- Zope - Zope lists

Listing objects in a specifik folder
by Gitte Wange 18 Apr '01

18 Apr '01

Hello, I am working on a site and I need to list all documents in a specifik folder. There is just one problem - the folder isn't in the REQUEST. Now it is a subfolder to my "mainfolder". It is called About. If I say <dtml-if /mainfolder/About> <dtml-in /mainfolder/About> it never shows up. If I let out the <dtml-if> tag I get a key error ... Anything I have misunderstood ? Regards, -- ************************ Gitte Wange Jensen System Squid Developer MMManager Aps +45 29 72 79 72 gitte(a)mmmanager.org ************************

2 1

RE: [Zope] Continuing Woe with Win98 (but Zope V1.10.3 works!)
by Capesius, Alan 18 Apr '01

18 Apr '01

are you running any kind of proxy or gateway software on the box? 8080 is a common port for proxies. FrontPage PWS also uses port 8080. >>>-----Original Message----- >>>From: Paul Browning [mailto:paul.browning@bristol.ac.uk] >>>Sent: Tuesday, April 17, 2001 4:32 PM >>>To: zope(a)zope.org >>>Subject: [Zope] Continuing Woe with Win98 (but Zope V1.10.3 works!) >>> >>> >>> >>>A while back I reported a problem with Zope under Win98. The >>>symptoms are that everything looks OK in the MS-DOS command >>>window but that when you try and browse to http://localhost:8080 >>>then nothing happens. >>> >>>A number of people made useful suggestions including making sure >>>the was an entry in the Windoze LMHOSTS file but to no avail. >>> >>>As Zope did _once_ work on this particular PC I went back to >>>Zope 2.1.6 as I had a hunch that this was version I had originally >>>tried (the problems on started when I upgraded to a later version). >>> >>>However, no luck. >>> >>>Then, just for the hell of it, I installed Zope 1.10.3. IT WORKS >>>(over port 9673)! >>> >>>Zope V1 isn't alot of use to me, but I thought I'd report >>>my findings in case it causes any flashes of deduction >>>amongst Windows >>>gurus out there which might lead to a resolution of the problem. >>> >>>For the record, the M$ Personal Web Server (or whatever it's called), >>>works just fine - browsing to http://localhost does what you'd >>>expect. >>> >>>Cheers. >>> >>>Paul >>> >>>-- >>> The Library, Tyndall Avenue, Univ. of Bristol, Bristol, BS8 1TJ, UK >>> E-mail: paul.browning(a)bristol.ac.uk URL: http://www.bris.ac.uk/ >>> >>> >>>_______________________________________________ >>>Zope maillist - Zope(a)zope.org >>>http://lists.zope.org/mailman/listinfo/zope >>>** No cross posts or HTML encoding! ** >>>(Related lists - >>> http://lists.zope.org/mailman/listinfo/zope-announce >>> http://lists.zope.org/mailman/listinfo/zope-dev ) >>>

2 1

How to iterate over lists within properties?
by Ausum 18 Apr '01

18 Apr '01

I have documents that need to store a list of values within one or more of its properties, and then be able to retrieve those values through a dtml-in procedure. The lines property type is the right choice to store this list, but I haven't found how to append values to it nor how to iterate those values. About the latest, and after tried it, it looks like objectItems() nor objectValues() will work. Anyway, this is what I thought it would do the job, but it didn't: <dtml-with "dtml_document.line_property_id"> <dtml-in objectValues()> <dtml-var sequence-item><br> </dtml-in> </dtml-with> Am I missing something? Is there a workaround other than using folders instead of documents? Thanks in advance, Ausum

2 1

CatalogAware when there's no 'Catalog'
by Timothy Wilson 18 Apr '01

18 Apr '01

Hi everyone, It seems like it's not possible to create a CatalogAware ZClass that automatically catalogs itself in anything other than a ZCatalog named 'Catalog'. Is that the case? Does a rule of thumb exist to help decide when you should us a 'Catalog' in your Zope's root folder and when it would be better to use a custom 'FooCatalog' in a subfolder somewhere for specific purposes. For example, I've created a catalogaware ZClass to store breakfast and lunch menus for our schools. I'd like to query a ZCatalog somewhere to pull out a menu for a certain day or a range of days. Would it promote catalog-bloat (if such a thing exists) to store those in the root 'Catalog' with all of the resulting indexes and meta data? -Tim -- Tim Wilson | Visit Sibley online: | Check out: Henry Sibley HS | http://www.isd197.k12.mn.us/ | http://www.zope.org/ W. St. Paul, MN | | http://slashdot.org/ wilson(a)visi.com | <dtml-var pithy_quote> | http://linux.com/

4 3

Re: [Zope] Continuing Woe with Win98 (but Zope V1.10.3 works!)
by jimbo 18 Apr '01

