- Zope - Zope lists

http://cmf.zope.org/
by eric.n.dunn＠bankofamerica.com 22 Jul '02

22 Jul '02

http://cmf.zope.org/ is down... anyone know when it will be up again?

2 1

How to show images in ZPT for ZMI?
by vsbabu＠vsbabu.org 22 Jul '02

22 Jul '02

Hello, This is probably a dumb question - don't know why, this should be simple, but I'm lost at the moment. I've a Py product, with management interface done in ZPT. There is some javascript and the interface needs 2-3 icons for "making it look good". Icons are GIF files in $INSTANCE_HOME/MyProduct/www . The same www folder has all the page templates too. Question: Within MyProduct/www/editForm.pt, what path should I use to show MyProduct/www/myimage.gif ? Tried myimage.gif, www/myimage.gif, Control_Panel/Products/MyProduct/myimage.gifetc. Late brainwave - Should I be somehow passing Image('www/myimage.gif')? If so, how? Thanks in advance - Babu http://vsbabu.org/

1 0

How to manage chapter-based documentation?
by Ben Chapman 22 Jul '02

22 Jul '02

Everyone: Please excuse this if it's been covered before... I want my staff to create documentation about our work procedures in structured text. My idea was that each "chapter" would be contained in a folder. I would like these documents to automagically have a table of contents, back and next links, etc., as is common in DocBook-derived web-based documentation. I know that the Zope Book authors must have put together something like this to assemble their book. Is this available anywhere or is an alternative product like this available? Many thanks in advance, Ben Chapman P.S. 90% of our law school's web-site is now Zope -- http://www.law.utulsa.edu/ Thanks again for such phenomenal software. -- Benjamin J. Chapman benjamin-chapman(a)utulsa.edu 918/631-2405 Director of Computing Resources TU College of Law http://www.utulsa.edu/law/support/ Send computing support requests to: support(a)mail.law.utulsa.edu

3 3

RE: [Zope] How to manage chapter-based documentation?
by jlagarde＠bigfoot.com 22 Jul '02

22 Jul '02

http://backtalk.sourceforge.net/ Incidentally, I have sent an email to Chris McDonough a few weeks back about a partial mod of backtalk I have done that uses ReStructuredText (http://docutils.sourceforge.net/) instead of the Zope StructuredText (which has lots of problems IMO). Chris did acknowledge my email but never got back to me, and I haven't worked on it since then either, but if someone is interested, let me know and I'll post what I did so far somewhere. Cheers, Jean Ben Chapman wrote: > I want my staff to create documentation about our work procedures in > structured text. My idea was that each "chapter" would be contained in a > folder. I would like these documents to automagically have a table of > contents, back and next links, etc., as is common in DocBook-derived > web-based documentation. > > I know that the Zope Book authors must have put together something like > this to assemble their book. Is this available anywhere or is an > alternative product like this available?

2 1

overload __getattr__ in brains-class?
by Jo Meder 22 Jul '02

22 Jul '02

Situation: I'm developing a product where some attributes come from one bunch of SQL-tables and some additional info is obtained by other means. The idea was to create a brain-class and overwrite __getattr__ to return the correct values from the different sources according to what key the application asked for. The objects are created (just like in DA.py) via objects=Results.Results(result,brain,parent,None) Now whatever I try, either some other __getattr__ seems to be called since I can get none of my "simulated" attributes to show up. Is it at all possible to do what I want to? Did I take a wrong turn somewhere way back? Any hints are appreciated. Jo. -- Internetmanufaktur Jo Meder ---------------------- Berlin, Germany http://www.meder.de/ ------------------- fon: ++49-30-417 17 63 33 Kollwitzstr. 75 ------------------------ fax: ++49-30-417 17 63 45 10435 Berlin --------------------------- mob: ++49-170- 2 98 89 97 Public GnuPG-Key ---------- http://www.meder.de/keys/jo-pubkey.txt

