- Zope - Zope lists

Connection string for Z MySQL adapter?
by Ignacio Valdes 09 Feb '01

09 Feb '01

Hello all, I've added a Z MySQL adapter and it asks for a 'Database Connection String' Can't figure out what it wants from the release notes page for the product. Does anyone know what goes in this field? My database name is lmnlib and has been created on the server. -- IV

2 1

Re: [Zope] alternative storage managers ?
by Ben Edwards 09 Feb '01

09 Feb '01

Not sure if this helps but it sounds to me like you may want to look at storing the data in a rdbms. MySQL, ProgresSQL and Interbase are the free ones (not entily sure if this is true for interbase). I know oracle could do this (but of course it is expensive). Also the platform you are using is probably important for this type of stuff (i.e. go for unix). >Hi, > >I would like to store several huge data-objects (10Mb and more) in the >ZODB by use of ZOPE (Zope-2.3.0b1), but in my first tries I discovered, >that the access to folders that include several huge objects becomes very slow. >I already tested the BerkeleyDB as an alternative --- it helped a little >bit, but I had problems to get rid of unreferenzed objects by packing the >BerkeleyDB; only the referenzes were deleted, but not the >corresponding data in the BerkeleyDB. > >Does anybody know, if there are other alternative storage managers >available? In the "ZODB How-To" relational storage managers are mentioned, >but it's also mentioned that they are still experimental. >For example is it possible to use the mySQL-DB and if so, where can I find >infos about that stuff? > >Or is it necessary to store these objects externally as pickle-objects and >store only a referenz to them in the ZODB ? > >best regards, >Christoph > > > > >_______________________________________________ >Zope maillist - Zope(a)zope.org >http://lists.zope.org/mailman/listinfo/zope >** No cross posts or HTML encoding! ** >(Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev ) > >

3 2

HELP! I Can't Add Users!!!
by Ben Ocean 09 Feb '01

09 Feb '01

I have re-installed Zope *several* times all with the same result. Is there some way I can add users in UNIX, some way to hack it? PLEASE help, somebody. BenO At 06:44 PM 2/9/2001 +0300, you wrote: >On Fri, 9 Feb 2001, Ben Ocean wrote: > > I just re-installed Zope. I can add users and all *appears* to be in order. > > But when I go to log in as said users I CANNOT. Sometimes I can log in as a > > user other than superuser but *only* if that user has manage capabilities: > > not owner. What on earth is going on? > > Very strange. On fresh install all must goes well... > >Oleg. >---- > Oleg Broytmann http://phd.pp.ru/ phd(a)phd.pp.ru > Programmers don't die, they just GOSUB without RETURN.

1 0

Zope memory usage out of control
by Navindra Umanee 09 Feb '01

09 Feb '01

Hi! First of all let me just say what a wonderful system Zope is. We've been running dot.kde.org on a Squishdot/Zope setup very successfully for a quite a while now. Unfortunately, the admin of the server is getting a bit edgy about the increasing memory usage of Zope and is pressing for action. From the very start we've had to restart Zope daily (with a cron job) because Zope would be using large amounts of memory after several hours. After 15 hours of uptime this is the current situation as reported by top: PID USER PRI NI SIZE RSS SHARE STAT LIB %CPU %MEM TIME COMMAND 12093 zope 0 0 94988 90M 796 S 0 0.7 11.9 9:01 python 12122 zope 0 0 94988 90M 796 S 0 0.0 11.9 0:03 python 12123 zope 0 0 94988 90M 796 S 0 0.3 11.9 32:56 python 12124 zope 4 0 94988 90M 796 S 0 15.4 11.9 33:06 python 12125 zope 0 0 94988 90M 796 S 0 0.0 11.9 33:10 python 12126 zope 0 0 94988 90M 796 S 0 0.0 11.9 36:52 python Please tell me that's really a single process with several threads all sharing memory? :-) dot.kde.org is certainly a very busy site, is this the kind of memory usage to be expected from Zope? Has anyone seen this kind of problem before? We're using Zope 2.2.1 with the hotfixes on a Red Hat Linux box. Any hints short of switching to another news system appreciated (the SlashCode guys have been on our case). ;) Thanks, Navin. PS I'm not sure if my confirmation of subscription worked or not, please Cc: navindra(a)cs.mcgill.ca meanwhile, otherwise I'll just check the archives.

9 14

Gettin gZMySQLDA to work on win98
by Eric Casteleijn 09 Feb '01

09 Feb '01

I'm an experienced programmer just starting with zope, running into big trouble getting Zope an MySQL to work on my win98 test-/dev-box. I think the mySQL install is fine, since i tested it with the client that came with it. The Zope install works fine too (i tried both 2.2.5 and 2.3.0). After installing the ZMySQLDA Product, (following the necessary steps for winxx closely.), my Zope-process crashes with a windows-error when i: 1) try to add a database connection 2) try to open a database connection 3) try a test query on a database connection 4) sometimes even when i try to visit the man. screen in my browser. It may have to do with using an incorrect connection string (i'm new to MySQL too), but am i wrong in thinking that even that should not cause win-errors? Also is it me or are the winxx installation how-tos and readmes all telling me different things? (Esp. regarding where to put the .dll and the .pyd)? Any help would be greatly appreciated, as i feel quite low on zope-zen at this point. eric P.S. I already put this question to zopezen.org. Someone there suggested i mail it to this list. ---------------------- eric casteleijn eric(a)codenamefuture.nl t 070 302 47 81 f 070 364 49 34 Codename Future Zeestraat 71 2518 AA Den Haag ----------------------