18 Apr '01

localhost can be misleading. it's even worse in a hybrid network using WINS/DNS. From my experience I don't start it as a service that way I can see the DOS box. Normally I can see what port and the name of the machine when I start zope. You might have a name resolution problem so I would try using http://machinename:8080 or http://127.0.0.1:8080. Also assuming you have TCP/IP properly initialized on that machine. If everything still seems in order you either try debug mode or run a freeware port scanner on the machine to see if that port is already open. Topcheese ---------- Original Message ---------------------------------- From: Paul Browning <paul.browning(a)bristol.ac.uk> Date: Tue, 17 Apr 2001 22:32:28 +0100 > >A while back I reported a problem with Zope under Win98. The >symptoms are that everything looks OK in the MS-DOS command >window but that when you try and browse to http://localhost:8080 >then nothing happens. > >A number of people made useful suggestions including making sure >the was an entry in the Windoze LMHOSTS file but to no avail. > >As Zope did _once_ work on this particular PC I went back to >Zope 2.1.6 as I had a hunch that this was version I had originally >tried (the problems on started when I upgraded to a later version). > >However, no luck. > >Then, just for the hell of it, I installed Zope 1.10.3. IT WORKS >(over port 9673)! > >Zope V1 isn't alot of use to me, but I thought I'd report >my findings in case it causes any flashes of deduction amongst Windows >gurus out there which might lead to a resolution of the problem. > >For the record, the M$ Personal Web Server (or whatever it's called), >works just fine - browsing to http://localhost does what you'd >expect. > >Cheers. > >Paul > >-- > The Library, Tyndall Avenue, Univ. of Bristol, Bristol, BS8 1TJ, UK > E-mail: paul.browning(a)bristol.ac.uk URL: http://www.bris.ac.uk/ > > >_______________________________________________ >Zope maillist - Zope(a)zope.org >http://lists.zope.org/mailman/listinfo/zope >** No cross posts or HTML encoding! ** >(Related lists - > http://lists.zope.org/mailman/listinfo/zope-announce > http://lists.zope.org/mailman/listinfo/zope-dev ) >

1 0

zope rant
by Win GO 18 Apr '01

18 Apr '01

could anyone please comment regarding this link: http://www.amk.ca/python/writing/why-not-zope.html it's an article i read on why not to use zope. i just want to know if the author's rants are justified. TIA __________________________________ www.edsamail.com

10 16

What do you use for document management?
by Loren Stafford 18 Apr '01

18 Apr '01

I need to implement/acquire a document management system (for chip engineering docs) that works well with Zope. I have no experience in the field of DMS, so can someone point me in a good direction. I know there are humongous packages available for megabucks, but my company is not in a position to pay for one of those. I'm hoping for a more modest solution both in scope and cost -- would OpenSource be too much to hope for? -- Loren

2 2

newbie: cannot connect to localhost after installing
by David Little 18 Apr '01

18 Apr '01

I have installed 2.3.1 & zserver from the rpm on Mandrake 7.2 (freq) running "/etc/init.d/zope start" as root seems to work. In the browser "http://localhost:8080/manage" results in an error message "cannot connect to localhost" But there is a kpm process 542 zope /usr/bin/python z2.py -u zope -z /usr/share/zope -Z /var/run/zwatchdog.pid -w 8080 -f 8021 -m -l /var/log/zope which presumably means the zserver is running on 8080 Any suggestions? -- David Little

2 1

Re: [Zope] Zope support through the community
by Itai Tavor 18 Apr '01

18 Apr '01

Chris McDonough wrote: > > > There seems to be danger that this great support through a community > > > member will have a fate similar to Tino's "in" patch: >> >> What has happened to that? > >Evan put up a proposal derived from Tino's patch at >http://dev.zope.org/Wikis/DevSite/Proposals/PrefixedTagVariables ... >it's not quite the same but it serves the same purpose. Yeah, and it also breaks the code of everyone who adopted Tino's patch, unless we continue to update and apply the patch even after DC's fix is in. DC ignored the community's requests for a fix, as well as community-supplied patches, for a long time. So the community dealt with the problem in the open source spirit - Tino gave us a very nice and simple patch, and we gratefully adopted it. Now that DC finally wake up, they come up with a solution that penalizes everyone who did not just sit there waiting for DC to offer a fix. And what's their justification for this? That some people might have defined variables named 'sequence_index' or 'sequence_item'. Everybody please stand up who ever defined such a variable. Ok, rant over. So I need more sleep. And a vacation. Itai -- -- Itai Tavor -- "Je sautille, donc je suis." -- itai(a)optusnet.com.au -- - Kermit the Frog -- -- -- -- "If you haven't got your health, you haven't got anything" --

1 0

RE: [Zope] Zope service network permissions on NT
by Capesius, Alan 17 Apr '01

17 Apr '01

ODBC DSNs don't require drive mappings, use UNC names by typing them into the filename prompt. To map drives under the service's login account, login to the machine as the service account and map the drives. This will however prevent you from unmapping the same drives as a different user from the desktop. This can be very confusing if you are not aware of what is going on. I don't use NFS so I can't address that specifically, but try the UNC's (sometimes you can sub them in the settings file even when the GUI doesn't allow the config.) Alan >>>-----Original Message----- >>>From: Loren Stafford [mailto:lstafford@morphics.com] >>>Sent: Tuesday, April 17, 2001 12:31 PM >>>2. ODBC connections to databases on other hosts. The ODBC >>>driver forces you >>>to specify connections in terms of drive mappings (e.g. >>>f:\phonelist.mdb). >>>But after startup, when no one is logged in, there is no >>>active user profile >>>containing drive mappings. Therefore, the ODBC connections >>>are broken. >>> >>>3. NFS Maestro mounts. The Maestro driver also forces you to specify >>>connections in terms of drive mappings -- with the same >>>problems as #2. >>> >>>Does anyone know how to configure NT, Zope, or the Zope >>>service so that >>>connection types #2 and #3 don't break when no one is logged in. >>> >>>-- Thanks >>>-- Loren >>> >>> >>>_______________________________________________ >>>Zope maillist - Zope(a)zope.org >>>http://lists.zope.org/mailman/listinfo/zope >>>** No cross posts or HTML encoding! ** >>>(Related lists - >>> http://lists.zope.org/mailman/listinfo/zope-announce >>> http://lists.zope.org/mailman/listinfo/zope-dev ) >>>

2 1