4 10

Use of mapply for calling ZSQL method
by Geoff Armstrong 22 Jul '02

22 Jul '02

Hi, I need to call a ZSQL method from a product and after searching the archives it seems the best solution is to make use of mapply as directed in cduncans article which deals with this in zopeLabs: http://www.zopelabs.com/cookbook/1010674274 Unfortunately, due to my lack of experience with Python, I cannot get the syntax to work and would appreciate some advise. Here's what I'm trying to do. Please don't laugh :-( def __init__(self, sql_method_name): self.id=id self.data_source_id =sql_method_name def check_db(self, val1, val2, val3): """Check database to determine if item already exists""" object = getattr(self.aq_parent, self.data_source_id) res = mapply(object, (arg1=val1,arg2=val2, arg3=val3), REQUEST, call_object,1, missing_name, dont_publish_class, REQUEST, bind=1) return len(res.dictionaries()) The ZSQL method I'm trying to call (sql_method_name) accepts 3 optional arguments, represented here by arg1, arg2, arg3 and returns true or false depending on whether an item with the values supplied can be found within the DB. I'm sure it's pretty obvious where I'm going wrong. Thanks geoff -- http://www.imagebites.net The most convenient news site on the net!

1 0

crash's when we ftp in.
by Dan Jacobs 22 Jul '02

22 Jul '02

Hi, I am running Zope 2.5.1 on Slackware 8. Whenever a user ftp's into the zope ftp server (running on port 8021) zope dies. Any ideas? Thanks - Dan Jacobs

2 1

m$ word question
by Greg Conway 22 Jul '02

22 Jul '02

Hi all, Is it possible to run M$ Word from within Zope? I've done a bit of searching but found suprisingly little, I would have thought this was something lots of people wanted to do? Anyway, what I want to do exactly is call Word with a stream of data, to perform a Mail Merge. I'm converting some script that already runs in Visual Basic, is it possible to get a Visual Basic script plug-in for Zope? Sorry if that sounds a little crazy, I'm still learning! Many thanks for any help. Regards, Greg Conway. This electronic transmission and any files attached to it are strictly confidential and intended solely for the addressee. If you are not the intended addressee, you must not disclose, copy or take any action in reliance of this transmission. If you have received this transmission in error, please notify us by return and delete the same. Further enquiries/returns can be posted to postmaster(a)gmlnt.com Thank you.

5 4

NT, 4suite and Zope
by Pascal Samuzeau 22 Jul '02

22 Jul '02

Hi, I've a NT server. In intend to serve XML files, with my Zope's site, I've installed 4suite. Or, with NT, I have no choice to install 4suite than under C:\4suite. But in any case under the Zope's lib/Product. The matter is that I want to use of XSLTranslatedDocument, and this one is waiting for the Ft.XML.Xslt, under lib/Products. How is the right way to use of 4suite with Zope under NT ? Sincerily PS -------------------------------------------------- Oreka ! Nous sommes l'internet moins cher ! Surfez 25% moins cher avec http://www.oreka.com

