- Zope - Zope lists

failed to compile on BSDI 4.0
by Tan Juay Kwang 01 Jun '99

01 Jun '99

Hi, has anybody successfully compiled zope 2.0.0a1 on a BSDI 4.0 Intel class machine? I can compile the package on a Sparc Solaris 2.6 with no problems but I got the following errors (warnings?) during the compilation process :- gcc -D_HAVE_BSDI -I../Components/ExtensionClass -g -O2 -I/usr/local/include/python1.5 -I/usr/local/include/python1.5 -DHAVE_CONFIG_H -c ./../Components/ExtensionClass/ExtensionClass.c ld ExtensionClass.o -o ExtensionClass.so ld: warning: cannot find entry symbol _start; defaulting to 08048074 After this point, I got a whole lot of undefined references. The particular ld from Solaris 2.6 is the one supplied while the ld that gives the warning prints the following with "ld -v" :- GNU ld version 2.8.1 (with BFD 2.8.1) Many thanks. Juay Kwang

1 0

RE: [Zope] ODBC and Zserver problems
by Alexander Staubo 01 Jun '99

01 Jun '99

Oh, but doesn't local InterBase block calls made from services? If you're using a fully licensed version of InterBase I can't promise with certainty that this is the cause of your problem, but if you're using a bundled version (one that comes with an Inprise Borland product) then that version will deny connection from anything running within a service, because it deems this to be a "network connection" and not a local one, and that would violate the license. Right. There may be ways around this, other than buying the full product, but I have not found it. It also affects ISAPI extensions on IIS or any other ISAPI-enabled web server such as Zeus, because these extensions are DLLs running in the context of the IIS service. -- Alexander Staubo http://www.mop.no/~alex/ "It has taken the planet Earth 4.5 billion years to discover it is 4.5 billion years old." --George Wald >-----Original Message----- >From: zope-admin(a)zope.org [mailto:zope-admin@zope.org]On Behalf Of >Graham Chiu >Sent: 1. juni 1999 02:37 >To: zope(a)zope.org >Subject: Re: [Zope] ODBC and Zserver problems > > >In article <4.2.0.56.19990531085431.00bd7f00(a)lisp.atmm.nl>, Martijn >Pieters <mj(a)antraciet.nl> writes >>What database are you connecting too? Could it be that the >security of the >>database doesn't allow the system account (the account all services >>normally start up as) to access the database? If it is an >Access database, >>make sure the database isn't opened by any other process, for >example. This >>could cause problems. > >Local Interbase 4.2.1.328. > >this is the traceback... > > ><!-- >Traceback (innermost last): > File f:\zope\lib\python\ZPublisher\Publish.py, line 255, in >publish_module > File f:\zope\lib\python\ZPublisher\Publish.py, line 157, in publish > File f:\zope\lib\python\ZPublisher\mapply.py, line 154, in mapply > (Object: manage_open_connection) > File f:\zope\lib\python\ZPublisher\Publish.py, line 98, in >call_object > (Object: manage_open_connection) > File f:\zope\lib\python\Shared\DC\ZRDB\Connection.py, line 179, in >manage_open_connection > (Object: stock) > File f:\zope\lib\python\Shared\DC\ZRDB\Connection.py, line 197, in >connect > (Object: stock) > File f:/Zope\lib\python\Products\ZODBCDA\db.py, line 154, in __init__ >BadRequest: (see above) > > > >------- >Regards, Graham Chiu >gchiu<at>compkarori.co.nz > >_______________________________________________ >Zope maillist - Zope(a)zope.org >http://www.zope.org/mailman/listinfo/zope > >(For developer-specific issues, use the companion list, >zope-dev(a)zope.org - http://www.zope.org/mailman/listinfo/zope-dev ) >

2 1

Server crashing
by Mike Pelletier 01 Jun '99

01 Jun '99

Has anyone else seen this?-- Traceback (innermost last): File "/usr/local/zope/ZopeHTTPServer/ZopeHTTPServer.py", line 418, in handle_request File "/usr/local/lib/python1.5/SocketServer.py", line 239, in process_request File "/usr/local/lib/python1.5/SocketServer.py", line 243, in finish_request File "/usr/local/lib/python1.5/SocketServer.py", line 365, in __init__ File "/usr/local/zope/ZopeHTTPServer/ZopeHTTPServer.py", line 264, in setup error: (24, 'Too many open files') Traceback (innermost last): File "/usr/local/zope/ZopeHTTPServer/ZopeHTTPServer.py", line 418, in handle_request File "/usr/local/lib/python1.5/SocketServer.py", line 239, in process_request File "/usr/local/lib/python1.5/SocketServer.py", line 243, in finish_request File "/usr/local/lib/python1.5/SocketServer.py", line 365, in __init__ File "/usr/local/zope/ZopeHTTPServer/ZopeHTTPServer.py", line 264, in setup error: (24, 'Too many open files') That's the last set of messages in my serve.log after she dies. I'm too tired to dive into it tonight, but if anyone knows what that error means it'll give me a leg up in the morning! Mike.