1 0

Re: [Zope] Can't Add Users!
by Ben Ocean 09 Feb '01

09 Feb '01

I just re-installed Zope. I can add users and all *appears* to be in order. But when I go to log in as said users I CANNOT. Sometimes I can log in as a user other than superuser but *only* if that user has manage capabilities: not owner. What on earth is going on? BenO At 12:16 PM 2/9/2001 +0300, you wrote: >On Fri, 9 Feb 2001, Ben Ocean wrote: > > BINGO! I try to create users in superuser AND_I_CANNOT!!! WAZZUP??? > > Which way exactly you cannot? > >Oleg. >---- > Oleg Broytmann http://phd.pp.ru/ phd(a)phd.pp.ru > Programmers don't die, they just GOSUB without RETURN.

1 0

The HOW-TO "Build a Searchable Job Board"
by Rubinstein Fredrik 09 Feb '01

09 Feb '01

Hi there. I'm trying out the aboved named how-to. However the following piece of code <dtml-call "REQUEST.set('ts', ZopeTime())"> <dtml-call "REQUEST.set('id',_.str(_.int(ts)))"> <dtml-with "Dokument_skapa.createInObjectManager(REQUEST['id'], REQUEST)"> <dtml-call "propertysheets.dokument_info.manage_editProperties(REQUEST)"> <dtml-call reindex_object> </dtml-with> Generates the following error message Zope Error Zope has encountered an error while publishing this resource. Error Type: AttributeError Error Value: _setId Has anybody out there encountered this error and what on earth do one do about it. With kind regards. Fred R.

1 0

reading mail with attachment with eudora
by aZaZel 09 Feb '01

09 Feb '01

Hi, I'm using a dtml method to send a mail with an attachment, it works fine until i use Eudora (mac version) as mailreader....strange problem, Eudora does not recognize well the attachment as the Netscape communicator or VM do. This is the method i use now to send the message: <dtml-var standard_html_header> <dtml-sendmail smtphost="localhost"> To: pippo(a)pippo.it From: Pippo Web Site <jhp(a)pippo.it> Subject: Someone completed the join us form <dtml-mime type=text/plain encode=7bit> Informations: Name/Surname: <dtml-var name> Date of birth: <dtml-var dofb> ( dd/mm/yyyy) Address: <dtml-var address> City: <dtml-var city> E-mail: <dtml-var emailaddress> He/She is applying for: <dtml-var action> <dtml-boundary type_expr="cv.headers['Content-Type']" disposition="inline" encode="base64" filename_expr="cv.filename" skip_expr="cv.filename == ''"> <dtml-var "cv.read()"></dtml-mime> </dtml-sendmail> ..... ....... I've tried also with encoding = "uuencode" and disposition = "attachment" This is the file's header of the mail produced by that method ...... .... Subject: Someone completed the join us form Content-Type: multipart/mixed; boundary="216.103.250.202.33.472.981725980.091.23878" --216.103.250.202.33.472.981725980.091.23878 Content-Type: text/plain Content-Transfer-Encoding: 7bit Informations: Name/Surname: Prova Date of birth: oiip ( dd/mm/yyyy) Address: poip City: poip E-mail: poip He/She is applying for: Trainee --216.103.250.202.33.472.981725980.091.23878 Content-Type: image/jpeg; Content-Disposition: inline; filename="azazel.jpg" Content-Transfer-Encoding: base64 ..... ..... Next an header of a mail with the same file as attachment sent with Mozilla: ....... ...... Subject: PROVA Content-Type: multipart/mixed; boundary="------------040707070001010108070700" This is a multi-part message in MIME format. --------------040707070001010108070700 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit udioueoiu --------------040707070001010108070700 Content-Type: image/jpeg; name="azazel.jpg" Content-Transfer-Encoding: base64 Content-Disposition: inline; filename="azazel.jpg" ....... ...... Any idea where the problem can be? thanks in advance Alberto Berti P.S. The installed Zope version is 2.2.0

2 2

something is wrong
by ethan fremen 09 Feb '01

09 Feb '01

Zopatistas, Zope.org will be in readonly mode for a while. Back in a bit, ~ethan

1 0

Re: [Zope-dev] Getting parent within ZClass hierarchy
by Jim Washington 09 Feb '01

09 Feb '01

Hi, Arno I have done something similar to this: parent_id = container.aq_parent.getId() parent_title = container.aq_parent.title I think aq_inner used to be part of this solution, but it does not seem to be available any more. -- Jim Washington Arno Gross wrote: > > Easy question, but I couldn't find the answer. > How can I access the id (or title) of the parent > containing my current object? > > E.g. > > NewsContainer > |---NewsCategory ( ZClass - ObjectManager) > |---NewsItem (ZClass - CatalogAware) > > I'm looking for a method (Python script) in NewsItem, which give me the id or > title of its parent.

1 0