2 1

RE: [Zope] Heeeeeeeeeeeeelp (login problem)
by Breuer, Yvon 22 Jul '02

22 Jul '02

Hi again, Charlie asked me several questions (thanx for trying to help!) wich I'll answer below: By the way: Because I have a Dutch windows version, some of the output is in Dutch, but I don't think it will be a big problem because these outputs are always in a standard layout. ----------------------------------------------------------- Computer turned on? Yep, looks like it. ;-)) ----------------------------------------------------------- Ms Internet Explorer version? I've upgraded from 4.0 (not 4.5) to 6.0. ----------------------------------------------------------- Windows version? C:\>ver Windows 98 [Versie 4.10.1998] (That is: Second Edition) ----------------------------------------------------------- Output of: ping 127.0.0.1 C:\>ping 127.0.0.1 Pingen naar 127.0.0.1 met 32 byte gegevens: Antwoord van 127.0.0.1: bytes=32 time<10ms TTL=128 Antwoord van 127.0.0.1: bytes=32 time<10ms TTL=128 Antwoord van 127.0.0.1: bytes=32 time<10ms TTL=128 Antwoord van 127.0.0.1: bytes=32 time<10ms TTL=128 Pingstatistieken voor 127.0.0.1: Packets: verzonden = 4, ontvangen = 4, kwijtgeraakt = 0 (0% verlies), Retourtijd bij benadering in milliseconden: Minimum = 0ms, Maximum = 0ms, Gemiddeld = 0ms ----------------------------------------------------------- TCP stack installed? Huh? Guess not... (How can I check this?) ----------------------------------------------------------- Output of: ipconfig /all? C:\>ipconfig /All Windows 98 IP-Configuratie Opdrachtregelopties: /All - Gedetailleerde informatie weergeven. /Batch [file] - Naar bestand schrijven of ./WINIPCFG.OUT /renew_all - Alle adapters vernieuwen. /release_all - Alle adapters vrijgeven. /renew N - Adapter vernieuwen N. /release N - Adapter vrijgeven N. (That's all output! Therefore I tried the same command without options (see following).) ----------------------------------------------------------- Output of: ipconfig C:\>ipconfig Windows 98 IP configuratie 0 Ethernet adapter : IP-adres . . . . . . . . . . . : 169.254.183.194 Subnetmasker . . . . . . . . . : 255.255.0.0 Standaardgateway . . . . . . . : 1 Ethernet adapter : IP-adres . . . . . . . . . . . : 0.0.0.0 Subnetmasker . . . . . . . . . : 0.0.0.0 Standaardgateway . . . . . . . : ----------------------------------------------------------- Output of: netstat -n -a C:\>netstat -n -a Actieve verbindingen (= Active connections) Proto Lokaal adres Extern adres Status TCP 127.0.0.1:1030 0.0.0.0:0 LISTENING TCP 169.254.183.194:137 0.0.0.0:0 LISTENING TCP 169.254.183.194:138 0.0.0.0:0 LISTENING TCP 169.254.183.194:139 0.0.0.0:0 LISTENING UDP 127.0.0.1:1030 *:* UDP 169.254.183.194:137 *:* UDP 169.254.183.194:138 *:* ----------------------------------------------------------- Telnet to Zope possible? C:\>telnet 127.0.0.1 8080 Result: Cannot connect to 127.0.0.1 ----------------------------------------------------------- Proxy system installed? Yes, to dail-in to my ISP a proxy is used. I.E. Menu: Extra - Internet options - Connections Never choose a connection I.E. Menu: Extra - Internet options - Connections - Settings Use proxy-server for this connection: On Proxy-server --> proxy.hetnet.nl Port --> 8080 Do NOT use proxy-server for local addresses --> On ----------------------------------------------------------- The way I see it, allthough I've got myself a NIC it still doesn't work, because my network settings are not ok. But I don't know how to make them correct. You see, I know how to program (at least I think I do...) but I'm not into networking stuff (as you already found out :-) ). Hopefully this can contribute to solving my problem!!! Best regards, Yvon Breuer -----Original Message----- From: Charlie Reiman [ <mailto:creiman@kefta.com> mailto:creiman@kefta.com] Sent: Donnerstag, 18. Juli 2002 19:34 To: Breuer, Yvon; zope(a)zope.org Cc: tpassin(a)mitretek.org; renfro(a)tntech.edu; plasser(a)hexagon.at; douwe(a)oberon.nl Subject: RE: [Zope] Heeeeeeeeeeeeelp (login problem) More suggestions & questions: * Do you have some sort of proxy system installed? * can you telnet to zope? "telnet 127.0.0.1 8080" * what's the output from "netstat -n -a"? * what's the output from "ipconfig /all"? * can you ping yourself? "ping 127.0.0.1" * is the TCP stack installed? * is the computer plugged in and turned on? :-) Now that I wrote those out, you probably should try them in reverse order... It sounds like you have basic networking issues. Unfortunately, you've got them under '98 which means most of us will wince and tell you to upgrade to NT/2000/XP/Linux, which I know you probably don't want to hear. To be honest, I'm