1 0

Re: [Zope] Zero length files after FTP put to ZServer
by Martijn Pieters 31 May '99

31 May '99

>> (Zope 2.0a with ZServer) >> >> Odd... can't seemt to transfer the body of a document to ZServer using FTP - >> the file appears but is either zero length or, if new, contains the default >> DTML script. Nothing obviously wrong in the log (Z2.log), also tried a couple >> of different FTP clients (NT and Solaris FTP) - any ideas? > > Someone reported a similar bug, I'm working on reproducing it. Strange thing > is it doesn't happen with 1.11... Perhaps I should run it through the > Amos-Bot. This is because of a change in python's FieldStorage.py between versions 1.5.1 and 1.5.2. If you use python 1.5.1 with 1.11.0pr1 like DC tells you too, and 1.5.2 with 2.0.0a1, you'll indeed notice a difference. Item 242 in the Collector: http://www.zope.org/Collector/242/view Reproducable by toggling between the old and new versions of FieldStorage.py. -- Martijn Pieters, Web Developer | Antraciet http://www.antraciet.nl | Tel: +31-35-6254545 Fax: +31-35-6254555 | mailto:mj@antraciet.nl http://www.antraciet.nl/~mj | PGP: http://wwwkeys.nl.pgp.net:11371/pks/lookup?op=get&search=0xA8A32149 ------------------------------------------

2 1

RE: [Zope] server says "document contains no data"
by Michel Pelletier 31 May '99

31 May '99

> -----Original Message----- > From: Stefan Thull [mailto:stth@topmail.de] > Sent: Monday, May 31, 1999 12:11 PM > To: zope(a)zope.org > Subject: [Zope] server says "document contains no data" > > > Hi > after long experimenting I finally succeeded in installing Zope with > Zap as webserver. :-))) > As I tried to go through the Quicktutorial I got a strange error. > > As I tried to add a new DTML Document from the main menu it > took a long > long time and finally it ended with the (netscape-)error: > Document contains no data > > The same thing happened as I tried to add an image or a document from > a file. > > Does anybody know where the problem is? > > Thank you > stefan Thull > Are you using Zope 1.10.2? If so, this shouldn't be happening. If you are using 2.0.0, I believe this bug has been fixed and you should definatly downgrade to 1.10.2, which is our latest stable release. If you are using 1.10.2, we should look into this. Can you give us some more platform details? OS? Python? Zope? -Michel PS Zap is a bit outdated, although it is known to work with 1.10.2. > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://www.zope.org/mailman/listinfo/zope > > (For developer-specific issues, use the companion list, > zope-dev(a)zope.org - http://www.zope.org/mailman/listinfo/zope-dev ) >

2 1

RE: [Zope] image resources
by Rob Page 31 May '99

31 May '99

> In article <4.1.19990529132727.0098d4b0(a)mail.atmm.nl>, Martijn Pieters > <mj(a)antraciet.nl> writes > >> Just wondering if there is a tag/variable that allows us to define > >> a url or image so that I can do this: > >> > >>  > >> > >> produces > >> > >> <a href=http://distant_url><img > >> src=http://www.distant_url.com/images/their_image.jpg width=100 > >> height=40 alt="Their picture off their server"></a> > > > >Just saying  already gets you the whole > imagetah as > >described above. You'd only have to put the A tag around it > yourself, like so: > > Doesn't seem to on my system. Zope seems to require that the image be > local. Yes, Zope wants the image to be local. Of course, you could define a Property of the top-level folder called (for example) pDistantLogo and then use <IMG SRC=""> or something. --Rob

3 5

Probs compiling ZAdabas
by Stefan Thull 31 May '99

31 May '99

Hi I'm trying to install the ZAdabas Adapter. When I run make -f Makefile.pre.in boot I get the following error-message: make -f ./Makefile.pre.in VPATH=. srcdir=. \ VERSION=$VERSION \ installdir=$installdir \ exec_installdir=$exec_installdir \ Makefile make[1]: Entering directory +`/usr/local/Zope/Zope1.10.2/ZAdabas/ZAdabasDA-1.0/lib/python/Products/ZAdabas/src' make[1]: *** No rule to make target `/usr/lib/python1.5/config/Makefile', needed by `sedscript'. Stop. make[1]: Leaving directory +`/usr/local/Zope/Zope1.10.2/ZAdabas/ZAdabasDA-1.0/lib/python/Products/ZAdabas/src' make: *** [boot] Error 2 Can anybody help me? Thank you in advance Stefan Thull

1 0

Printable Page
by Francois-Regis CHALAOUX 31 May '99

31 May '99

Hi All, I want to offer printable pages just as the Zope site does. Is there a how-to reference? FRC

1 0

Re: [Zope] Printable Page
by Kevin Dangoor 31 May '99

31 May '99

Hi, I don't think there is exactly a HOW-TO on this, but every page on the Zope site has a DTML Source link that shows you how the page works. The printable pages link is actually pretty straightforward. http://www.zope.org/dtml_source?path=/standard_html_header shows you the standard_html_header used on the Zope site. Within this method, you'll see ... So, the all the printable page link does is set the pp variable when it calls the DTML Method. Then, standard_html_header will print just the small header instead of the full header. The dtml_source method on the zope site can be a really useful tool. Kevin --- Francois-Regis CHALAOUX <fchalaou(a)strasbourg.synthelabo.fr> wrote: > Hi All, > > I want to offer printable pages just as the Zope > site > does. > > Is there a how-to reference? > > FRC > > > _______________________________________________ > Zope maillist - Zope(a)zope.org > http://www.zope.org/mailman/listinfo/zope > > (For developer-specific issues, use the companion > list, > zope-dev(a)zope.org - > http://www.zope.org/mailman/listinfo/zope-dev ) > > > _________________________________________________________ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com

1 0

server says "document contains no data"
by Stefan Thull 31 May '99

31 May '99

Hi after long experimenting I finally succeeded in installing Zope with Zap as webserver. :-))) As I tried to go through the Quicktutorial I got a strange error. As I tried to add a new DTML Document from the main menu it took a long long time and finally it ended with the (netscape-)error: Document contains no data The same thing happened as I tried to add an image or a document from a file. Does anybody know where the problem is? Thank you stefan Thull

1 0