Zope-Dev September 2004

zope-dev@zope.dev

31 participants
34 discussions

ZPT Optimization Opportunity
by Tres Seaver 27 Sep '04

27 Sep '04

After seeing Chris McDonough's excellent paper at the Plone conference on optimizing content delivery using the new IStreamIterator iterface, I began experimenting with implementing such an optimization in ZopePageTemplates. I played around with having 'ZopePageTemplate._exec' request that it receive an iterator, instead of the usual big string. I hoped that such a change might enable greater concurrency and memory footprint, by avoiding creation of the big string at all; instead, medusa to push out the "chunk stream" represented by the StringIO buflist, while the appserver would be free to handle a new request without needing to malloc / copy the data. Here are the timings I have seen so far, using 'zopectl debug', with the following template: --------------- Template source -------------------------------- <html> <body> <div tal:repeat="item python:[x for x in range(1000)]" tal:content="item">ITEM</div> </body> </html> ---------------------------------------------------------------- --------------- Before the patch ------------------------------- >>> Zope.debug('/test_iter', t=1) 250.2 milliseconds >>> Zope.debug('/test_iter', t=1) 106.7 milliseconds >>> Zope.debug('/test_iter', t=1) 106.5 milliseconds >>> Zope.debug('/test_iter', t=1) 124.6 milliseconds ---------------------------------------------------------------- --------------- After the patch -------------------------------- >>> Zope.debug('/test_iter', t=1) 249.2 milliseconds >>> Zope.debug('/test_iter', t=1) 107.2 milliseconds >>> Zope.debug('/test_iter', t=1) 125.0 milliseconds >>> Zope.debug('/test_iter', t=1) 162.1 milliseconds ---------------------------------------------------------------- Given that the performance looks similar in this context, which doesn't benefit from the medusa / concurrency intent of the patch, it seems as though it might be a win (of *course* there aren't any tests for it!) I am attaching the patch I have so far for review and comment. Tres. -- =============================================================== Tres Seaver tseaver(a)zope.com Zope Corporation "Zope Dealers" http://www.zope.com

5 10

Survey on Open Source
by Mike Chan 26 Sep '04

26 Sep '04

Dear all, I am conducting a survey on open source software. This is for my academic coursework and dissertation. It will be great to have your support and participation in this survey. This survey has two separate questionnaires, focusing on the following areas: 1) OSS development (Developers or those who contribute in coding or documentation), and 2) IT/IS costs (CIOs or IT Managers). You are free to go for the questionnaire that is appropriate for you. Below are the links: 1) Brief introduction page: http://web.singnet.com.sg/~mikecck/opensource/Introduction1.htm 2) Questionnaire 1(Open Source Development): http://web.singnet.com.sg/~mikecck/opensource/WebFormA1.htm 3) Questionnaire 2(Open Source and IT/IS Cost): http://web.singnet.com.sg/~mikecck/opensource/WebFormB1.htm Thank you for your time. Mike Chan Student Curtin University of Technology