not even sure if netstat and ipconfig are available under '98. I wish I could be more help. Of course, I wish Microsoft never reased '98, too. -----Original Message----- From: zope-admin(a)zope.org [ <mailto:zope-admin@zope.org> mailto:zope-admin@zope.org]On Behalf Of Breuer, Yvon Sent: Thursday, July 18, 2002 1:10 AM To: zope(a)zope.org Cc: tpassin(a)mitretek.org; renfro(a)tntech.edu; plasser(a)hexagon.at; douwe(a)oberon.nl Subject: RE: [Zope] Heeeeeeeeeeeeelp (login problem) Hi again, First of all I'd like to thank those who've been trying to help me. Unfortunately it hasn't been successfull so far. So, here's an update on the current status. Maybe you'll find more info to help me out. :-) When I wrote my first mail (see below) this was how START.BAT looked like: Trying offline with no NIC installed, see attachment: no_nic_offline.txt Trying online with no NIC installed, see attachtment: no_nic_online.txt And my hosts.sam file looked like this (still does), see attachment: hosts.txt After your tips I tried several but --as you already understood-- without success. So, I got myself a NIC and installed it. It was recognized by Win98 and drivers were installed. Now I tried to login offline again but unluckily again without success. This is how START.BAT looked like: with_nic_offline.txt Other settings etc.: Windows 98 SE Computername: POPEYE Browser: Ms Internet Explorer 4.5 Zope version: 2.5.1 Zope superuser: StJohnHospital NB: Everytime I tried to login, I used all of the following addresses: <http://localhost:8080/manage> http://localhost:8080/manage <http://popeye:8080/manage> http://popeye:8080/manage <http://127.0.0.1:8080/manage> http://127.0.0.1:8080/manage <http://StJohnHospital:8080/manage> http://StJohnHospital:8080/manage Hopefully this leads to solving my problem! Many thanks! Yvon Breuer -----Original Message----- From: Breuer, Yvon Sent: Dienstag, 16. Juli 2002 10:30 To: zope(a)zope.org Subject: [Zope] Heeeeeeeeeeeeelp (login problem) Hi Zope-wizards, As you can see in my subject: I'm getting quite frustrated by some stupid error when I'm trying to login to my Zope server. (Yep, I'm a newbie...) Situation I'm going to create a website to gather funds for a hospital in Ghana (St. John of God Hospital in Duayaw Nkwanta). To get an idea about the situation: <http://www.zwo.nhl.nl/hbov/buitenlandstage/ghana.html> http://www.zwo.nhl.nl/hbov/buitenlandstage/ghana.html (Dutch & English). Website I want to do this with Zope & Python. I want people to be able to do online donations, retrieve information about the project, maybe send a mailinglist to keep them up to date and there are many more plans. So: I've got a lot to learn... Learn & develop @ work & @ home In order to learn as quickly as possible I tried to install Zope at work and at home (of course during my break ;-) ). At work (Win2000 Prof.), everything functions OK. I've done the tutorial and I'm now working myself through the ZopeBook. So far so good, but... My problem At home I've installed Zope (2.5.1) on my computer (Win98). No errors occured during installation. So, just like at work I tried to login to Zope for the first time, but... When I start the START.BAT, my computer starts a dial-in to my internetprovider! It seems this occurs when START.BAT is trying to retrieve my hostname. When START.BAT is finished, I type in... <http://127.0.0.1:8080/manage> http://127.0.0.1:8080/manage (START.BAT comes up with 127.0.0.1 as localhost and 8080 as port) <http://popeye:8080/manage> http://popeye:8080/manage or <http://popeye:8021/manage> http://popeye:8021/manage (popeye is the computername in my Win98 network-settings and START.BAT comes up with popeye as localhost for port 8021) <http://localhost:8080/manage> http://localhost:8080/manage (should always work, right? Not!) <http://stjohnhospital:8080/manage> http://stjohnhospital:8080/manage (stjohnhospital is the superuser I installed Zope with) ... but none of them works!!! All that happens is that my browser (MsIE) when I'm offline shows me that the page cannot be found and when I'm online it shows me either "server error" or "page not found". >:-(( NB: It doesn't matter wether I login to my internprovider or not. I'm quite sure it's nonesense to be online in order to login to a local Zope-server, but hey, I've tried everything possible (as far as I know). I also tried to un- and reinstall Zope, but that didn't work either. :-( So please, help me out here!!! (In a short while I've got some days off and I want to do some work for the website at home.) Not only me, but also the people we're trying to help will be very gratefull! ;-)) Best regards, Yvon Breuer

2 1