 A 146464388 2001-11-07T17:16:03 200 31200 E 146464388 2001-11-07T17:16:03 Notice how the Get /OutcomeTracker/PeopleOrganizations/index_html never gets the A or E lines, but only has a B and I line. The subsequent refresh finished the request. Interestingly, the two incompleted requests are not logged to z2.log. We can see the request before and the request after, but that's it. The other strangeness is that in the postgres log, we see a "pq_recvbuf: unexpected EOF on client connection". This seemed to point to zope threads dying. Since I'm not getting anything in the logs(*see below), I started running tests with one eye on the currently running processes. And sure enough, whenever I got that error at the browser (cannot find server...), *All* of the zope threads (except the main starter thread) die quietly and come back with new PIDs. It really appears like it reruns the entire startup sequence again. With Z_DEBUG_MODE on I can watch it go through the startup sequence again whenever this happens. But, there are no tracebacks. It's just like somebody clicked restart in the middle of a process. The one glimmer of hope is in the stupid log file: 2001-11-07T19:30:23 ERROR(200) zdaemon zdaemon: Wed Nov 7 14:30:23 2001: Aiieee! 1925 exited with error code: 11 ...restarting... Here's the questions, 1. It appears that something is causing those threads to crash (or end), but nothing is getting put in the log file. Is there any way to get the tracebacks I assume are happening or to find out what is going on? 2. Alternatively, is there a way to run zope in single threaded mode? Z_DEBUG_MODE appears to only apply to the main thread because it goes ahead and spawns additional threads. If I use -t 0 I get two processes, but no response from a web browser request. If I use -t 1, I get three processes owned by nobody and the original one by root. 3. Any further ideas on how to debug this thing? Where do I find what error code 11 is? Thanks for you time and help, -Chris ------------------------------ Chris Kratz chris.kratz(a)vistashare.com

1 1

RE: [Zope] Pulling excel charts into zope/HTML
by Jeffrey Robinson 07 Nov '01

07 Nov '01

My apologies to Scott Meilicke as he will probably receive this message twice (I forgot to reply to the list as well... but I blame the tools) ---- > A few months ago I had been talking to the author of the MSWord Document > product (very cool way to HTML-ize your Word documents, but still keep the > original as just an extra link for users to request if they want). > > The author said that he was working on, or would soon be working on an > MSOffice Document product which allowed for a whole bunch of different > MS-file formats to be brought into Zope. > > I'm not certain where the project stands as of now, though. The link for > the existing product (perhaps it could be retrofitted for your purposes?) > is at http://www.zope.org/Members/eric/MSWordDocument > > Jeff > > -----Original Message----- > From: Meilicke, Scott [SMTP:scott.meilicke@intp.com] > Sent: Wednesday, November 07, 2001 12:54 PM > To: 'zope(a)zope.org' > Subject: [Zope] Pulling excel charts into zope/HTML > > Is anyone pulling excel charts into zope? > > I'm *trying* to use com and zope on NT to export a chart into a gif and > drop > it onto the file system with an external method. From there I can use > LocalFS or figure out a way to get it into the zodb for display. > > Thanks - Scott > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev )

1 0

RE: [Zope] Pulling excel charts into zope/HTML
by Meilicke, Scott 07 Nov '01

07 Nov '01

I need to do it automagically. I don't want my users to have to remember or do things too much differently than they are doing now. Believe it or not, although these are intelligent people, they had difficulties with webfolders. Scott -----Original Message----- From: Andreas Jung [mailto:andreas@zope.com] Sent: Wednesday, November 07, 2001 10:58 AM To: Meilicke, Scott; zope(a)zope.org Subject: Re: [Zope] Pulling excel charts into zope/HTML Using WebDAV and Webfolders ?! Andreas ----- Original Message ----- From: "Meilicke, Scott" <scott.meilicke(a)intp.com> To: <zope(a)zope.org> Sent: Wednesday, November 07, 2001 13:53 Subject: [Zope] Pulling excel charts into zope/HTML > Is anyone pulling excel charts into zope? > > I'm *trying* to use com and zope on NT to export a chart into a gif and drop > it onto the file system with an external method. From there I can use > LocalFS or figure out a way to get it into the zodb for display. > > Thanks - Scott > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://lists.zope.org/mailman/listinfo/zope > ** No cross posts or HTML encoding! ** > (Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev ) >

1 0

Pulling excel charts into zope/HTML
by Meilicke, Scott 07 Nov '01

07 Nov '01

Is anyone pulling excel charts into zope? I'm *trying* to use com and zope on NT to export a chart into a gif and drop it onto the file system with an external method. From there I can use LocalFS or figure out a way to get it into the zodb for display. Thanks - Scott

2 1

RE: [Zope] conditional dtml-in ?
by Ruberl Michele 07 Nov '01

07 Nov '01

If I do <dtml-if expr="my_attribute == 1"> <dtml-in> </dtml-in> </dtml-if> my_attribute isn't an attribute of each sequence_item If I do <dtml-in> <dtml-if> </dtml-if> </dtml-in> I cannot use the dtml-in modifiers, like start="1", size="10">... I mean, I can use them but I'd like them to mean "start from position 1 of the sequence of the items matching the where-like clause" and "take the first 10 elements of the sequence of the items matching the where-like clause". Am I wrong? Michele > -----Original Message----- > From: Garry Steedman [mailto:gs@styrax.com] > Sent: mercoledì 7 novembre 2001 18.28 > To: Ruberl Michele > Cc: zope(a)zope.org > Subject: Re: [Zope] conditional dtml-in ? > > > Michele, > > am i missing something, why dont you do > > <dtml-if> > <dtml-in> > </dtml-in> > </dtml-if> > > or some combination thereof??? > > cheers, > > garry > > On 7 Nov 2001, at 17:18, Ruberl Michele wrote: > > From: Ruberl Michele <mruberl(a)etnoteam.it> > To: "'zope(a)zope.org'" <zope(a)zope.org> > Subject: [Zope] conditional dtml-in ? > Date sent: Wed, 7 Nov 2001 17:18:03 +0100 > > > Hi everybody, > > > > is there a way of making <dtml-in> loops conditionally? > > > > I would need something like <dtml-in expr="objectValues('MyZClass')" > > where="my_attribute == 1"> Does anybody have a method doing > this or a > > way to help me? > > > > Thanks a lot > > > > Michele > > > > _______________________________________________ > > Zope maillist - Zope(a)zope.org > > http://lists.zope.org/mailman/listinfo/zope > > ** No cross posts or HTML encoding! ** > > (Related lists - > > http://lists.zope.org/mailman/listinfo/zope-announce > > http://lists.zope.org/mailman/listinfo/zope-dev ) > > > +-------------------------------------------+ > Garry Steedman mailto:gs@styrax.com > Styrax Associates http://www.styrax.com/ > > "The Good Man has no shape." > +-------------------------------------------+ >

4 3