- Zope - Zope lists

RE: [Zope] CoreSessionTracking-based LoginMethod for LoginManager
by Andy Gimblett 15 Aug '01

15 Aug '01

> Sure. Release early, release often! Definitely! But I'm guessing "release broken" doesn't fit into this scheme. :-) -Andy -- Andy Gimblett - Programmer - Frontier Internet Services Limited Tel: 029 20 820 044 Fax: 029 20 820 035 http://www.frontier.net.uk/ Statements made are at all times subject to Frontier's Terms and Conditions of Business, which are available upon request.

2 1

Undo Again
by Phil Harris 15 Aug '01

15 Aug '01

Hi all, I'm using a few methods of my own design to add objects to the ZODB. I then want to use the undo stuff in Zope to, well, undo ;). I'm using this code (kndly suggested by Chris Withers): t=get_transaction() t.begin() self.manage_addFolder(id=objID,title=objTitle) t.note('Added Folder %s' % objID) t.commit() OK so far, it indeed adds the folder and adds a note to the undo list. Now my problem is that the note is added at the root level and never shows up in the local undo list of the parent folder of the new folder (if that makes any sense at all). My question is, how would I get it to show in the 'local' undo list of the parent folder. Any suggestions? tia Phil phil.harris(a)zope.co.uk

3 2

Re: [Zope] Zope behind a firewall.
by H.de.Wit＠SFK.NL 15 Aug '01

15 Aug '01

What do I have to do to make Zope behave with the same speed using the firewall ?? "C:\Program\WebSite\bin\python.exe" "C:\Program\WebSite\z2.py" -D -f - -p - -w80 "$@" %1 %2 %3 %4 %5 %6 %7 %8 %9 I don't have an explanation for the behaviour with the firewall, but your start.bat has the -D debug option turned on. If you turn it off, it should be really faster than it is now. Probably you noticed it, but if you are caring for speed... Hans de Wit Stichting Farmaceutische Kengetallen Postbus 30460 2500 GL DEN HAAG Tel. 070-3737448 Fax 070-3737445

1 0

Zope behind a firewall.
by Rubinstein Fredrik 15 Aug '01

15 Aug '01

Hi there, I have developed a Zope application wich when it is run in our internal net behaves like a dream. It also runs like a dream on the outside ( on the internet ). However when the Zope application is run behind our firewall ( Borderware 6.1.1 ) it is very,very slow. I'm running Zope on a NT box and have done the following in the start.bat file. And running Zope 2.3.0. "C:\Program\WebSite\bin\python.exe" "C:\Program\WebSite\z2.py" -D -f - -p - -w80 "$@" %1 %2 %3 %4 %5 %6 %7 %8 %9 What do I have to do to make Zope behave with the same speed using the firewall ?? With kind regards Fred Rubinstein

2 1

RE: [Zope] property:date
by Max Møller Rasmussen 15 Aug '01

15 Aug '01

In my experience users tend to like seperate input fields like: Day: <input type=="text" name="day"> / Month: <input type=="text" name="month"> / Year: <input type=="text" name="year"> Then you can assemble it again in the "action" script like: <dtml-call "REQUEST.set('dateString', day+month+year)"> <dtml-call "REQUEST.set('date', DateTime(dateString))"> regards Max M > From: Giuseppe Bonelli [mailto:g.bonelli@pn.itnet.it] > I want to use a date property to store a user entered date > into a ZClass property; the date must be entered in > "%d/%m/%&y" format (I am from Europe (-;)).

1 0

RE: [Zope] Hallelujah!
by Max Møller Rasmussen 15 Aug '01

15 Aug '01

Yehaw ... > > + - default for 'orphan' attribute of <dtml-in> is > now 0 instead 3. > There was much rejoicing :-) Indeed! Max M