1 0

September Bug Day Roundup
by Chris Withers 25 Sep '04

25 Sep '04

Hi All, Well, it looks like another bumper crop, not quite eclipsing the 60 issues in July's bug day, but still, 32 issues got dealt with including 9 resolved issues. 2 of those had seen lots of work throughout the month and it was great to finally put them to bed. Session stuff and what-happens-to-transactions-when-errors-get-handled-by-ZPublisher both seem to have been resolved, and make 2.7.3 quite a compelling prospect once Andreas gets a chance to release it. Anyway, thanks to everyone who helped out, look forward to seeing you all (and more) next month... cheers, Chris The lowdown as before: Resolved: #789 - Zope's transaction behaviour flawed #819 - No id returned after import #820 - ZCTextIndex: broken link in manageZCTextIndex.dtml #982 - CMF FSDV skins differ across unix/windows #1401 - SystemError in SessionDataManager #1457 - ZCTextIndex: QueryError and ParseError not available for import #1473 - zpasswd.py: username from command line and password from tty #1479 - browser time out viewing index tab of ZCatalog #1483 - error in documentation for fast-cgi configuration Rejected: #821 - ZCTextIindex: Vocabulary query page problem #973 - BaseStorage.tpc_finish does not release ZODB.DB lock #992 - ZCatalog weirdness when a cookie has the same ID as an index #985 - import Testing changes attributes available to Zope.app() #994 - Precondition property cannot be set #1009 - Zope 2.7b1 problems with refreshing products #1022 - zpt barfs on <script>document.write("<script>") workaround #1455 - Transient Obj Container: values always resetted after a restart #1482 - weird problem with ZMySQLDA #1499 - misunderstanding of MailHost's send method Wontfix: #1502 - KDE's Konquerer won't FTP .jpg properly Deferred: (meaning act on these or they get rejected next month) #551 - ExtentionClass.h might conflict with other system versions #576 - Importing ZClass fails #679 - ZPT: bogus close tag </link> should be removed #721 - ZPT escapes attributes when it shouldn't #745 - zope2.6.1b1 and zclass #764 - ZCTextIndex does work in enumerateIndexes() #808 - Site Access Rule not working with dtml method in 2.6.1 #881 - Error: The ZGadflyDA product must be installed #912 - import of PythonScript causes unseemly failure #941 - Emergency user can own objects in Zope 2.7 #971 - Version only saves the last change #995 - zope/python seg fault with infinite __str__ recursion And here's the "player stats" ;-) Resolved Rejected Wontfixed Deferred Assists chrisw 5 2 10 ajung 2 3 1 mcdonc 1 1 tim_one 1 regebro 5 2 tseaver 2 yuppie 1 dunny 1 -- Simplistix - Content Management, Zope & Python Consulting - http://www.simplistix.co.uk

1 0

NOT operator in Unindex.
by Johan Carlsson 24 Sep '04

24 Sep '04

Hi, I've been hacking FieldIndex and KeywordIndex to allow it to take the operator not to exclude object that matches from the result. As it seems to me it would be possible to patch the Unindex with the changes I've made. Is this something that could be added to the core? Examples of special not-enabled indexes: http://zope.org/Members/Colliberty/Easy%20Pieces/EasyIndexes/EasyIndexes-0-…

3 2

Re: [Zope-dev] NOT operator in Unindex.
by Johan Carlsson 24 Sep '04

24 Sep '04

Andreas Jung wrote: > Why don't you use AdvancedQuery+ManageableIndes by DM? Sure. Why would that be preferred? And is there any chance of AdvancedQuery+ManageableIndes will make it to the Zope Core? My exampel extends Field- and KeywordIndex and any other index based on Unindex without changing backward compatability. I don't see a reason why this couldn't be included to the Zope Core in a short term. Regards, Johan Carlsson -- Johan Carlsson Tel: + 46 8 31 24 94 Colliberty Mob: + 46 70 558 25 24 Torsgatan 72 Email: johanc(a)easypublisher.com SE-113 37 STOCKHOLM

2 1

2.7 branch: attribute permission problems
by Richard Jones 22 Sep '04

22 Sep '04

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 [might dupe - sent the first copy of this from the wrong address, sorry!] I've just upgraded to use the bleeding-edge 2-7 branch (from 2.7.2, running in py 2.3.3) and I've started getting permission problems with attributes. The cause appears to be acquired attributes. With VerboseSecurity installed (note: behaviour not dependent on VS - I checked), I get told: Error Type: Unauthorized Error Value: The container has no security assertions. Access to 'secure_url' of (CG Conference Proposals proposals at 0x41387b40) denied. The "secure_url" attribute is defined at a much higher object, where we have a declaration including: security.setDefaultAccess({'secure_url': 1}) On the "proposals" object though, we don't have any delaration for the "secure_url" attribute. If I add one, or a general security.setDefaultAccess("allow"), then the error goes away. This doesn't seem correct to me. The relevant change in CVS appears to be: *** ../../../../Zope-2.7.2/lib/python/AccessControl/ImplPython.py 2004-02-10 17:46:02.000000000 +1100 - --- AccessControl/ImplPython.py 2004-09-15 09:59:41.617423171 +1000 *************** *** 551,560 **** return v validate = SecurityManagement.getSecurityManager().validate - - # Filter out the objects we can't access. - - if hasattr(inst, 'aq_acquire'): - - return inst.aq_acquire(name, aq_validate, validate) - - # Or just try to get the attribute directly. if validate(inst, inst, name, v): return v raise Unauthorized, name - --- 551,556 ---- The change note being "- Removed DWIM'y attempt to filter acquired-but-not-aceessible results from 'guarded_getattr'." and I'm not sure what that means :) Richard -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.4 (GNU/Linux) iD8DBQFBR5hnrGisBEHG6TARAuucAJ42D8pU6kuPQ+mBwadqJq8uQbG12gCggN2u AzBBhs5eCekTdl6bYtyBrCk= =aUXn -----END PGP SIGNATURE-----