1 0

Re: [Zope] Popy Problems
by jyd0vu001＠sneakemail.com 15 Aug '01

15 Aug '01

Russell, download the following tarball. Unzip/tar, read the README or INSTALL for the python command used to install it (it doesn't use configure;make method - instead it's something like python install.py ..). http://www.lemburg.com/files/python/eGenix-mx-Extensions.html#Download-mxBA… Once that's done, you'll have mxDateTime.h in two places... in the source you just untarred and in the /usr/local hierarchy. Mine is at: /usr/local/lib/python2.1/site-packages/mx/DateTime/mxDateTime/mxDateTime.h To double check that it's there, type the following: cd /usr/local/lib find ./ -name mxDateTime.h -print Once that is done, you should be able to build PoPy (assuming Python's paths aren't entirely messed up). With PoPy built, you may run into problems with Zope finding the shared library for mxDateTime. A workaround is to copy (or possibly link): cp /usr/local/lib/python2.1/site-packages/mx/DateTime/mxDateTime/mxDateTime.so \ /usr/local/lib/python2.1/site-packages hth, Paul. -----Original Message----- From: Russell Hires rhires(a)earthlink.net [softsign/zope-mailing-list] [mailto:ticket_ab753c61mm861s6997792391222@sneakemail.com] Sent: August 14, 2001 06:25 To: horbal(a)enel.ucalgary.ca Subject: Re: [Zope] Popy Problems Hmmm...maybe more details are in order: I've got a PowerPC running Debian-woody. I don't have a clue what egenix is, and I can't seem to find a Debian package for it, either. A find / -name egenix turns up nothing. Neither does a "locate". I looked in the debian archive, and it ain't there that I can tell. So, what's egenix, and where can I get that? Part II: bak (kedai) says: > this is where i got mxDateTime.h on my system. > egenix-mx-base-2.0.1/mx/DateTime/mxDateTime/ > this is a standard mx tar ball Since I don't have this, I can't get the mxDateTime.h file. Neither can I seem to locate the "standard mx tar ball". I do have the mx/DateTime/mxDateTime stuff, and move the .so to the different place that was mentioned, but no dice. Thanks for the help so far. Russell On Tuesday 14 August 2001 01:46, wrote: > Whoops! I'm getting ahead of myself! > > After you solve the .h problem, you'll probably run into the problem for > which I gave you a solution... =) > > At any rate, try installing the egenix 2.0.2 package into its default > place... My mxDateTime.h is located in: > > /usr/local/lib/python2.1/site-packages/mx/DateTime/mxDateTime/mxDateTime.h > > > > -----Original Message----- > From: Russell Hires rhires(a)earthlink.net XXXXXXXXXXXXXXXXXXXXXXXXXXXX > [mailto:XXXXXXXXXXXXXXXXXXXXXXXXX] > Sent: August 13, 2001 22:03 > To: XXXXXXXXXXXXXXXXXXXXXXX > Subject: Re: [Zope] Popy Problems > > > Well, no luck with egenix. It seems that the only mxDateTime.h I was able > to find was included with PoPy-2.0.1, which I'm trying to avoid. Any more > clues on this? > > Russell > > On Monday 13 August 2001 23:14, bak (kedai) wrote: > > On Tuesday 14 August 2001 10:46, Russell Hires wrote: > > > I'm trying, and not succeeding, to compile PoPy-2.0.6 and it won't > > > compile (or configure, really) without mxDateTime headers...I've got > > > the python-mxDateTime package, but not the headers...I don't get that. > > > > > > Can anyone help me? The exact error message is: > > > checking for mxDateTime.h... no > > > configure: error: PoPy needs mxDateTime headers > > > > i got the same error msg initially when trying to compile psycopg. i > > guess > > > ./configure should have --with-mxDateTime=, so put the path to it. if > > you grabbed egenix, it should be in the package. cant remember off the > > top of my head. > > > > do a find. > > hth > > > > > Thanks! > > > > > > Russell > > >

2 1

ZPT: How do I see if something is in a sequence?
by alan runyan 15 Aug '01

15 Aug '01

I am new to pagetemplates, and have to admit -- I have banged my head until its blue. I am very tired, and I need help. I have a sequence , hl_roles=['can', 'have', 'different', 'strings'], its also a attribute hanging off a object called member. I am trying to test to see if a string is in the hl_roles sequence. how do I do this? in DTML its *straight forward* <dtml-if "'different' in member.hl_roles"> I've tried tal:condition="python:'different' in member.hl_roles" and tal:condition="exists:'different' in member.hl_roles neither work. please help ~runyaga

3 3

Server Side Questions
by mixo 15 Aug '01

15 Aug '01

Is it possible to execute a cgi script (possibly not python) within a dtml document? Are server side includes possible? And can a web server (say apache) be configured to procces Zope objects as if they are some other type of document that can or should be proccess by the server before being sent to a browser? Mixo

5 7

Re: [Zope] <dtml-var xxx> in a python script
by Evan Simpson 15 Aug '01

15 Aug '01

> > How can I get the equivalent of <dtml-var xxx> in a python script, using > > acquisition. > > context.xxx or context.xxx(), depending on xxx. The problem with trying to translate DTML to Python is that <dtml-var xxx> incorporates a lot of magical behaviour. Apart from rendering the object (calling it if it is callable), as implied by the ()-or-no-() above, the name 'xxx' could be found in many places. Here's a sampling of ways to access an object 'xxx' in a Script: 1. From the target of the Script, or its context: context.xxx getattr(context, 'xxx') 2. From the Script's container, regardless of context: container.xxx getattr(container, 'xxx') 3. From a submitted form, cookies, URL query, or REQUEST.set() call: context.REQUEST['xxx'] context.REQUEST.form['xxx'] context.REQUEST.cookies['xxx'] context.REQUEST.other['xxx'] Cheers, Evan @ Zope

1 0