4 13

Multi-part export files
by Johan Carlsson 22 Sep '04

22 Sep '04

Hi Y'all, I have currently implemented a object repository which uses dynamic Acquisition wrapping to create an illusion of a object hierarchy. This means that sub object isn't contained in there parents rather in the repository and this effectively breaks export/import behavior and other behavior that rely in it such as CopySupport. After doing some testing I've noticed that I can "stack" export files in the same file by just keeping the file open between the calls to exportFile (and the same for importFile). In this way I could stack a number of export files in one file (this could be used to export a set of object in a Folder in one file so it might be useful for Zope Core as well). Now the problem is that the import has no way to know where to create the object, in my case I can let the repository handle this using meta data in the objects. The repository has a fixed structure, but in regular OFS the structure might vary from system to system. It could be used to import all object to the current folder, if name collision are taken care of. Any thought on this? Anybody done something remotely similar? Could this be a useful feature in Zope core someway? Best Regards, Johan Carlsson -- Johan Carlsson Tel: + 46 8 31 24 94 Colliberty Mob: + 46 70 558 25 24 Torsgatan 72 Email: johanc(a)easypublisher.com SE-113 37 STOCKHOLM

1 0

Transferring the word document/Excel sheet or Pdf file through SOAP
by Aruna Kathiriya 21 Sep '04

21 Sep '04

Hello: I want to transfer the word document/excel or PDF file across the net through SOAP call. I already establish the connection with two Zope servers with SOAP call. Now I want to transfer any type of file to the server as a parameter of a method. I could transfer the XPDL and text file but not word document, excel or PDF file. Pl let me know if there is any suggession or way to achive this. Aruna Kathiriya Sr.Consultant, CIGNEX Technologies, Inc T: 408.501.0455 x 306 F: 408.273.6785 C: 408.896.1330 E: aruna(a)cignex.com U: www.cignex.com "Implement IT Right"

1 0

using VirtualHostMonster in a ZPublisher python module?
by Royce 21 Sep '04

21 Sep '04

Hi all, Can I somehow get a VirtualHostMonster inserted into a ZPublisher-based python module published through changes to z2.py? Am having problems with "<base href…>" with apache proxying for this python module. Have scoured past discussions but haven't found an answer to this. I have two areas declared to zhttp_handler(): 1. /z -- standard managed zope area 2. /app -- my python module which is a ZPublisher-based app that doesn't have /manage or the other "managed zope" stuff For #2 I modified z2.py per Amos' write up: "How to Publish Your Own Python Modules" (http://www.zope.org/Members/Amos/ZPublisher) ... (thanks, Amos!). But I can't get the "base href" set properly for this. Changes to z2.py shown below. I really appreciate any light people can shed on this. Am willing to pay for help on this. Thanks! Royce p.s. alternately I could import the python module as an ExternalMethod but have had serious import problems when doing so. ~~~~~~~~~~~ In z2.py I have: zh = zhttp_handler(MODULE, 'z', HTTP_ENV) hs.install_handler(zh) # royce 8/22/04 sys.path.insert(0,'/app') # add MyModule to the Python path # create a handler my_handler = zhttp_handler('webapp/sessionMgr', 'ex/sessionMgr', HTTP_ENV) hs.install_handler(my_handler) # install it in the http server

3 6

Announce: September Zope Bug Day!
by Chris Withers 21 Sep '04

21 Sep '04

Hi All, A bit late on the announcement again, but with Andreas back (iirc) and myself being able to devote a full day, this should be a bit more of an enthusiastic bug day. What? Zope Bug Day working from http://collector.zope.org/Zope When? Friday 24th September - from when you wake up until when the day ends! Where? #zope-dev on irc.zope.org Come along and help if you've got a chance! Read this if you want to know how: http://dev.zope.org/CVS/BugDays cheers, Chris -- Simplistix - Content Management, Zope & Python Consulting - http://www.simplistix.co.uk

1 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

Zope-Dev September 2004